§ 1192.173. Automated guideway transit vehicles and systems.
209 words·~1 min read·
/us/cfr/t36/s§ 1192.173·A research copy — for the controlling text, always check the official state or federal source. Not legal advice.
(a)Automated Guideway Transit
(AGT)vehicles and systems, sometimes called "people movers", operated in airports and other areas where AGT vehicles travel at slow speed, shall comply with the provisions of §§ 1192.53
(a)through (c), and 1192.55 through 1192.61 for rapid rail vehicles and systems.
(b)Where the vehicle covered by paragraph
(a)of this section will operate in an accessible station, the design of vehicles shall be coordinated with the boarding platform design such that the horizontal gap between a vehicle door at rest and the platform shall be no greater than 1 inch and the height of the vehicle floor shall be within plus or minus 1/2 inch of the platform height under all normal passenger load conditions. Vertical alignment may be accomplished by vehicle air suspension or other suitable means of meeting the requirement.
(c)In stations where open platforms are not protected by platform screens, a suitable device or system shall be provided to prevent, deter or warn individuals from stepping off the platform between cars. Acceptable devices include, but are not limited to, pantograph gates, chains, motion detectors or other appropriate devices.
(d)Light rail and rapid rail AGT vehicles and systems shall comply with subparts D and C of this part, respectively.