§ 75.603. Temporary splice of trailing cable.
108 words·~1 min read·
/us/cfr/t30/s§ 75.603·A research copy — for the controlling text, always check the official state or federal source. Not legal advice.
\[Statutory Provision\] One temporary splice may be made in any trailing cable. Such trailing cable may only be used for the next 24-hour period. No temporary splice shall be made in a trailing cable within 25 feet of the machine, except cable reel equipment. Temporary splices in trailing cables shall be made in a workmanlike manner and shall be mechanically strong and well insulated. Trailing cables or hand cables which have exposed wires or which have splices that heat or spark under load shall not be used. As used in this section, the term "splice" means the mechanical joining of one or more conductors that have been severed.
Connections17 cite this
Cited by 17 sections
register
- NoticesNotice
- NoticesNotice
- NoticesNotice
- NoticesNotice
- NoticesNotice
- NoticesNotice
- NoticesNotice
- NoticesNotice
- Rules and RegulationsNotice
- NoticesNotice of petitions for modification of existing mandatory safety standards
- NoticesNotice of petitions for modification of existing mandatory safety standards
- NoticesNotice
- NoticesNotice
- NoticesNotice
- NoticesNotice
- NoticesNotice
- NoticesNotice of petitions for modification of existing mandatory safety standards
Citation graph
cites case law
§ 75.603
Temporary splice of trailing cable.
Fed. Reg.×17
Cites 0Cited by 17 across 1 source