§ 1204.5. Manufacturer's instructions.
154 words·~1 min read·
/us/cfr/t16/s§ 1204.5·A research copy — for the controlling text, always check the official state or federal source. Not legal advice.
(a)For all antennas covered under this part 1204, the following statement shall be included in the manufacturer's instructions, in addition to the material required by 16 CFR 1402.4(a)(1)(ii): Under some conditions, this antenna may not prevent electrocution. Users should keep antenna away from any overhead wires. If antenna contacts a power line, any initial protection could fail at any time. IF ANTENNA NEARS ANY OVERHEAD WIRES, IMMEDIATELY LET GO, STAY AWAY, AND CALL UTILITY COMPANY.
(b)This warning statement shall be in a separate paragraph immediately following the warning statement required by 16 CFR 1402.4(a)(1)(ii)(A).
(c)This warning statement shall be legible and conspicuous and shall be in type that is at least as large as the largest type used on the remainder of the page, with the exception of the logo and any identification of the manufacturer, brand, model, or similar designations, and that is preferably no smaller than 10 point type.
Connectionstraces to 1
Traces to 1 document
Citation graph
cites case law
§ 1204.5
Manufacturer's instructions.
Cites 1Cited by 0 across 0 sources