Tap any paragraph to write a margin note. Your notes collect in the Desk below the text and file under cases with @. The side-by-side margin rail opens on a larger screen.

§
Marginalia
Code · REGISTER · 2007-08-03 · DEPARTMENT OF COMMERCE · Notices

Notices. DEPARTMENT OF COMMERCE

17,193 words·~78 min read·/register/2007/08/03/07-3821·

A research copy — for the controlling text, always check the official state or federal source. Not legal advice.

BILLING CODE 3510-05-M DEPARTMENT OF COMMERCE Foreign-Trade Zones Board Docket 30-2007 Foreign-Trade Zone 158 - Vicksburg/Jackson, MS, Request for Manufacturing Authority, Bauhaus USA, Inc., (Upholstered Furniture) An application has been submitted to the Foreign-Trade Zones Board (the Board) by Greater Mississippi Foreign-Trade Zone, Inc., grantee of FTZ 158, pursuant to Section 400.28(a)(2) of the Board's regulations (15 CFR Part 400), requesting authority on behalf of Bauhaus USA, Inc.
(Bauhaus) (a subsidiary of La-Z-Boy, Inc.), to manufacture upholstered furniture and related parts under FTZ procedures within FTZ 158. It was formally filed on July 26, 2007. The Bauhaus facility (216 employees) is located at One Bauhaus Drive within the Turner Industrial Park (Site 16) in Saltillo, Mississippi. The facility is used to produce upholstered furniture (up to 200,000 sofas, chairs, and recliners annually) and cut-and-sewn upholstery covers for the U.S. market and export.
The application proposes that Bauhaus would utilize foreign-origin “micro-denier suede” fabric to be cut and sewn into furniture upholstery covers under FTZ procedures. The finished upholstery covers (HTSUS 9401.90; duty free) would then be assembled into finished chairs, seats, sofas, and recliners manufactured by Bauhaus at its Mississippi facility. The proposed scope of authority under FTZ procedures would only involve duty savings on foreign-origin, micro-denier suede fabrics (classified under HTSUS Headings 5407, 5512, 5515, 5516, 5903, 5906, 6001, 6005, 6006; duty rate range: 2.7 17.2%%) finished with a caustic soda wash process, which the applicant indicates are not produced by U.S. mills.
The application indicates that Bauhaus does not seek FTZ benefits on any of the other foreign fabrics used in production at the facility (i.e., full duties would be paid on all such fabrics). All other material inputs used in production would be domestic-status. FTZ procedures would exempt Bauhaus from customs duty payments on the foreign micro-denier suede fabric used in export production. On micro-denier suede fabric used in production for the U.S. market, the company could elect the finished upholstery cover (i.e., furniture part) duty rate
(free)after the fabric has been cut, sewn, and formed into upholstery covers, at which time they are entered for consumption from the zone. Bauhaus would also have the option to elect the finished furniture duty rate
(free)for the subject fabric when the finished furniture is entered for domestic consumption. The application indicates that the savings from FTZ procedures will help improve the facility's international competitiveness. Public comment is invited from interested parties. Submissions (original and 3 copies) shall be addressed to the Board's Executive Secretary at the following address: Office of the Executive Secretary, Room 2111, U.S. Department of Commerce, 1401 Constitution Avenue, NW, Washington, DC 20230-0002. The closing period for receipt of comments is October 2, 2007. Rebuttal comments in response to material submitted during the foregoing period may be submitted during the subsequent 15-day period to October 17, 2007. A copy of the application will be available for public inspection at each of the following locations: U.S. Department of Commerce Export Assistance Center, Suite 255, 175 East Capitol Street, Jackson, Mississippi 39201; and, at the Office of the Foreign-Trade Zones Board's Executive Secretary at the address listed above. For further information, contact Pierre Duy, examiner, at: pierre_duy@ita.doc.gov, or
(202)482-1378. Dated: July 27, 2007. Andrew McGilvray, Executive Secretary. [FR Doc. E7-15169 Filed 8-2-07; 8:45 am] BILLING CODE 3510-DS-P DEPARTMENT OF COMMERCE Foreign-Trade Zones Board Docket 28-2007 Foreign-Trade Zone 158 - Vicksburg/Jackson, MS, Request for Manufacturing Authority, Lane Furniture Industries, Inc., (Upholstered Furniture) An application has been submitted to the Foreign-Trade Zones Board (the Board) by Greater Mississippi Foreign-Trade Zone, Inc., grantee of FTZ 158, pursuant to Section 400.28(a)(2) of the Board's regulations (15 CFR Part 400), requesting authority on behalf of Lane Furniture Industries, Inc.
