Notices. Enforcement and Compliance, International Trade Administration, Department of Commerce
1,076 words·~5 min read·
/register/2022/02/24/2022-03894·A research copy — for the controlling text, always check the official state or federal source. Not legal advice.
BILLING CODE 3510-DS-P DEPARTMENT OF COMMERCE International Trade Administration [A-588-843, A-580-829, A-583-828] Stainless Steel Wire Rod From Japan, the Republic of Korea, and Taiwan: Continuation of the Antidumping Duty Orders AGENCY: Enforcement and Compliance, International Trade Administration, Department of Commerce. SUMMARY: As a result of the determinations by the Department of Commerce (Commerce) and the U.S. International Trade Commission
(ITC)that revocation of the antidumping duty
(AD)orders on stainless steel wire rod
(SSWR)from Japan, the Republic of Korea (Korea), and Taiwan would likely lead to a continuation or recurrence of dumping and material injury to an industry in the United States, Commerce is publishing a notice of continuation of these AD orders. DATES: Applicable February 24, 2022. FOR FURTHER INFORMATION CONTACT: Christopher Williams or Minoo Hatten, AD/CVD Operations, Office I, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone:
(202)482-5166 or
(202)482-1690, respectively. SUPPLEMENTARY INFORMATION: Background On September 15, 1998, Commerce published in the **Federal Register** the AD orders on SSWR from Japan, Korea, and Taiwan. 1 On July 1, 2021, Commerce initiated, 2 and the ITC instituted, 3 sunset reviews of the *Orders,* pursuant to section 751(c) of the Tariff Act of 1930, as amended (the Act). 1 *See Notice of Amendment of Final Determination of Sales at Less Than Fair Value and Antidumping Duty Order: Stainless Steel Wire Rod from Korea,* 63 FR 49331 (September 15, 1998); *see also Notice of Antidumping Duty Order: Stainless Steel Wire Rod from Japan,* 63 FR 49328 (September 15, 1998); and *Notice of Amendment of Final Determination of Sales at Less Than Fair Value and Antidumping Duty Order: Stainless Steel Wire Rod from Taiwan,* 63 FR 49332 (September 15, 1998) (collectively, *Orders* ). 2 *See Initiation of Five-Year (Sunset) Reviews,* 86 FR 35070 (July 1, 2021). 3 *See Stainless Steel Wire Rod from Japan, Korea, and Taiwan; Institution of a Five-Year Review,* 86 FR 35124 (July 1, 2021). As a result of its reviews, Commerce determined, pursuant to sections 751(c)(1) and 752(c) of the Act, that revocation of the *Orders* would likely lead to continuation or recurrence of dumping. Commerce, therefore, notified the ITC of the magnitude of the margins of dumping rates likely to prevail should these *Orders* be revoked. 4 4 *See Stainless Steel Wire Rod from Japan, the Republic of Korea, and Taiwan: Final Results of the Expedited Sunset Reviews of the Antidumping Duty Orders,* 86 FR 56249 (October 8, 2021), and accompanying Issues and Decision Memorandum (IDM). On February 16, 2022, the ITC published its determination that revocation of the *Orders* would likely lead to a continuation or recurrence of material injury to an industry in the United States within a reasonably foreseeable time, pursuant to sections 751(c) and 752(a) of the Act. 5 5 *See Stainless Steel Wire Rod from Japan, South Korea, and Taiwan; Determinations, Inv. Nos. 731-TA-771-772 and 775 (Fourth Review),* 87 FR 8878 (February 16, 2022), *see also* USITC Pub. 5279 (February 2022). Scope of the Orders The merchandise covered by the *Orders* is SSWR, which comprises products that are hot-rolled or hot-rolled annealed and/or pickled and/or descaled rounds, squares, octagons, hexagons or other shapes, in coils, that may also be coated with a lubricant containing copper, lime or oxalate. SSWR is made of alloy steels containing, by weight, 1.2 percent or less of carbon and 10.5 percent or more of chromium, with or without other elements. These products are manufactured only by hot-rolling or hot rolling annealing, and/or pickling and/or descaling, are normally sold in coiled form, and are of solid cross-section. The majority of SSWR sold in the United States is round in cross-sectional shape, annealed and pickled, and later cold finished into stainless steel wire or small-diameter bar. The most common size for such products is 5.5 millimeters or 0.217 inches in diameter, which represents the smallest size that normally is produced on a rolling mill and is the size that most wire-drawing machines are set up to draw. The range of SSWR sizes normally sold in the United States is between 0.20 inches and 1.312 inches in diameter. Two stainless steel grades are excluded from the scope of the *Orders.* SF20T and K-M35FL are excluded. The chemical makeup for the excluded grades is as follows: SF20T Carbon 0.05 max Manganese 2.00 max Phosphorous 0.05 max Sulfur 0.15 max Silicon 1.00 max Chromium 19.00/21.00 Molybdenum 1.50/2.50 Lead-added (0.10/0.30) Tellurium-added (0.03 min) K-M35FL Carbon 0.015 max Silicon 0.70/1.00 Manganese 0.40 max Nickel 0.30 max Chromium 12.50/14.00 Lead 0.10/0.30 Phosphorous 0.04 max Sulfur 0.03 max Aluminum 0.20/0.35 The products subject to the *Orders* are currently classifiable under subheadings 7221.00.0005, 7221.00.0015, 7221.00.0030, 7221.00.0045, and 7221.00.0075 of the Harmonized Tariff Schedule of the United States (HTSUS). Although the HTSUS subheadings are provided for convenience and customs purposes, the written description of the scope of the *Orders* is dispositive. Continuation of the Orders As a result of the determinations by Commerce and the ITC that revocation of the *Orders* would likely lead to a continuation or recurrence of dumping and material injury to an industry in the United States, pursuant to section 751(d)(2) of the Act and 19 CFR 351.218(a), Commerce hereby orders the continuation of the *Orders.* U.S. Customs and Border Protection will continue to collect AD cash deposits at the rates in effect at the time of entry for all imports of subject merchandise. The effective date of the continuation of the *Orders* will be the date of publication in the **Federal Register** of this notice of continuation. Pursuant to section 751(c)(2) of the Act and 19 CFR 351.218(c)(2), Commerce intends to initiate the next five-year (sunset) reviews of the *Orders* not later than 30 days prior to the fifth anniversary of the effective date of continuation. Administrative Protective Order
(APO)This notice also serves as the only reminder to parties subject to APO of their responsibility concerning the return, destruction, or conversion to judicial protective order of proprietary information disclosed under APO in accordance with 19 CFR 351.305(a)(3). Failure to comply is a violation of the APO which may be subject to sanctions. Notification to Interested Parties These five-year sunset reviews and this notice are in accordance with section 751(c) of the Act and published pursuant to section 777(i)(1) of the Act and 19 CFR 351.218(f)(4). Dated: February 17, 2022. Lisa W. Wang, Assistant Secretary for Enforcement and Compliance. [FR Doc. 2022-03894 Filed 2-23-22; 8:45 am]
Connectionstraces to 2
Citation graph
cites case law
Notices
Enforcement and Compliance, International Trade Administration, Department of Commerce
Cites 2Cited by 0 across 0 sources