§ 1192.175. High-speed rail cars, monorails and systems.
212 words·~1 min read·
/us/cfr/t36/s§ 1192.175·A research copy — for the controlling text, always check the official state or federal source. Not legal advice.
(a)All cars for high-speed rail systems, including but not limited to those using "maglev" or high speed steel-wheel-on-steel-rail technology, and monorail systems operating primarily on dedicated rail (i.e., not used by freight trains) or guideway, in which stations are constructed in accordance with subpart C of 49 CFR part 37, shall be designed for high-platform, level boarding and shall comply with § 1192.111(a) for each type of car which is similar to intercity rail, §§ 1192.111(d), 1192.113
(a)through
(c)and (e), 1192.115
(a)and (b), 1192.117
(a)and (b), 1192.121 through 1192.123, 1192.125(d), and 1192.127 (if applicable). The design of cars shall be coordinated with the boarding platform design such that the horizontal gap between a car door at rest and the platform shall be no greater than 3 inches and the height of the car floor shall be within plus or minus 5/8 inch of the platform height under all normal passenger load conditions. Vertical alignment may be accomplished by car air suspension or other suitable means of meeting the requirement. All doorways shall have, when the door is open, at least 2 foot-candles of illumination measured on the door threshold.
(b)All other high-speed rail cars shall comply with the similar provisions of subpart F of this part.
Connections1 off-index
1 reference not yet in our index
- 49 CFR 37
Citation graph
cites case law
§ 1192.175
High-speed rail cars, monorails and systems.
Cite49 CFR 37
Cites 1Cited by 0 across 0 sources