(Lane)(a subsidiary of Furniture Brands International, Inc.), to manufacture upholstered furniture and related parts under FTZ procedures within FTZ 158. It was formally filed on July 26, 2007. The Lane facilities (3,300 employees) are located in three sites within FTZ 158: Site 14 - at 3464 McCullough Boulevard within the Burlington Northern Industrial Park, Belden, Mississippi; Site 16 - at 234 Industrial Park Road within the Turner Industrial Park, Saltillo, Mississippi; and, Site 17 - at 5380 Highway 145 South within the Tupelo Lee Industrial Park, Verona, Mississippi. The facilities are used to produce upholstered furniture (up to 1.3 million sofas, chairs, and recliners annually) and cut-and-sewn upholstery covers for the U.S. market and export. The application proposes that Lane utilize foreign-origin “micro-denier suede” fabric to be cut and sewn into furniture upholstery covers under FTZ procedures. The finished upholstery covers (HTSUS 9401.90; duty free) would then be assembled into finished chairs, seats, sofas, and recliners manufactured by Lane at its Mississippi facilities. The proposed scope of authority under FTZ procedures would only involve duty savings on foreign-origin, micro-denier suede fabrics (classified under HTSUS Headings 5407, 5512, 5515, 5516, 5903, 5906, 6001, 6005, 6006; duty rate range: 2.7-17.2%%) finished with a caustic soda wash process, which the applicant indicates are not produced by U.S. mills. The application indicates that Lane does not seek FTZ benefits on any of the other foreign fabrics used in production at the facilities (i.e., full duties would be paid on all such fabrics). All other material inputs used in production would be domestic-status. FTZ procedures would exempt Lane from customs duty payments on the foreign micro-denier suede fabric used in export production. On micro-denier suede fabric used in production for the U.S. market, the company could elect the finished upholstery cover (i.e., furniture part) duty rate
(free)after the fabric has been cut, sewn, and formed into upholstery covers, at which time they are entered for consumption from the zone. Lane would also have the option to elect the finished furniture duty rate
(free)for the subject fabric when the finished furniture is entered for domestic consumption. The application indicates that the savings from FTZ procedures will help improve the facilities' international competitiveness. Public comment is invited from interested parties. Submissions (original and 3 copies) shall be addressed to the Board's Executive Secretary at the following address: Office of the Executive Secretary, Room 2111, U.S. Department of Commerce, 1401 Constitution Avenue, NW, Washington, DC 20230-0002. The closing period for receipt of comments is October 2, 2007. Comments in response to material submitted during the foregoing period may be submitted during the subsequent 15-day period to October 17, 2007. A copy of the application will be available for public inspection at each of the following locations: U.S. Department of Commerce Export Assistance Center, Suite 255, 175 East Capitol Street, Jackson, Mississippi 39201; and, at the Office of the Foreign-Trade Zones Board's Executive Secretary at the address listed above. For further information, contact Pierre Duy, examiner, at: pierre_duy@ita.doc.gov, or
(202)482-1378. Dated: July 27, 2007. Andrew McGilvray, Executive Secretary. [FR Doc. E7-15173 Filed 8-2-07; 8:45 am] BILLING CODE 3510-DS-P DEPARTMENT OF COMMERCE Foreign-Trade Zones Board Docket 31-2007 Foreign-Trade Zone 7-- Mayaguez, Puerto Rico, Request for Manufacturing Authority, Merck Sharpe & Dohme Quimica de Puerto Rico Inc., (Pharmaceutical Manufacturing) An application has been submitted to the Foreign-Trade Zones Board (the Board) by the Puerto Rico Industrial Development Company (PRIDCO), grantee of FTZ 7, requesting authority on behalf of Merck Sharpe & Dohme Quimica de Puerto Rico Inc.
