§ 14522. Measurement
305 words·~1 min read·
/usc/title-46/section-14522A research copy — for the controlling text, always check the official state or federal source. Not legal advice.
(a)In this section, “length” means the horizontal distance of the hull between the foremost part of the stem and the aftermost part of the stern, excluding fittings and attachments.
(1)The Secretary shall assign gross and net tonnages to a vessel based on its length, breadth, depth, other dimensions, and appropriate coefficients.
(2)The Secretary shall prescribe the way dimensions (except length) are measured and which coefficients are appropriate.
(c)The resulting gross tonnages, taken as a group, reasonably shall reflect the relative internal volumes of the vessels measured under this subchapter. The resulting net tonnages shall be in approximately the same ratios to corresponding gross tonnages as are the net and gross tonnages of comparable vessels measured under subchapter II of this chapter.
(d)Under regulations prescribed by the Secretary, the Secretary may determine the gross and net tonnages of a vessel representative of a designated class, model, or type, and then assign those gross and net tonnages to other vessels of the same class, model, or type.
(Pub. L. 99–509, title V, § 5101(3), Oct. 21, 1986, 100 Stat. 1925.)
Historical and Revision Notes
Revised section 14522
Source: Section (U.S. Code) 46 App. U.S.C. 71.
Section 14522(a) defines the term “length” as it is used in the simplified measurement system.
Section 14522(b) requires the Secretary to assign gross and net tonnages under the simplified system, based on a vessel’s length, breadth, depth, other dimensions and appropriate coefficients, as the Secretary deems appropriate.
Section 14522(c) provides that the gross tonnages as measured under this section shall reflect the relative internal volumes of vessels. It provides further that the net tonnages measured under this section shall be in approximately the same ratio to corresponding gross tonnages as are the net and gross tonnages of comparable vessels measured under the standard regulatory measurement system.
Connections2 cite this
2 references not yet in our index
- Pub. L. 99–509, title V, § 5101(3)
- 100 Stat. 1925
Citation graph
cites case law
§ 14522
Measurement
Fed. Reg.×1
Stat.×1
Pub. L.Pub. L. 99–509, title V, § 5101(3)
Stat.100 Stat. 1925
Cites 2Cited by 2 across 2 sources