Rules and Regulations. Notice of Significant Enforcement Policy Change; Rescission of Interim Fall Protection Compliance Directive for Residential Construction

Agency: Occupational Safety and Health Administration (OSHA), Labor
Action: Notice of Significant Enforcement Policy Change; Rescission of Interim Fall Protection Compliance Directive for Residential Construction
Citation: FR Doc. 2010-32154 · 29 CFR 1926

Summary

The Occupational Safety and Health Administration (OSHA) is issuing compliance directive STD 03-11-002 Fall Protection in Residential Construction. This directive rescinds compliance directive STD 03-00-001, Plain Language Revision of OSHA Instruction STD 3.1, Interim Fall Protection Compliance Guidelines for Residential Construction, effective on June 18, 1999. There continue to be high numbers of fall-related fatalities in residential construction. The Advisory Committee on Construction Safety and Health, the National Association of Home Builders, and the Occupational Safety and Health State Plan Association have recommended the withdrawal of directive STD 03-00-001.

Dates

Effective date: June 16, 2011.

Supplementary Information

Background. Under 29 CFR 1926.501(b)(13), workers engaged in residential construction six (6) feet or more above lower levels generally must be protected by conventional fall protection ( i.e., guardrail systems, safety net systems, or personal fall arrest systems). However, if an employer can demonstrate that such fall protection is infeasible or presents a greater hazard, it may implement a written fall protection plan meeting the requirements of § 1926.502(k). After OSHA promulgated § 1926.501(b)(13) in 1994, representatives of the residential construction industry argued that they needed more compliance flexibility than the standard allowed. As a result, OSHA issued Instruction STD 3.1 on December 8, 1995. STD 3.1 set out an interim compliance policy that permitted employers engaged in certain residential construction activities to use specified alternative procedures instead of conventional fall protection. These alternative procedures could be used without a prior showing of infeasibility or greater hazard and without a written, site-specific fall protection plan. On June 18, 1999, the Agency issued STD 3-0.1A (subsequently re-designated STD 03-00-001), which was a plain language replacement for STD 3.1. And shortly after issuing STD 03-00-001, OSHA published an Advanced Notice of Proposed Rulemaking (ANPR). (64 FR 38077, July 14, 1999). The Agency noted that publication of that notice marked the “begin[ning] [of its] * * * evaluation * * * of” STD 03-00-001. In the ANPR, the Agency noted that there had been “advances in the types and capability of commercially available fall protection equipment” since the promulgation of § 1926.501(b)(13) (64 FR at 38080), and stated that it “intend[ed] to rescind * * * [STD 03-00-001] unless persuasive evidence * * * [was] submitted * * * demonstrating that for most residential construction employers complying with * * * [§ 1926.501(b)(13)] is infeasible or presents significant safety hazards.” (64 FR at 38078). Summary of Action. In Directive STD 03-11-002 OSHA rescinds STD 03-00-001. In the new directive, OSHA describes the comments it received in response to the ANPR and concludes that it did not receive “persuasive evidence” showing a continued need for STD 03-00-001. OSHA notes that there continue to be high numbers of fall-related fatalities in residential construction. Directive STD 03-11-002, also describes more recent developments, including recommendations from the Advisory Committee on Construction Safety and Health, the National Association of Home Builders, and the Occupational Safety and Health State Plan Association, that provide independent support for the Agency's decision to rescind STD 03-00-001. Directive STD 03-11-002 sets forth OSHA's interpretation of “residential construction” for purposes of 29 CFR 1926.501(b)(13) and explains that existing compliance guidance referencing STD 03-00-001 will be withdrawn or revised as appropriate. Authority and Signature This document was prepared under the authority of David Michaels, PhD, MPH, Assistant Secretary of Labor for Occupational Safety and Health, U.S. Department of Labor, 200 Constitution Avenue, NW., Washington, DC 20210, pursuant to Sections 4, 6, and 8 of the Occupational Safety and Health Act of 1970 (29 U.S.C. 653, 655, and 657), and Secretary of Labor's Order 4-2010 (75 FR 55355). David Michaels, Assistant Secretary of Labor for Occupational Safety and Health. [FR Doc. 2010-32154 Filed 12-21-10; 8:45 am]