(MSDQ)to conduct pharmaceutical manufacturing operations under FTZ procedures within FTZ 7 at the MOVA Pharmaceutical Corporation
(MOVA)pharmaceutical manufacturing facility in Caguas, Puerto Rico. The application was filed on July 27, 2007. The MOVA facilities (650 employees, 16 acres, buildings totaling 250,000 sq. ft, 40 percent of which is devoted to manufacturing) are located on State Road 1, Km 34.8, within the Villa Blanca Industrial Park in Caguas, Puerto Rico (Site 1, Parcel 2). MSDQ will act as the operator within FTZ 7, with the manufacturing activity being contacted by MOVA on behalf of MSDQ. The company has indicated that the square footage of the buildings devoted to manufacturing operations could grow to include up to 70 percent in the near future. MSDQ has requested authority to manufacture two pharmaceutical products, MK-431A (HTSUS 3004.90) and sitagliptin (HTSUS 2933.59) for the U.S. market and export. Duty rates on the finished products range from duty-free to 6.5 percent. Foreign components that would be used in the manufacturing process (up to 25 percent of total content) include sitagliptin (HTSUS 2933.59), metformin hydrochloride (HTSUS 2925.20), enamine amide (HTSUS 2933.59) and butyl josphos (HTSUS 2931.00), with duty rates of 3.7 to 6.5 percent, *ad valorem* . The application also requests authority to include a broad range of inputs and finished pharmaceutical products that MSDQ may produce under FTZ procedures in the future. (New major activity involving these inputs/products would require review by the FTZ Board.) The duty rates for these inputs and final products range from duty-free to 10 percent. Zone procedures would exempt MSDQ from customs duty payments on the foreign components used in export production to non-NAFTA countries. Exports account for approximately 30 to 40 percent of production. On domestic sales and sales to NAFTA countries, MSDQ could defer duty until the products are entered for consumption or exported, and choose the lower duty that applies to the finished product for the foreign components used in production. The company would also realize certain logistical savings related to zone-to-zone transfers and direct delivery procedures as well as savings on materials that become scrap/waste during manufacturing. The application indicates that FTZ-related savings would help improve MSDQ and MOVA's international competitiveness. Public comment is invited from interested parties. Submissions (original and 3 copies) shall be addressed to the Board's Executive Secretary at the address below. The closing period for their receipt is October 2, 2007. Rebuttal comments in response to material submitted during the foregoing period may be submitted during the subsequent 15-day period (to October 17, 2007). A copy of the application and accompanying exhibits will be available for public inspection at each of the following locations: U.S. Department of Commerce Export Assistance Center, Centro Internacional de Mercadeo, Tower II, Suite 102, Road 165, Guaynabo, Puerto Rico, 00968-8058. Office of the Executive Secretary, Foreign-Trade Zones Board, U.S. Department of Commerce, Room 2111, 1401 Constitution Ave. NW, Washington, DC 20230. For further information, contact Christopher Kemp at *Christopher_kemp@ita.doc.gov* or
(202)482-0862. Dated: July 30, 2007. Andrew McGilvray, Executive Secretary. [FR Doc. E7-15166 Filed 8-2-07; 8:45 am] BILLING CODE 3510-DS-P DEPARTMENT OF COMMERCE International Trade Administration (A-570-827) Certain Cased Pencils: Notice of Rescission of Antidumping Duty Administrative Review AGENCY: Import Administration, International Trade Administration, Department of Commerce. EFFECTIVE DATE: August 3, 2007. FOR FURTHER INFORMATION CONTACT: Charles Riggle, Import Administration, Room 1870, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Ave, NW., Washington, DC 20230; telephone:
(202)482-0650. SUPPLEMENTARY INFORMATION: Background On December 1, 2006, the Department of Commerce (“the Department”) published a notice of opportunity to request an administrative review of the antidumping duty order on certain cased pencils (“cased pencils”) from the People's Republic of China (“PRC”). *See Antidumping or Countervailing Duty Order, Finding, or Suspended Investigation; Opportunity To Request Administrative Review* , 71 FR 69543 (December 1, 2006). We received timely requests for review from China First Pencil Co., Ltd. (“China First”), Shandong Rongxin Import & Export Co., Ltd. (“Rongxin”) and Three Star Stationery Industry Corp. (“Three Star”). On February 2, 2007, the Department published a notice of initiation of the antidumping duty administrative review of cased pencils from the PRC for the period December 1, 2005, through November 30, 2006. *See Initiation of Antidumping and Countervailing Duty Administrative Reviews and Request for Revocation in Part* , 72 FR 5005 (February 2, 2007). On April 9, 2007, China First