§ 1910.161. Fixed extinguishing systems, dry chemical.
210 words·~1 min read·
/us/cfr/t29/s§ 1910.161·A research copy — for the controlling text, always check the official state or federal source. Not legal advice.
(a)Scope and application. This section applies to all fixed extinguishing systems, using dry chemical as the extinguishing agent, installed to meet a particular OSHA standard. These systems shall also comply with § 1910.160.
(b)Specific requirements.
(1)The employer shall assure that dry chemical agents are compatible with any foams or wetting agents with which they are used.
(2)The employer may not mix together dry chemical extinguishing agents of different compositions. The employer shall assure that dry chemical systems are refilled with the chemical stated on the approval nameplate or an equivalent compatible material.
(3)When dry chemical discharge may obscure vision, the employer shall provide a pre-discharge employee alarm which complies with § 1910.165 and which will give employees time to safely exit from the discharge area prior to system discharge.
(4)The employer shall sample the dry chemical supply of all but stored pressure systems at least annually to assure that the dry chemical supply is free of moisture which may cause the supply to cake or form lumps.
(5)The employer shall assure that the rate of application of dry chemicals is such that the designed concentration of the system will be reached within 30 seconds of initial discharge. \[45 FR 60712, Sept. 12, 1980\]