§ 73.1162. Bismuth oxychloride.
260 words·~1 min read·
/us/cfr/t21/s§ 73.1162·A research copy — for the controlling text, always check the official state or federal source. Not legal advice.
(a)Identity.
(1)The color additive bismuth oxychloride is a synthetically prepared white or nearly white amorphous or finely crystalline, odorless powder consisting principally of BiOCl.
(2)Color additive mixtures for drug use made with bismuth oxychloride may contain only those diluents that are suitable and that are listed in this subpart as safe in color additive mixtures for coloring externally applied drugs.
(b)Specifications. The color additive bismuth oxychloride shall conform to the following specifications and shall be free from impurities other than those named to the extent that such other impurities may be avoided by good manufacturing practice: Volatile matter, not more than 0.5 percent. Lead (as Pb), not more than 20 parts per million. Arsenic (as As), not more than 3 parts per million. Mercury (as Hg), not more than 1 part per million. Bismuth oxychloride, not less than 98 percent.
(c)Uses and restrictions. The color additive bismuth oxychloride may be safely used in coloring externally applied drugs, including those intended for use in the area of the eye, in amounts consistent with good manufacturing practice.
(d)Labeling. The color additive and any mixture prepared therefrom intended solely or in part for coloring purposes shall bear, in addition to any information required by law, labeling in accordance with the provisions of § 70.25 of this chapter.
(e)Exemption from certification. Certification of this color additive is not necessary for the protection of the public health, and therefore batches thereof are exempt from certification pursuant to section 721(c) of the act. [42 FR 52394, Sept. 30, 1977]