§ 59.507. What are the labeling requirements for aerosol coatings?
185 words·~1 min read·
/us/cfr/t40/s§ 59.507·A research copy — for the controlling text, always check the official state or federal source. Not legal advice.
(a)The labels of all aerosol products manufactured on and after the applicable compliance date listed in § 59.502 must contain the information listed in paragraphs (a)(1) through
(4)of this section.
(1)The aerosol coating category code for the coating, based on the category definitions in § 59.503. This code can be the default category code shown in Table 1 of this subpart or a company-specific code, if that code is explained as required by § 59.511(a);
(2)The applicable PWR limit for the product specified in Table 1 of this subpart;
(3)The day, month, and year on which the product was manufactured, or a code indicating such date;
(4)The name and a contact address for the manufacturer, distributor, or importer that is the regulated entity under this subpart.
(b)The label on the product must be displayed in such a manner that it is readily observable without removing or disassembling any portion of the product container or packaging. The information may be displayed on the bottom of the container as long as it is clearly legible without removing any product packaging.