§ 27.1547. Magnetic direction indicator.
170 words·~1 min read·
/us/cfr/t14/s§ 27.1547·A research copy — for the controlling text, always check the official state or federal source. Not legal advice.
(a)A placard meeting the requirements of this section must be installed on or near the magnetic direction indicator.
(b)The placard must show the calibration of the instrument in level flight with the engines operating.
(c)The placard must state whether the calibration was made with radio receivers on or off.
(d)Each calibration reading must be in terms of magnetic heading in not more than 45 degree increments.
(e)If a magnetic nonstabilized direction indicator can have a deviation of more than 10 degrees caused by the operation of electrical equipment, the placard must state which electrical loads, or combination of loads, would cause a deviation of more than 10 degrees when turned on. (Secs. 313(a), 601, 603, 604, and 605 of the Federal Aviation Act of 1958 (49 U.S.C. 1354(a), 1421, 1423, 1424, and 1425); and sec. 6(c) of the Dept. of Transportation Act (49 U.S.C. 1655(c))) [Doc. No. 5074, 29 FR 15695, Nov. 24, 1964, as amended by Amdt. 27-13, 42 FR 36972, July 18, 1977]
Connections2 off-index
2 references not yet in our index
- 49 USC 1354(a)
- 49 USC 1655(c)
Citation graph
cites case law
§ 27.1547
Magnetic direction indicator.
Cite49 USC 1354(a)
Cite49 USC 1655(c)
Cites 2Cited by 0 across 0 sources