§ 1915.181. Electrical circuits and distribution boards.
199 words·~1 min read·
/us/cfr/t29/s§ 1915.181·A research copy — for the controlling text, always check the official state or federal source. Not legal advice.
(a)The provisions of this section shall apply to ship repairing and shipbuilding and shall not apply to shipbreaking.
(b)Before an employee is permitted to work on an electrical circuit, except when the circuit must remain energized for testing and adjusting, the circuit shall be deenergized and checked at the point at which the work is to be done to insure that it is actually deenergized. When testing or adjusting an energized circuit a rubber mat, duck board, or other suitable insulation shall be used underfoot where an insulated deck does not exist.
(c)De-energizing the circuit shall be accomplished by opening the circuit breaker, opening the switch, or removing the fuse, whichever method is appropriate. The circuit breaker, switch, or fuse location shall then be locked out or tagged in accordance with § 1915.89.
(d)When work is performed immediately adjacent to an open-front energized board or in back of an energized board, the board shall be covered or some other equally safe means shall be used to prevent contact with any of the energized parts. \[47 FR 16986, Apr. 20, 1982, as amended at 67 FR 44545, July 3, 2002; 76 FR 24711, May 2, 2011\]
Connections3 cite this
Cited by 3 sections
Citation graph
cites case law
§ 1915.181
Electrical circuits and distribution boards.
Fed. Reg.×2
C.F.R.×1
Cites 0Cited by 3 across 2 sources