§ 250.803. What SPPE failure reporting procedures must I follow?

349 words·~2 min read·/us/cfr/t30/s§ 250.803·

A research copy — for the controlling text, always check the official state or federal source. Not legal advice.

(a)You must follow the failure reporting requirements contained in section 10.20.7.4 of ANSI/API Spec. 6A for SSVs, BSDVs, GLSDVs and USVs. You must follow the failure reporting requirements contained in section 7.10 of ANSI/API Spec. 14A and Annex F of ANSI/API RP 14B for SSSVs (all incorporated by reference in § 250.198). Within 30 days after the discovery and identification of the failure, you must provide a written notice of equipment failure to the manufacturer of such equipment and to BSEE through the Chief, Office of Offshore Regulatory Programs, unless BSEE has designated a third party as provided in paragraph

(d)of this section. A failure is any condition that prevents the equipment from meeting the functional specification or purpose.

(b)You must ensure that an investigation and a failure analysis are performed within 120 days of the failure to determine the cause of the failure. If the investigation and analyses are performed by an entity other than the manufacturer, you must ensure that the analysis report is submitted to the manufacturer and to BSEE through the Chief, Office of Offshore Regulatory Programs, unless BSEE has designated a third party as provided in paragraph

(d)of this section. You must also ensure that the results of the investigation and any corrective action are documented in the analysis report.

(c)If the equipment manufacturer notifies you that it has changed the design of the equipment that failed or if you have changed operating or repair procedures as a result of a failure, then you must, within 30 days of such changes, report the design change or modified procedures in writing to BSEE through the Chief, Office of Offshore Regulatory Programs, unless BSEE has designated a third party as provided in paragraph

(d)of this section.

(d)BSEE may designate a third party to receive the data required by paragraphs

(a)through

(c)of this section on behalf of BSEE. If BSEE designates a third party, you must submit the information required in this section to the designated third party, as directed by BSEE. \[83 FR 49256, Sept. 28, 2018\]

Connections20 cite this

Cited by 20 sections · top 9

CFR

Citation graph

cites case law

§ 250.803

What SPPE failure reporting procedures must I follow?

Fed. Reg.×18

C.F.R.×2

Cites 0Cited by 20 across 2 sources