§ 33.96. Engine tests in auxiliary power unit (APU) mode.
269 words·~1 min read·
/us/cfr/t14/s§ 33.96·A research copy — for the controlling text, always check the official state or federal source. Not legal advice.
If the engine is designed with a propeller brake which will allow the propeller to be brought to a stop while the gas generator portion of the engine remains in operation, and remain stopped during operation of the engine as an auxiliary power unit (“APU mode”), in addition to the requirements of § 33.87, the applicant must conduct the following tests:
(a)Ground locking: A total of 45 hours with the propeller brake engaged in a manner which clearly demonstrates its ability to function without adverse effects on the complete engine while the engine is operating in the APU mode under the maximum conditions of engine speed, torque, temperature, air bleed, and power extraction as specified by the applicant.
(b)Dynamic braking: A total of 400 application-release cycles of brake engagements must be made in a manner which clearly demonstrates its ability to function without adverse effects on the complete engine under the maximum conditions of engine acceleration/deceleration rate, speed, torque, and temperature as specified by the applicant. The propeller must be stopped prior to brake release.
(c)One hundred engine starts and stops with the propeller brake engaged.
(d)The tests required by paragraphs (a), (b), and
(c)of this section must be performed on the same engine, but this engine need not be the same engine used for the tests required by § 33.87.
(e)The tests required by paragraphs (a), (b), and
(c)of this section must be followed by engine disassembly to the extent necessary to show compliance with the requirements of § 33.93(a) and § 33.93(b). [Amdt. 33-11, 51 FR 10346, Mar. 25, 1986]