§ 830.202. Safety basis.
227 words·~1 min read·
/us/cfr/t10/s§ 830.202·A research copy — for the controlling text, always check the official state or federal source. Not legal advice.
(a)The contractor responsible for a Hazard Category 1, 2, or 3 DOE nuclear facility must establish and maintain the safety basis for the facility.
(b)In establishing the safety basis for a Hazard Category 1, 2, or 3 DOE nuclear facility, the contractor responsible for the facility must:
(1)Define the scope of the work to be performed;
(2)Identify and analyze the hazards associated with the work;
(3)Categorize the facility consistent with DOE-STD-1027-92 (“Hazard Categorization and Accident Analysis Techniques for compliance with DOE Order 5480.23, Nuclear Safety Analysis Reports,” Change Notice 1, September 1997);
(4)Prepare a documented safety analysis for the facility; and
(5)Establish the hazard controls upon which the contractor will rely to ensure adequate protection of workers, the public, and the environment.
(c)In maintaining the safety basis for a Hazard Category 1, 2, or 3 DOE nuclear facility, the contractor responsible for the facility must:
(1)Update the safety basis to keep it current and to reflect changes in the facility, the work and the hazards as they are analyzed in the documented safety analysis;
(2)Annually provide DOE the current documented safety analysis or a letter stating that there have been no changes in the documented safety analysis since the prior submittal; and
(3)Incorporate in the safety basis any changes, conditions, or hazard controls directed by DOE.
Connections9 cite this
Cited by 9 sections · top 4
Citation graph
cites case law
§ 830.202
Safety basis.
Fed. Reg.×9
Cites 0Cited by 9 across 1 source