§ 250.833. Specification for underwater safety valves (USVs).
211 words·~1 min read·
/us/cfr/t30/s§ 250.833·A research copy — for the controlling text, always check the official state or federal source. Not legal advice.
All USVs, including those designated as primary or secondary, and any alternate isolation valve
(AIV)that acts as a USV, if applicable, and their actuators, must conform to the requirements specified in §§ 250.801 through 250.803. A production master or wing valve may qualify as a USV under ANSI/API Spec. 6A and API Spec. 6AV1 (both incorporated by reference in § 250.198).
(a)Primary USV (USV1). You must install and designate one USV on a subsea tree as the USV1. The USV1 must be located upstream of the choke valve. As provided in paragraph
(b)of this section, you must inform BSEE if the primary USV designation changes.
(b)Secondary USV (USV2). You may equip your tree with two or more valves qualified to be designated as a USV, one of which may be designated as the USV2. If the USV1 fails to operate properly or exhibits a leakage rate greater than allowed in § 250.880, you must notify the appropriate District Office and designate the USV2 or another qualified valve (e.g., an AIV) that meets all the requirements of this subpart for USVs as the USV1. The USV2 must be located upstream of the choke. \[81 FR 61918, Sept. 7, 2016, as amended at 83 FR 49257, Sept. 28, 2018\]