§ 18.96. Preparation of machines for inspection; requirements.
133 words·~1 min read·
/us/cfr/t30/s§ 18.96·A research copy — for the controlling text, always check the official state or federal source. Not legal advice.
(a)Upon receipt of written notice from the Health and Safety District Manager of the time and place at which a field approval investigation will be conducted with respect to any machine, the applicant will prepare the machine for inspection in the following manner:
(1)The machine shall be in fresh air out by the last open crosscut and free from obstructions, or, if the machine is located on the surface, moved to a clear area;
(2)All enclosure covers shall be removed;
(3)The flanges and interior of each enclosure, including the cover, shall be cleaned thoroughly;
(4)All hoses, cables, cord, and conveyor belts shall be wiped clean to expose surface markings;
(5)All electrical components shall be cleaned to reveal all stampings, identification plates, certification numbers, or explosion test markings.