and Three Star requested a 60-day extension of the deadline by which parties who have requested a review may withdraw the request for review. On April 12, 2007, the Department granted that request. On May 21, 2006, China First and Three Star withdrew their requests for an administrative review. On June 6, 2007, Rongxin withdrew its request for review. Rescission of Review The Department's regulations, at 19 CFR 351.213(d)(1), provide that the Department will rescind an administrative review if the party that requested the review withdraws its request for review within 90 days of the date of publication of the notice of initiation of the requested review, or withdraws its request at a later date if the Department determines that it is reasonable to extend the time limit for withdrawing the request. China First, Three Star and Rongxin were the only parties to request reviews of their respective companies. China First, Three Star and Rongxin made timely requests to withdraw their requests for review. Therefore, since no other party requested a review of these companies, we are rescinding this review of the antidumping duty order on cased pencils from the PRC covering the period December 1, 2005, through November 30, 2006. Assessment The Department will instruct U.S. Customs and Border Protection (“CBP”) to assess antidumping duties on all appropriate entries. For all firms, antidumping duties shall be assessed at rates equal to the cash deposit of estimated antidumping duties required at the time of entry, or withdrawal from warehouse, for consumption, in accordance with 19 CFR 351.212(c)(1)(i). The Department will issue appropriate assessment instructions directly to CBP within 15 days of publication of this notice. This notice is issued and published in accordance with section 777(i)(1) of the Tariff Act of 1930, as amended, and 19 CFR 351.213(d)(4). Dated: July 17, 2007. Stephen J. Claeys Deputy Assistant Secretary for Import Administration. [FR Doc. E7-15137 Filed 8-2-07; 8:45 am] BILLING CODE 3510-DS-S DEPARTMENT OF COMMERCE International Trade Administration A-552-801 Certain Frozen Fish Fillets from the Socialist Republic of Vietnam: Extension of Time Limits for the Preliminary Results of the 3rd Administrative Review AGENCY: Import Administration, International Trade Administration, Department of Commerce. EFFECTIVE DATE: August 3, 2007. FOR FURTHER INFORMATION CONTACT: Paul Walker, AD/CVD Operations, Office 9, Import Administration, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue, NW., Washington DC 20230; telephone:
(202)482-0413. SUPPLEMENTARY INFORMATION: Background On September 29, 2006, the Department published a notice of initiation of a review of certain frozen fish fillets from the Socialist Republic of Vietnam (“Vietnam”), covering the period August 1, 2005, through July 31, 2006. 1 *See Initiation of Antidumping and Countervailing Duty Administrative Reviews* , 71 FR 57465 (September 29, 2006). 1 In accordance with the *Circumvention Inquiry* , the period of review for Lian Heng Investment Co., Ltd. and Lian Heng Trading Co., Ltd. Is October 22, 2004 through July 31, 2006. *See Circumvention and Scope Inquiries on the Antidumping Duty Order on Certain Frozen Fish Fillets from the Socialist Republic of Vietnam: Partial Affirmative Final Determination of Circumvention of the Antidumping Duty Order, Partial Final Termination of Circumvention Inquiry and Final Rescission of Scope Inquiry* , 71 FR 38608 (July 7, 2006) (“Circumvention Inquiry”). Extension of Time Limit of Preliminary Results The Department determines that completion of the preliminary results of these reviews within the statutory time period is not practicable because the case is extraordinarily complicated. See section 751(a)(2)(B)(iv) of the Act. The Third administrative review covers four companies, and to conduct the sales and factor analyses for each requires the Department to gather and analyze a significant amount of information pertaining to each company's sales practices and manufacturing methods. In addition, two companies involve complicated affiliation and collapsing issues. The Department requires additional time to analyze these issues. Therefore, given the number and complexity of issues in this case, and in accordance with section 751(a)(3)(A) of the Act, we are extending the time period for issuing the preliminary results of review by 30 days until August 31, 2007. The final results continue to be due 120 days after the publication of the preliminary results. This notice is published pursuant to section 751(a)(2)(C)(3)(A) of the Act and section 351.214(h)(I)(1) of the Department's regulations. Dated: July 26, 2007. Stephen J. Claeys, Deputy Assistant Secretary for Import Administration. [FR Doc. E7-15033 Filed 8-2-07; 8:45 am] BILLING CODE 3510-DS-S DEPARTMENT OF COMMERCE International Trade Administration (A-588-835) Oil Country Tubular Goods from Japan: Final Results and Rescission of Antidumping Duty Administrative Review AGENCY: Import Administration, International Trade Administration, U.S. Department of Commerce. SUMMARY: On May 2, 2007, the Department of Commerce (the Department) published in the **Federal Register** a notice of intent to rescind the administrative review of the antidumping duty order on Oil Country Tubular Goods
