§ 29.549. Fuselage and rotor pylon structures.

192 words·~1 min read·/us/cfr/t14/s§ 29.549·

A research copy — for the controlling text, always check the official state or federal source. Not legal advice.

(a)Each fuselage and rotor pylon structure must be designed to withstand—

(1)The critical loads prescribed in §§ 29.337 through 29.341, and 29.351;

(2)The applicable ground loads prescribed in §§ 29.235, 29.471 through 29.485, 29.493, 29.497, 29.505, and 29.521; and

(3)The loads prescribed in § 29.547 (d)(1) and (e)(1)(i).

(b)Auxiliary rotor thrust, the torque reaction of each rotor drive system, and the balancing air and inertia loads occurring under accelerated flight conditions, must be considered.

(c)Each engine mount and adjacent fuselage structure must be designed to withstand the loads occurring under accelerated flight and landing conditions, including engine torque.

(d)[Reserved]

(e)If approval for the use of 2 1/2-minute OEI power is requested, each engine mount and adjacent structure must be designed to withstand the loads resulting from a limit torque equal to 1.25 times the mean torque for 2 1/2-minute OEI power combined with 1g flight loads. (Secs. 604, 605, 72 Stat. 778, 49 U.S.C. 1424, 1425) [Doc. No. 5084, 29 FR 16150, Dec. 3, 1964, as amended by Amdt. 29-4, 33 FR 14106, Sept. 18, 1968; Amdt. 29-26, 53 FR 34215, Sept. 2, 1988]

Connections2 off-index

2 references not yet in our index

72 Stat. 778
49 USC 1424

Citation graph

cites case law

§ 29.549

Fuselage and rotor pylon structures.

Stat.72 Stat. 778

Cite49 USC 1424

Cites 2Cited by 0 across 0 sources