§ 75.1436. Drum end attachment.
107 words·~1 min read·
/us/cfr/t30/s§ 75.1436·A research copy — for the controlling text, always check the official state or federal source. Not legal advice.
(a)For drum end attachment, wire rope shall be attached---
(1)Securely by clips after making one full turn around the drum spoke;
(2)Securely by clips after making one full turn around the shaft, if the drum is fixed to the shaft; or
(3)By properly assembled anchor bolts, clamps, or wedges, provided that the attachment is a design feature of the hoist drum. Design feature means either the manufacturer's original design or a design approved by a registered professional engineer.
(b)A minimum of three full turns of wire rope shall be on the drum when the rope is extended to its maximum working length.