§ 25.1317. High-intensity Radiated Fields (HIRF) Protection.
381 words·~2 min read·
/us/cfr/t14/s§ 25.1317·A research copy — for the controlling text, always check the official state or federal source. Not legal advice.
(a)Except as provided in paragraph
(d)of this section, each electrical and electronic system that performs a function whose failure would prevent the continued safe flight and landing of the airplane must be designed and installed so that—
(1)The function is not adversely affected during and after the time the airplane is exposed to HIRF environment I, as described in appendix L to this part;
(2)The system automatically recovers normal operation of that function, in a timely manner, after the airplane is exposed to HIRF environment I, as described in appendix L to this part, unless the system's recovery conflicts with other operational or functional requirements of the system; and
(3)The system is not adversely affected during and after the time the airplane is exposed to HIRF environment II, as described in appendix L to this part.
(b)Each electrical and electronic system that performs a function whose failure would significantly reduce the capability of the airplane or the ability of the flightcrew to respond to an adverse operating condition must be designed and installed so the system is not adversely affected when the equipment providing these functions is exposed to equipment HIRF test level 1 or 2, as described in appendix L to this part.
(c)Each electrical and electronic system that performs a function whose failure would reduce the capability of the airplane or the ability of the flightcrew to respond to an adverse operating condition must be designed and installed so the system is not adversely affected when the equipment providing the function is exposed to equipment HIRF test level 3, as described in appendix L to this part.
(d)Before December 1, 2012, an electrical or electronic system that performs a function whose failure would prevent the continued safe flight and landing of an airplane may be designed and installed without meeting the provisions of paragraph
(a)provided—
(1)The system has previously been shown to comply with special conditions for HIRF, prescribed under § 21.16, issued before December 1, 2007;
(2)The HIRF immunity characteristics of the system have not changed since compliance with the special conditions was demonstrated; and
(3)The data used to demonstrate compliance with the special conditions is provided. [Doc. No. FAA-2006-23657, 72 FR 44025, Aug. 6, 2007]
Connections4 cite this
Citation graph
cites case law
§ 25.1317
High-intensity Radiated Fields (HIRF) Protection.
Fed. Reg.×4
Cites 0Cited by 4 across 1 source