§ 60.13. FSTD objective data requirements.
351 words·~2 min read·
/us/cfr/t14/s§ 60.13·A research copy — for the controlling text, always check the official state or federal source. Not legal advice.
(a)Except as provided in paragraph
(b)and
(c)of this section, for the purposes of validating FSTD performance and handling qualities during evaluation for qualification, the data made available to the responsible Flight Standards office (the validation data package) must include the aircraft manufacturer's flight test data and all relevant data developed after the type certificate was issued (e.g., data developed in response to an airworthiness directive) if such data results from a change in performance, handling qualities, functions, or other characteristics of the aircraft that must be considered for flight crewmember training, evaluation, or for meeting experience requirements of this chapter.
(b)The validation data package may contain flight test data from a source in addition to or independent of the aircraft manufacturer's data in support of an FSTD qualification, but only if this data is gathered and developed by that source in accordance with flight test methods, including a flight test plan, as described in the applicable QPS.
(c)The validation data package may also contain predicted data, engineering simulation data, data from pilot owner or pilot operating manuals, or data from public domain sources, provided this data is acceptable to the responsible Flight Standards office. If found acceptable the data may then be used in particular applications for FSTD qualification.
(d)Data or other material or elements must be submitted in a form and manner acceptable to the responsible Flight Standards office.
(e)The responsible Flight Standards office may require additional objective data, which may include flight testing if necessary, if the validation data package does not support FSTD qualification requirements as described in this part and the applicable QPS appendix.
(f)When an FSTD sponsor learns, or is advised by an aircraft manufacturer or other data provider, that an addition to, an amendment to, or a revision of data that may relate to FSTD performance or handling characteristics is available, the sponsor must notify the responsible Flight Standards office as described in the applicable QPS. [Docket FAA-2002-12461, 71 FR 63426, Oct. 30, 2006, as amended by Docket FAA-2022-1355, Amdt. 60-7, 87 FR 75711, Dec. 9, 2022]