§ 1926.1201. Scope.
224 words·~1 min read·
/us/cfr/t29/s§ 1926.1201·A research copy — for the controlling text, always check the official state or federal source. Not legal advice.
(a)This standard sets forth requirements for practices and procedures to protect employees engaged in construction activities at a worksite with one or more confined spaces, subject to the exceptions in paragraph
(b)of this section. Note to paragraph (a). Examples of locations where confined spaces may occur include, but are not limited to, the following: Bins; boilers; pits (such as elevator, escalator, pump, valve or other equipment); manholes (such as sewer, storm drain, electrical, communication, or other utility); tanks (such as fuel, chemical, water, or other liquid, solid or gas); incinerators; scrubbers; concrete pier columns; sewers; transformer vaults; heating, ventilation, and air-conditioning
(HVAC)ducts; storm drains; water mains; precast concrete and other pre-formed manhole units; drilled shafts; enclosed beams; vessels; digesters; lift stations; cesspools; silos; air receivers; sludge gates; air preheaters; step up transformers; turbines; chillers; bag houses; and/or mixers/reactors.
(b)Exceptions. This standard does not apply to:
(1)Construction work regulated by subpart P of this part (Excavations).
(2)Construction work regulated by subpart S of this part (Underground Construction, Caissons, Cofferdams and Compressed Air).
(3)Construction work regulated by subpart Y of this part (Diving).
(c)Where this standard applies and there is a provision that addresses a confined space hazard in another applicable OSHA standard, the employer must comply with both that requirement and the applicable provisions of this standard.
Connections1 cite this
Cited by 1 section
register
Citation graph
cites case law
§ 1926.1201
Scope.
Fed. Reg.×1
Cites 0Cited by 1 across 1 source