§ 780.37. Road systems.
401 words·~2 min read·
/us/cfr/t30/s§ 780.37·A research copy — for the controlling text, always check the official state or federal source. Not legal advice.
(a)Plans and drawings. Each applicant for a surface coal mining and reclamation permit shall submit plans and drawings for each road, as defined in § 701.5 of this chapter, to be constructed, used, or maintained within the proposed permit area. The plans and drawings shall---
(1)Include a map, appropriate cross sections, design drawings and specifications for road widths, gradients, surfacing materials, cuts, fill embankments, culverts, bridges, drainage ditches, low-water crossings, and drainage structures;
(2)Contain the drawings and specifications of each proposed road that is located in the channel of an intermittent or perennial stream, as necessary for approval of the road by the regulatory authority in accordance with § 816.150(d)(1) of this chapter;
(3)Contain the drawings and specifications for each proposed ford of perennial or intermittent streams that is used as a temporary route, as necessary for approval of the ford by the regulatory authority in accordance with § 816.151(c)(2) of this chapter;
(4)Contain a description of measures to be taken to obtain approval of the regulatory authority for alteration or relocation of a natural stream channel under § 816.151(d)(5) of this chapter;
(5)Contain the drawings and specifications for each low-water crossing of perennial or intermittent stream channels so that the regulatory authority can maximize the protection of the stream in accordance with § 816.151(d)(6) of this chapter; and
(6)Describe the plans to remove and reclaim each road that would not be retained under an approved postmining land use, and the schedule for this removal and reclamation.
(b)Primary road certification. The plans and drawings for each primary road shall be prepared by, or under the direction of, and certified by a qualified registered professional engineer, or in any State which authorizes land surveyors to certify the design of primary roads a qualified registered professional land surveyor, with experience in the design and construction of roads, as meeting the requirements of this chapter; current, prudent engineering practices; and any design criteria established by the regulatory authority.
(c)Standard design plans. The regulatory authority may establish engineering design standards for primary roads through the State program approval process, in lieu of engineering tests, to establish compliance with the minimum static safety factor of 1.3 for all embankments specified in § 816.151(b) of this chapter. \[53 FR 45211, Nov. 8, 1988, as amended at 81 FR 93330, Dec. 20, 2016; 82 FR 54949, Nov. 17, 2017\]
Connections17 cite this
Cited by 17 sections · top 7
register
- NoticesFinal rule; approval of amendment
- Proposed RulesProposed rule; public comment period and opportunity for public hearing
- Rules and RegulationsFinal rule; approval of amendment
- Rules and RegulationsFinal rule; approval of amendment with four exceptions
- NoticesFinal rule; approval of amendment
- Rules and RegulationsFinal rule; approval of amendment
- Rules and RegulationsFinal rule; approval of amendment
Citation graph
cites case law
§ 780.37
Road systems.
Fed. Reg.×17
Cites 0Cited by 17 across 1 source