§ 460.202. Thermostats and controls.
171 words·~1 min read·
/us/cfr/t10/s§ 460.202·A research copy — for the controlling text, always check the official state or federal source. Not legal advice.
(a)At least one thermostat must be provided for each separate heating and cooling system installed by the manufacturer. The thermostat and controls requirements are adapted from section R403 of the 2021 IECC.
(b)Any programmable thermostat installed by the manufacturer that controls the heating or cooling system must—
(1)Be capable of controlling the heating and cooling system on a daily schedule to maintain different temperature set points at different times of the day and different days of the week;
(2)Include the capability to set back or temporarily operate the system to maintain zone temperatures down to 55 °F (13 °C) or up to 85 °F (29 °C); and
(3)Initially be programmed with a heating temperature set point no higher than 70 °F (21 °C) and a cooling temperature set point no lower than 78 °F (26 °C).
(c)Heat pumps with supplementary electric-resistance heat must be provided with controls that, except during defrost, prevent supplemental heat operation when the heat pump compressor can meet the heating load.