(OCTG)from Japan. See Oil Country Tubular Goods from Japan: Preliminary Results of Antidumping Duty Administrative Review and Intent to Rescind Administrative Review, 72 FR 24275 (May 2, 2007) (Preliminary Results). This review covers four manufactures/exporters: JFE Steel Corporation (JFE), Nippon Steel Corporation (Nippon), NKK Tubes
(NKK)and Sumitomo Metal Industries, Ltd. (SMI). The period of review
(POR)covers sales of subject merchandise to the United States during the period August 1, 2005 through July 31, 2006. We provided interested parties with an opportunity to comment on the notice of intent to rescind this administrative review. However, we received no comments from interested parties. Consequently, we are rescinding this administrative review. EFFECTIVE DATE: August 3, 2007. FOR FURTHER INFORMATION CONTACT: Jun Jack Zhao or Dana Mermelstein, AD/CVD Operations, Office 6, Import Administration, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue, NW, Washington, DC 20230; telephone:
(202)482-1396 or
(202)482-1391, respectively. SUPPLEMENTARY INFORMATION: Background On May 2, 2007, the Department published in the **Federal Register** a notice of intent to rescind the antidumping duty administrative review of the antidumping duty order on OCTG from Japan. No interested parties filed case briefs in response to the Department's invitation to comment on the *Preliminary Results* . Scope of the Order The products covered by this order are OCTG, hollow steel products of circular cross-section, including only oil well casing and tubing, of iron (other than cast iron) or steel (both carbon and alloy), whether seamless or welded, whether or not conforming to American Petroleum Institute
(API)or non-API specifications, whether finished or unfinished (including green tubes and limited service OCTG products). This scope does not cover casing, tubing, or drill pipe containing 10.5 percent or more of chromium. The products subject to this order are currently classified in the Harmonized Tariff Schedule of the United States (HTSUS) under sub-headings: 7304.29.10.10, 7304.29.10.20, 7304.29.10.30, 7304.29.10.40, 7304.29.10.50, 7304.29.10.60, 7304.29.10.80, 7304.29.20.10, 7304.29.20.20, 7304.29.20.30, 7304.29.20.40, 7304.29.20.50, 7304.29.20.60, 7304.29.20.80, 7304.29.30.10, 7304.29.30.20, 7304.29.30.30, 7304.29.30.40, 7304.29.30.50, 7304.29.30.60, 7304.29.30.80, 7304.29.40.10, 7304.29.40.20, 7304.29.40.30, 7304.29.40.40, 7304.29.40.50, 7304.29.40.60, 7304.29.40.80, 7304.29.50.15, 7304.29.50.30, 7304.29.50.45, 7304.29.50.60, 7304.29.50.75, 7304.29.60.15, 7304.29.60.30, 7304.29.60.45, 7304.29.60.60, 7304.29.60.75, 7305.20.20.00, 7305.20.40.00, 7305.20.60.00, 7305.20.80.00, 7306.20.10.30, 7306.20.10.90, 7306.20.20.00, 7306.20.30.00, 7306.20.40.00, 7306.20.60.10, 7306.20.60.50, 7306.20.80.10, and 7306.20.80.50. As a result of recent changes to the HTSUS, effective February 2, 2007, the subject merchandise is also classifiable under the following additional HTSUS item numbers: 7304.29.31.10, 7304.29.31.20, 7304.29.31.30, 7304.29.31.40, 7304.29.31.50, 7304.29.31.60, 7304.29.31.80, 7304.29.41.10, 7304.29.41.20, 7304.29.41.30, 7304.29.41.40, 7304.29.41.50, 7304.29.41.60, 7304.29.41.80, 7304.29.61.15, 7304.29.61.30, 7304.29.61.45, 7304.29.61.60, 7304.29.61.75, 7306.29.10.30, 7306.29.10.90, 7306.29.20.00, 7306.29.31.00, 7306.29.41.00, 7306.29.60.10, 7306.29.60.50, 7306.29.81.10, and 7306.29.81.50. The HTSUS sub-headings are provided for convenience and customs purposes only. The written description of the scope of the order remains dispositive. Final Results and Rescission of Administrative Review As stated in the *Preliminary Results* , the Department determined that all four companies had no reviewable sales of subject merchandise during the POR. Although our review of data from U.S. Customs and Border Protection
