§ 77.1916. Welding, cutting, and soldering; fire protection.
178 words·~1 min read·
/us/cfr/t30/s§ 77.1916·A research copy — for the controlling text, always check the official state or federal source. Not legal advice.
(a)One portable fire extinguisher shall be provided where welding, cutting, or soldering with arc or flame is performed.
(b)Welding, cutting, or soldering with arc or flame within or in the vicinity of any slope or shaft, except where such operations are performed in fireproof enclosures, shall be done under the supervision of a qualified person who shall make a diligent search within or in the vicinity of the slope or shaft for fire during and after such operations.
(c)Before welding, cutting, or soldering is performed in any slope or shaft designed to penetrate into any coalbed below the surface, an examination for methane shall be made by a qualified person with a device approved by the Secretary for detecting methane. Examination for methane shall be made immediately before and periodically during welding, cutting, or soldering and such work shall not be permitted to commence or continue in air which contains 1.0 volume per centum or more of methane.
(d)Noncombustible barriers shall be installed below welding, cutting, or soldering operations in or over a shaft.