§ 21.31. Type design.

240 words·~1 min read·/us/cfr/t14/s§ 21.31·

A research copy — for the controlling text, always check the official state or federal source. Not legal advice.

The type design consists of—

(a)The drawings and specifications, and a listing of those drawings and specifications, necessary to define the configuration and the design features of the product shown to comply with the requirements of that part of this subchapter applicable to the product;

(b)Information on dimensions, materials, and processes necessary to define the structural strength of the product;

(c)The Airworthiness Limitations section of the Instructions for Continued Airworthiness as required by parts 23, 25, 26, 27, 29, 31, 33 and 35 of this subchapter, or as otherwise required by the FAA; and as specified in the applicable airworthiness criteria for special classes of aircraft defined in § 21.17(b); and

(d)For primary category aircraft, if desired, a special inspection and preventive maintenance program designed to be accomplished by an appropriately rated and trained pilot-owner.

(e)Any other data necessary to allow, by comparison, the determination of the airworthiness, noise characteristics, fuel efficiency, fuel venting, and exhaust emissions (where applicable) of later products of the same type. [Doc. No. 5085, 29 FR 14564, Oct. 24, 1964, as amended by Amdt. 21-27, 34 FR 18363, Nov. 18, 1969; Amdt. 21-51, 45 FR 60170, Sept. 11, 1980; Amdt. 21-60, 52 FR 8042, Mar. 13, 1987; Amdt. 21-68, 55 FR 32860, Aug. 10, 1990; Amdt. 21-70, 57 FR 41368, Sept. 9, 1992; Amdt. 21-90, 72 FR 63404, Nov. 8, 2007; Amdt. No. 21-107, 89 FR 12653, Feb. 16, 2024]

Connections38 cite this

Cited by 38 sections

Citation graph

cites case law

§ 21.31

Type design.

Fed. Reg.×38

Cites 0Cited by 38 across 1 source