§ 183.584. Shock test.
247 words·~1 min read·
/us/cfr/t33/s§ 183.584·A research copy — for the controlling text, always check the official state or federal source. Not legal advice.
A fuel tank is tested by performing the following procedures in the following order:
(a)Perform the static pressure test under § 183.580.
(b)If the tank is non-metallic, fill it to capacity with a gasoline that has at least a 50 percent aromatic content. Keep the fuel in the tank at 21 °C or higher for 30 days prior to testing.
(c)Mount the tank to the platform of an impact test machine.
(d)Fill the tank to capacity with water.
(e)Apply one of the following accelerations within three inches of the center of the horizontal mounting surface of the tank. The duration of each vertical acceleration pulse is measured at the base of the shock envelope.
(1)If the tank is not labeled under § 183.514(b)(8) for installation aft of the half length of the boat, apply 1000 cycles of 25g vertical accelerations at a rate of 80 cycles or less per minute. The duration of the acceleration pulse must be between 6 and 14 milliseconds.
(2)If the tank is manufactured for installation with its center of gravity aft of the half length of the boat, apply 1000 cycles of 15g vertical accelerations at a rate of 80 cycles or less per minute. The duration of the shock pulse must be between 6 and 14 milliseconds.
(f)Perform the static pressure test under § 183.580. \[CGD 74-209, 42 FR 5950, Jan. 31, 1977, as amended by USCG-1999-5832, 64 FR 34716, June 29, 1999\]