§ 63.2267. Initial compliance demonstration for a reconstituted wood product press or board cooler.
118 words·~1 min read·
/us/cfr/t40/s§ 63.2267·A research copy — for the controlling text, always check the official state or federal source. Not legal advice.
If you operate a reconstituted wood product press at a new or existing affected source or a reconstituted wood product board cooler at a new affected source, then you must either use a wood products enclosure as defined in § 63.2292 or measure the capture efficiency of the capture device for the press or board cooler using Methods 204 and 204A through 204F of 40 CFR part 51, appendix M (as appropriate), or using the alternative tracer gas method contained in appendix A to this subpart.
You must submit documentation that the wood products enclosure meets the press enclosure design criteria in § 63.2292 or the results of the capture efficiency verification with your Notification of Compliance Status.
Connections1 cite this
Cited by 1 section
register
1 reference not yet in our index
- 40 CFR 51
Citation graph
cites case law
§ 63.2267
Initial compliance demonstration for a reconstituted wood product press or board cooler.
Fed. Reg.×1
Cite40 CFR 51
Cites 1Cited by 1 across 1 source