§ 816.13. Casing and sealing of drilled holes: General requirements.
173 words·~1 min read·
/us/cfr/t30/s§ 816.13·A research copy — for the controlling text, always check the official state or federal source. Not legal advice.
Each exploration hole, other drill or borehole, well, or other exposed underground opening shall be cased, sealed, or otherwise managed, as approved by the regulatory authority, to prevent acid or other toxic drainage from entering ground or surface waters, to minimize disturbance to the prevailing hydrologic balance, and to ensure the safety of people, livestock, fish and wildlife, and machinery in the permit area and adjacent area. If these openings are uncovered or exposed by surface mining activities within the permit area they shall be permanently closed, unless approved for water monitoring, or otherwise managed in a manner approved by the regulatory authority.
Use of a drilled hole or borehole or monitoring well as a water well must meet the provisions of § 816.41 of this part. This section does not apply to holes solely drilled and used for blasting. \[44 FR 15395, Mar. 13, 1979, as amended at 48 FR 14822, Apr. 5, 1983; 48 FR 43990, Sept. 26, 1983; 81 FR 93392, Dec. 20, 2016; 82 FR 54979, Nov. 17, 2017\]
Connections22 cite this
Cited by 22 sections · top 8
Citation graph
cites case law
§ 816.13
Casing and sealing of drilled holes: General requirements.
Fed. Reg.×21
C.F.R.×1
Cites 0Cited by 22 across 2 sources