(CBP)showed that there were entries during the POR of merchandise produced by these companies, based on our analysis of the CBP information and documentation submitted by respondent companies, we determined that those entries were either made by unaffiliated resellers without the knowledge of the respondent companies, or were merchandise out of the scope of antidumping duty order. As such, they are not subject to the administrative review. See memorandum from Jun Jack Zhao, Case Analyst, to Barbara E. Tillman, Director, AD/CVD Operations, Office 6, *Analysis Memorandum regarding the Administrative Review of the Antidumping Duty Order on Oil Country Tubular Goods from Japan (A-588-835)* , dated concurrently with the *Preliminary Results* . Because we did not receive comments from any of the interested parties on the *Preliminary Results* , we do not have any reason to reconsider our preliminary decision. Therefore, consistent with the Department's preliminary results of this review, and in accordance with 19 CFR § 351.213(d)(3), we are rescinding the review with respect to all four companies. Duty Assessment The Department will determine, and CBP shall assess, antidumping duties on all appropriate entries, pursuant to section 751(a) of the Tariff Act of 1930, as amended (the Act) and 19 CFR § 351.212(b). We will direct CBP to liquidate any entries of subject merchandise manufactured by JFE, Nippon, NKK, SMI, and entered or withdrawn from warehouse for consumption during the POR, at the “all others” rate from the investigation, 44.20 percent, in accordance with the Department's clarification of its “automatic assessment” regulation; the sales of any such entries were made by intermediary companies (e.g., resellers) that do not have their own rates because they were not covered in this review, a prior review, or the less than fair value
(LTFV)investigation. *See Antidumping and Countervailing Duty Proceedings: Assessment of Antidumping Duties* , 68 FR 23954 (May 6, 2003). The Department intends to issue appropriate assessment instructions directly to CBP 15 days after the date of publication of these final results. Cash Deposit Requirements On May 31, 2007, the U.S. International Trade Commission determined that revoking the existing antidumping duty orders on imports of OCTG from Argentina, Italy, Japan, Korea and Mexico would be unlikely to lead to continuation or recurrence of material injury. As a result, the Department revoked these antidumping duty orders. *See Oil Country Tubular Goods from Argentina, Italy, Japan, Korea, and Mexico; Revocation of Antidumping Duty Orders Pursuant to Second Five-year (Sunset) Reviews* , 72 FR 34442 (June 22, 2007). The effective date of the revocation of this order was July 25, 2006. Consequently, the Department has instructed CBP to discontinue the suspension of liquidation of all entries of subject merchandise entered on or after July 25, 2006. Therefore, no further cash deposits of estimated antidumping duties will be required, and antidumping duties will not be assessed on entries after July 24, 2006. Notification to Importers This notice serves as a final reminder to importers of their responsibility under 19 CFR § 351.402(f) to file a certificate regarding the reimbursement of antidumping duties prior to liquidation of the relevant entries during this review period. Failure to comply with this requirement could result in the Secretary's presumption that reimbursement of antidumping duties occurred and the subsequent assessment of double antidumping duties. Administrative Protective Orders This notice also serves as a reminder to parties subject to administrative protective orders
(APOs)of their responsibility concerning the return or destruction of proprietary information disclosed under APO in accordance with 19 CFR § 351.305. Timely written notification of the return/destruction of APO materials or conversion to judicial protective order is hereby requested. Failure to comply with the regulations and terms of an APO is a violation that is subject to sanction. This administrative review and notice are issued and published in accordance with sections 751(a)(1) and 777(i)(1) of the Act. Dated: July 27, 2007. David M. Spooner, Assistant Secretary for Import Administration. [FR Doc. E7-15158 Filed 8-2-07; 8:45 am] BILLING CODE 3510-DS-S DEPARTMENT OF COMMERCE International Trade Administration A-583-831 Stainless Steel Sheet and Strip in Coils from Taiwan: Preliminary Results and Rescission in Part of Antidumping Duty Administrative Review AGENCY: Import Administration, International Trade Administration, Department of Commerce. SUMMARY: The Department of Commerce (the Department) is conducting an administrative review of the antidumping duty order on stainless steel sheet and strip in coils (SSSSC) from Taiwan with respect to three companies. 1 There is only one respondent participating in this review, Chia Far Industrial Factory Co., Ltd. (Chia Far). The period of review
(POR)is July 1, 2005, through June 30, 2006. 1 This figure does not include those companies for which the Department is preliminarily rescinding the administrative review. We preliminarily determine that sales made by Chia Far have been made below normal value (NV). We have preliminarily assigned a margin based on adverse facts available
(AFA)to the remaining two respondents, PFP Taiwan Co., Ltd. (PFP Taiwan) and Yieh Corp., because these companies were not responsive to the Department's requests for information.If the preliminary results are adopted in our final results of administrative review, we will instruct U.S. Customs and Border Protection
