Notices. Notice; correction
894 words·~4 min read·
/register/2025/03/31/2025-05418·A research copy — for the controlling text, always check the official state or federal source. Not legal advice.
BILLING CODE 3510-DS-P DEPARTMENT OF COMMERCE International Trade Administration [C-552-846] Thermoformed Molded Fiber Products From the Socialist Republic of Vietnam: Preliminary Affirmative Countervailing Duty Determination, Preliminary Affirmative Critical Circumstances Determination, and Alignment of Final Determination With Final Antidumping Duty Determination; Correction AGENCY: Enforcement and Compliance, International Trade Administration, Department of Commerce. ACTION:
Notice; correction. SUMMARY: The U.S. Department of Commerce (Commerce) published a notice in the **Federal Register** of March 14, 2025, in which Commerce issued its preliminary determination in the countervailing duty
(CVD)investigation of thermoformed molded fiber products (molded fiber products) from the Socialist Republic of Vietnam (Vietnam). This notice corrects Appendix I, also attached herein. FOR FURTHER INFORMATION CONTACT: Thomas Martin, AD/CVD Operations, Office IV, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone:
(202)482-3936. SUPPLEMENTARY INFORMATION: Background On March 14, 2025, Commerce published in the **Federal Register** its preliminary determination in the CVD investigation of molded fiber products from Vietnam. 1 We provided an incorrect version of the scope of the investigation in Appendix I. The complete corrected scope of the investigation is attached to this notice as Appendix I. 1 *See Thermoformed Molded Fiber Products from the Socialist Republic of Vietnam: Preliminary Affirmative Countervailing Duty Determination, Preliminary Affirmative Critical Circumstances Determination, and Alignment of Final Determination with Final Antidumping Duty Determination,* 90 FR 12126 (March 14, 2025). Correction In the **Federal Register** of March 14, 2025, in FR Doc 2025-04094 on page 12128, in the third column, and on page 12129 in the first column, replace Appendix I with the corrected Appendix I attached to this notice. Notification to Interested Parties This notice is issued and published in accordance with sections 702 and 777(i) of the Tariff Act of 1930, as amended, and 19 CFR 351.203(c). Dated: March 24, 2025. Christopher Abbott, Deputy Assistant Secretary for Policy and Negotiations, performing the non-exclusive functions and duties of the Assistant Secretary for Enforcement and Compliance. Appendix I—Scope of the Investigation The merchandise subject to this investigation consists of thermoformed molded fiber products regardless of shape, form, function, fiber source, or finish. Thermoformed molded fiber products are formed with cellulose fibers, thermoformed using one or more heated molds, and dried/cured in the mold. Thermoformed molded fiber products include, but are not limited to, plates, bowls, clamshells, trays, lids, food or foodservice contact packaging, and consumer or other product packaging. Thermoformed molded fiber products are relatively dense, with a typical fiber density above 0.5 grams per cubic centimeter, and are generally characterized by relatively smooth surfaces. They may be derived from any virgin or recycled cellulose fiber source (including, but not limited to, those sourced from wood, woody crops, agricultural crops/byproducts/residue, and agricultural/industrial/other waste). They may have any weight, shape, dimensionality, design, or size, and may be bleached, unbleached, dyed, colored, or printed. They may include ingredients, additives, or chemistries to enhance functionality including, but not limited to, anti-microbial, anti-fungal, anti-bacterial, heat/flame resistant, hydrophobic, oleophobic, absorbent, or adsorbent. Thermoformed molded fiber products may also be subject to other processing or treatments, including, but not limited to, hot or after pressing, die-cutting, punching, trimming, padding, perforating, printing, labeling, dying, coloring, coating, laminating, embossing, debossing, repacking, or denesting. Thermoformed molded fiber products subject to this investigation may also have additional design features, including, but not limited to, tab closures, venting, channeling, or stiffening. Thermoformed molded fiber products remain covered by the scope of this investigation whether the subject product is encased by exterior packaging or whether the subject product forms the outer packaging for non-subject products. They also remain covered by the scope of this investigation whether imported alone, or in any combination of subject and non-subject merchandise ( *e.g.,* a lid or cover of any type packaged with a molded fiber bowl, addition of any items to make the thermoformed molded fiber packaging suitable for end-use such as absorbent pads). When thermoformed molded fiber products are imported in combination with non-subject merchandise, only the thermoformed molded fiber products are subject merchandise. Excluded from the scope of this investigation are thermoformed molded fiber products imported as packaging material that enclose and/or surround non-subject merchandise prepackaged for final sale upon importation into the United States ( *e.g.,* molded fiber packaging surrounding a cellular phone). Thermoformed molded fiber products include thermoformed molded fiber products matching the above description that have been finished, packaged, or otherwise processed in a third country by performing finishing, packaging, or processing that would not otherwise remove the merchandise from the scope of the investigations if performed in the country of manufacture of the thermoformed molded fiber products. Examples of finishing, packaging, or other processing in a third country that would not otherwise remove the merchandise from the scope of the investigations if performed in the country of manufacture of the thermoformed molded fiber products include, but are not limited to, hot or after pressing, die-cutting, punching, trimming, padding, perforating, printing, labeling, dying, coloring, coating, laminating, embossing, debossing, repacking, or denesting. Thermoformed molded fiber products are classified under subheadings 4823.70.0020 and 4823.70.0040, Harmonized Tariff Schedule of the United States (HTSUS). Imports may also be classified under subheadings 4823.61.0020, 4823.61.0040, 4823.69.0020, 4823.69.0040, 4823.90.1000, HTSUS. References to the HTSUS classification are provided for convenience and customs purposes, and the written description of the merchandise under investigation is dispositive. [FR Doc. 2025-05418 Filed 3-28-25; 8:45 am]
Connectionstraces to 1
Traces to 1 document
Citation graph
cites case law
Notices
Notice; correction
Cites 1Cited by 0 across 0 sources