§ 3280.407. Quality control testing, manuals, facilities, and personnel.
193 words·~1 min read·
/us/cfr/t24/s§ 3280.407·A research copy — for the controlling text, always check the official state or federal source. Not legal advice.
(a)Definitions. For purposes of this section, the definitions found in 40 CFR 770.3 apply.
(b)Quality control testing. Quality control testing is required for hardwood plywood made with a veneer core or composite core, medium density fiberboard, thin medium density fiberboard, and particleboard and must be performed in accordance with the general requirements in 40 CFR 770.20(a) and by one of the test methods and at the frequency specified in 40 CFR 770.20(b). Panels being tested with an equivalence and correlation must be determined in accordance with 40 CFR 770.20(d).
(c)Quality control manuals, facilities, and personnel. A panel producer must have a written quality control manual, must designate a quality control facility for conducting quality control formaldehyde testing under this section, and must designate a person as quality control manager with adequate experience and/or training to be responsible for formaldehyde emissions quality control consistent with 40 CFR 770.21. A panel producer means a manufacturing plant or other facility that manufactures (excluding facilities that solely import products) composite wood products (hardwood plywood made with a veneer or composite core, medium-density fiberboard, and particleboard) on the premises. \[85 FR 5566, Jan. 31, 2020\]
Connections5 off-index
5 references not yet in our index
- 40 CFR 770.3
- 40 CFR 770.20(a)
- 40 CFR 770.20(b)
- 40 CFR 770.20(d)
- 40 CFR 770.21
Citation graph
cites case law
§ 3280.407
Quality control testing, manuals, facilities, and personnel.
Cite40 CFR 770.3
Cite40 CFR 770.20(a)
Cite40 CFR 770.20(b)
Cite40 CFR 770.20(d)
Cite40 CFR 770.21
Cites 5Cited by 0 across 0 sources