(CBP)to assess antidumping duties on all appropriate entries. Interested parties are invited to comment on the preliminary results. EFFECTIVE DATE: August 3, 2007. FOR FURTHER INFORMATION CONTACT: Elizabeth Eastwood, AD/CVD Operations, Office 2, Import Administration-Room B099, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue, NW., Washington, DC 20230; telephone:
(202)482-3874. SUPPLEMENTARY INFORMATION: Background On July 27, 1999, the Department published in the **Federal Register** the antidumping duty order on SSSSC from Taiwan. *See Notice of Antidumping Duty Order; Stainless Steel Sheet and Strip in Coils From United Kingdom, Taiwan, and South Korea* , 64 FR 40555 (July 27, 1999) ( *SSSSC Order* ). On July 3, 2006, the Department published in the **Federal Register** a notice of opportunity to request administrative review of the antidumping duty order on SSSSC from Taiwan. *See Antidumping or Countervailing Duty Order, Finding, or Suspended Investigation; Opportunity To Request Administrative Review* , 71 FR 37890 (July 3, 2006). On July 31, 2006, the petitioners 2 submitted a timely letter requesting that the Department conduct an administrative review of the sales of SSSSC made during the POR by Chain Chon Industrial Co., Ltd., Chia Far, Chien Shing Stainless Co., China Steel Corporation, Emerdex Stainless Flat-Rolled Products, Inc., Emerdex Stainless Steel, Inc., Emerdex Group., Goang Jau Shing Enterprise Co., Ltd., PFP Taiwan, Ta Chen Stainless Pipe Co., Ltd., Tang Eng Iron Works, Yieh Loong Enterprise Co., Ltd. (also known as Chung Hung Steel Co., Ltd.), Yieh Trading Corp. (also known as Yieh Corp.), Yieh Mau Corp., and Yieh United Steel Corporation, pursuant to section 751(a) of the Tariff Act of 1930, as amended (the Act), and in accordance with 19 CFR 351.213(b)(1). On August 30, 2006, the Department published a notice of initiation of administrative review covering each of these 15 companies. *See Initiation of Antidumping and Countervailing Duty Administrative Reviews and Requests for Revocation in Part* , 71 FR 51573 (Aug. 30, 2006) ( *Notice of Initiation* ). 2 The petitioners are Allegheny Ludlum Corporation, United Auto Workers Local 3303 (formerly Butler Armco Independent Union), United Steelworkers of America, AFL-CIO/CLC, and Zanesville Armco Independent Organization. In August 2006, the Department issued its antidumping questionnaire to all of the companies for which a review was requested except the Emerdex companies (for further discussion of the Emerdex companies, see the section of this notice entitled “Emerdex Companies,” below). In August and September 2006, we received submissions from 10 companies indicating that they made no shipments of subject merchandise during the POR. Because we did not receive a response to the antidumping duty questionnaire from PFP Taiwan, on September 7, 2006, we re-issued the questionnaire to this company and requested that it submit a full response. Because PFP Taiwan also did not respond to the second questionnaire, we are assigning it a preliminary dumping margin based on AFA. For further discussion, see the “Application of Facts Available” section of this notice, below. On September 15, 2006, we received a response to section A of the questionnaire ( *i.e.* , the section covering general information) from Chia Far and on October 10, 2006, we received Chia Far's response to sections B, C, and D of the questionnaire ( *i.e.* , the sections covering home market sales, U.S. sales, and cost of production (COP)/constructed value (CV), respectively). We issued a supplemental questionnaire covering sections A through C to Chia Far on December 22, 2006. Chia Far responded to this questionnaire on January 16, 2007. On January 29, 2007, we obtained information from CBP indicating that Yieh Corp., one of the companies claiming to have no shipments of SSSSC to the United States during the POR, did in fact make U.S. shipments of subject merchandise. Consequently, on February 1, 2007, we requested that Yieh Corp. explain why it did not report the entries in question. On March 5, 2007, Yieh Corp. stated that its failure to do so was an oversight. On March 26, 2007, the Department postponed the preliminary results in this review until no later than July 31, 2007. *See Stainless Steel Sheet and Strip in Coils from Taiwan; Notice of Extension of Time Limits for Preliminary Results of Antidumping Duty Administrative Review* , 72 FR 14077 (Mar. 26, 2007). On March 30, 2007, we issued Chia Far a second supplemental questionnaire covering sections A through C, as well as a supplemental questionnaire covering section D. Chia Far responded to these questionnaires on April 20, 2007, and April 27, 2007, respectively. On May 22, 2007, we issued a second supplemental section D questionnaire to Chia Far. On May 24, 2007, we re-issued the antidumping duty questionnaire to Yieh Corp. and requested that it submit a full response. Because Yieh Corp. did not respond