§ 23.2240. Structural durability.
208 words·~1 min read·
/us/cfr/t14/s§ 23.2240·A research copy — for the controlling text, always check the official state or federal source. Not legal advice.
(a)The applicant must develop and implement inspections or other procedures to prevent structural failures due to foreseeable causes of strength degradation, which could result in serious or fatal injuries, or extended periods of operation with reduced safety margins. Each of the inspections or other procedures developed under this section must be included in the Airworthiness Limitations Section of the Instructions for Continued Airworthiness required by § 23.1529.
(b)For Level 4 airplanes, the procedures developed for compliance with paragraph
(a)of this section must be capable of detecting structural damage before the damage could result in structural failure.
(c)For pressurized airplanes:
(1)The airplane must be capable of continued safe flight and landing following a sudden release of cabin pressure, including sudden releases caused by door and window failures.
(2)For airplanes with maximum operating altitude greater than 41,000 feet, the procedures developed for compliance with paragraph
(a)of this section must be capable of detecting damage to the pressurized cabin structure before the damage could result in rapid decompression that would result in serious or fatal injuries.
(d)The airplane must be designed to minimize hazards to the airplane due to structural damage caused by high-energy fragments from an uncontained engine or rotating machinery failure.