§ 60.103. Standard for carbon monoxide.
142 words·~1 min read·
/us/cfr/t40/s§ 60.103·A research copy — for the controlling text, always check the official state or federal source. Not legal advice.
Each owner or operator of any fluid catalytic cracking unit catalyst regenerator that is subject to the requirements of this subpart shall comply with the emission limitations set forth in this section on and after the date on which the initial performance test, required by § 60.8, is completed, but not later than 60 days after achieving the maximum production rate at which the fluid catalytic cracking unit catalyst regenerator will be operated, or 180 days after initial startup, whichever comes first.
(a)No owner or operator subject to the provisions of this subpart shall discharge or cause the discharge into the atmosphere from any fluid catalytic cracking unit catalyst regenerator any gases that contain carbon monoxide
(CO)in excess of 500 ppm by volume (dry basis). [54 FR 34027, Aug. 17, 1989, as amended at 55 FR 40175, Oct. 2, 1990]
Connections54 cite this
Cited by 54 sections · top 8
Citation graph
cites case law
§ 60.103
Standard for carbon monoxide.
Fed. Reg.×54
Cites 0Cited by 54 across 1 source