347.12 Use of multiple-beam headlamps.

229 words·~1 min read·/wi/chapter-347/347-12

A research copy — for the controlling text, always check the official state or federal source. Not legal advice.

(1)Whenever a motor vehicle is being operated on a highway during hours of darkness or during a period of limited visibility, the operator shall use a distribution of light or composite beam directed high enough and of sufficient intensity to reveal a person or vehicle at a safe distance in advance of the vehicle, subject to the following requirements and limitations:

(a)Whenever the operator of a vehicle equipped with multiple-beam headlamps approaches an oncoming vehicle within 500 feet, the operator shall dim, depress or tilt the vehicle’s headlights so that the glaring rays are not directed into the eyes of the operator of the other vehicle. This paragraph does not prohibit an operator from intermittently flashing the vehicle’s high-beam headlamps at an oncoming vehicle whose high-beam headlamps are lit.

(b)Whenever the operator of a vehicle equipped with multiple-beam headlamps approaches or follows another vehicle within 500 feet to the rear, the operator shall dim, depress, or tilt the vehicle’s headlights so that the glaring rays are not reflected into the eyes of the operator of the other vehicle. This paragraph does not prohibit an operator from intermittently flashing the vehicle’s high-beam headlamps as provided under par.

(a).

(2)Subsection

(a)and

(b)does not apply to the use of alternately flashing or pulsating headlamps under s. 347.25

(1r).