§ 1926.32. Definitions.

530 words·~2 min read·/us/cfr/t29/s§ 1926.32·

A research copy — for the controlling text, always check the official state or federal source. Not legal advice.

The following definitions shall apply in the application of the regulations in this part:

(a)Act means section 107 of the Contract Work Hours and Safety Standards Act, commonly known as the Construction Safety Act (86 Stat. 96; 40 U.S.C. 333).

(b)ANSI means American National Standards Institute.

(c)Approved means sanctioned, endorsed, accredited, certified, or accepted as satisfactory by a duly constituted and nationally recognized authority or agency.

(d)Authorized person means a person approved or assigned by the employer to perform a specific type of duty or duties or to be at a specific location or locations at the jobsite.

(e)Administration means the Occupational Safety and Health Administration.

(f)Competent person means one who is capable of identifying existing and predictable hazards in the surroundings or working conditions which are unsanitary, hazardous, or dangerous to employees, and who has authorization to take prompt corrective measures to eliminate them.

(g)Construction work. For purposes of this section, Construction work means work for construction, alteration, and/or repair, including painting and decorating.

(h)Defect means any characteristic or condition which tends to weaken or reduce the strength of the tool, object, or structure of which it is a part.

(i)Designated person means "authorized person" as defined in paragraph

(d)of this section.

(j)Employee means every laborer or mechanic under the Act regardless of the contractual relationship which may be alleged to exist between the laborer and mechanic and the contractor or subcontractor who engaged him. "Laborer and mechanic" are not defined in the Act, but the identical terms are used in the Davis-Bacon Act (40 U.S.C. 276a), which provides for minimum wage protection on Federal and federally assisted construction contracts. The use of the same term in a statute which often applies concurrently with section 107 of the Act has considerable precedential value in ascertaining the meaning of "laborer and mechanic" as used in the Act. Laborer generally means one who performs manual labor or who labors at an occupation requiring physical strength; mechanic generally means a worker skilled with tools. See 18 Comp. Gen. 341.

(k)Employer means contractor or subcontractor within the meaning of the Act and of this part.

(l)Hazardous substance means a substance which, by reason of being explosive, flammable, poisonous, corrosive, oxidizing, irritating, or otherwise harmful, is likely to cause death or injury.

(m)Qualified means one who, by possession of a recognized degree, certificate, or professional standing, or who by extensive knowledge, training, and experience, has successfully demonstrated his ability to solve or resolve problems relating to the subject matter, the work, or the project.

(n)Safety factor means the ratio of the ultimate breaking strength of a member or piece of material or equipment to the actual working stress or safe load when in use.

(o)Secretary means the Secretary of Labor.

(p)SAE means Society of Automotive Engineers.

(q)Shall means mandatory.

(r)Should means recommended.

(s)Suitable means that which fits, and has the qualities or qualifications to meet a given purpose, occasion, condition, function, or circumstance. \[44 FR 8577, Feb. 9, 1979; 44 FR 20940, Apr. 6, 1979, as amended at 58 FR 35078, June 30, 1993\]

Connections85 cite this

Cited by 85 sections · top 40

CFR

3 references not yet in our index

86 Stat. 96
40 USC 333
40 USC 276a

Citation graph

cites case law

§ 1926.32

Definitions.

Fed. Reg.×80

C.F.R.×5

Stat.86 Stat. 96

Cite40 USC 333

Cite40 USC 276a

Cites 3Cited by 85 across 2 sources