§ 59.412. Incorporations by reference.
388 words·~2 min read·
/us/cfr/t40/s§ 59.412·A research copy — for the controlling text, always check the official state or federal source. Not legal advice.
(a)The materials listed in this section are incorporated by reference in the paragraphs noted in § 59.401. These incorporations by reference were approved by the Director of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. These materials are incorporated as they exist on the date of the approval, and notice of any changes in these materials will be published in the Federal Register. The materials are available for purchase at the corresponding addresses noted below, and all are available for inspection at the Air and Radiation Docket and Information Center, U.S. EPA, 401 M St., SW., Washington, DC 20460; at the EPA Library (MD-35), U.S. EPA, Research Triangle Park, North Carolina; or at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html.
(b)The materials listed below are available for purchase at the following address: American Society for Testing and Materials (ASTM), 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959.
(1)ASTM Method C 1315-95, Standard Specification for Liquid Membrane-Forming Compounds Having Special Properties for Curing and Sealing Concrete, incorporation by reference approved for § 59.401, Concrete curing and sealing compound.
(2)ASTM Method D 523-89, Standard Test Method for Specular Gloss, incorporation by reference approved for § 59.401, Flat coating and Nonflat coating.
(3)ASTM Method D 1640-83 (Reapproved 1989), Standard Test Methods for Drying, Curing, or Film Formation of Organic Coatings at Room Temperature, incorporation by reference approved for § 59.401, Quick-dry enamel and Quick-dry primer, sealer, and undercoater.
(4)ASTM Method D 3912-80 (Reapproved 1989), Standard Test Method for Chemical Resistance of Coatings Used in Light-Water Nuclear Power Plants, incorporation by reference approved for § 59.401, Nuclear coating.
(5)ASTM Method D 4082-89, Standard Test Method for Effects of Gamma Radiation on Coatings for Use in Light-Water Nuclear Power Plants, incorporation by reference approved for § 59.401, Nuclear coating.
(c)The following material is available from the AAMA, 1827 Walden Office Square, Suite 104, Schaumburg, IL 60173.
(1)AAMA 605-98, Voluntary Specification Requirements and Test Procedures for High Performance Organic Coatings on Aluminum Extrusions and Panels, incorporation by reference approved for § 59.401, Extreme high durability coating.
(2)[Reserved] [63 FR 48877, Sept. 11, 1998, as amended at 69 FR 18803, Apr. 9, 2004]
Connectionstraces to 1
Traces to 1 document
1 reference not yet in our index
- 1 CFR 51
Citation graph
cites case law
Cites 2Cited by 0 across 0 sources