to this questionnaire, we are assigning it a preliminary dumping margin based on AFA. For further discussion, see the “Application of Facts Available” section of this notice, below. On June 7, 2007, we received Chia Far's response to the Department's second supplemental section D questionnaire. In June and July 2007, we conducted a verification of the sales and cost data reported by Chia Far. We have incorporated our sales verification findings in these preliminary results. However, because the cost verification was conducted too close to the preliminary results deadline, we were unable to take any findings from the cost verification into account here. We will consider these findings in our final results. Period of Review The POR is July 1, 2005, through June 30, 2006. Scope of the Order The products covered by the order are certain stainless steel sheet and strip in coils. Stainless steel is an alloy steel containing, by weight, 1.2 percent or less of carbon and 10.5 percent or more of chromium, with or without other elements. The subject sheet and strip is a flat-rolled product in coils that is greater than 9.5 mm in width and less than 4.75 mm in thickness, and that is annealed or otherwise heat treated and pickled or otherwise descaled. The subject sheet and strip may also be further processed ( *e.g.* , cold-rolled, polished, aluminized, coated, etc.) provided that it maintains the specific dimensions of sheet and strip following such processing. The merchandise subject to the order is classified in the Harmonized Tariff Schedule of the United States (HTSUS) at subheadings: 7219.13.00.31, 7219.13.00.51, 7219.13.00.71, 7219.13.00.81, 7219.14.00.30, 7219.14.00.65, 7219.14.00.90, 7219.32.00.05, 7219.32.00.20, 7219.32.00.25, 7219.32.00.35, 7219.32.00.36, 7219.32.00.38, 7219.32.00.42, 7219.32.00.44, 7219.33.00.05, 7219.33.00.20, 7219.33.00.25, 7219.33.00.35, 7219.33.00.36, 7219.33.00.38, 7219.33.00.42, 7219.33.00.44, 7219.34.00.05, 7219.34.00.20, 7219.34.00.25, 7219.34.00.30, 7219.34.00.35, 7219.35.00.05, 7219.35.00.15, 7219.35.00.30, 7219.35.00.35, 7219.90.00.10, 7219.90.00.20, 7219.90.00.25, 7219.90.00.60, 7219.90.00.80, 7220.12.10.00, 7220.12.50.00, 7220.20.10.10, 7220.20.10.15, 7220.20.10.60, 7220.20.10.80, 7220.20.60.05, 7220.20.60.10, 7220.20.60.15, 7220.20.60.60, 7220.20.60.80, 7220.20.70.05, 7220.20.70.10, 7220.20.70.15, 7220.20.70.60, 7220.20.70.80, 7220.20.80.00, 7220.20.90.30, 7220.20.90.60, 7220.90.00.10, 7220.90.00.15, 7220.90.00.60, and 7220.90.00.80. Although the HTSUS subheadings are provided for convenience and customs purposes, the Department's written description of the merchandise under the order is dispositive. Excluded from the scope of the order are the following: 1) sheet and strip that is not annealed or otherwise heat treated and pickled or otherwise descaled, 2) sheet and strip that is cut to length, 3) plate ( *i.e.* , flat-rolled stainless steel products of a thickness of 4.75 mm or more), 4) flat wire ( *i.e.* , cold-rolled sections, with a prepared edge, rectangular in shape, of a width of not more than 9.5 mm), and 5) razor blade steel. Razor blade steel is a flat-rolled product of stainless steel, not further worked than cold-rolled (cold-reduced), in coils, of a width of not more than 23 mm and a thickness of 0.266 mm or less, containing, by weight, 12.5 to 14.5 percent chromium, and certified at the time of entry to be used in the manufacture of razor blades. *See* Chapter 72 of the HTSUS, “Additional U.S. Note” 1(d). Also excluded from the scope of the order are certain specialty stainless steel products described below. Flapper valve steel is defined as stainless steel strip in coils containing, by weight, between 0.37 and 0.43 percent carbon, between 1.15 and 1.35 percent molybdenum, and between 0.20 and 0.80 percent manganese. This steel also contains, by weight, phosphorus of 0.025 percent or less, silicon of between 0.20 and 0.50 percent, and sulfur of 0.020 percent or less. The product is manufactured by means of vacuum arc remelting, with inclusion controls for sulphide of no more than 0.04 percent and for oxide of no more than 0.05 percent. Flapper valve steel has a tensile strength of between 210 and 300 ksi, yield strength of between 170 and 270 ksi, plus or minus 8 ksi, and a hardness
(Hv)of between 460 and 590. Flapper valve steel is most commonly used to produce specialty flapper valves in compressors. Also excluded is a product referred to as suspension foil, a specialty steel product used in the manufacture of suspension assemblies for computer disk drives. Suspension foil is described as 302/304 grade or 202 grade stainless steel of a thickness between 14 and 127 microns, with a thickness tolerance of plus-or-minus 2.01 microns, and surface glossiness of 200 to 700 percent Gs. Suspension foil must be supplied in coil widths of not more than 407 mm, and with a mass of 225 kg or less. Roll marks may only be visible on one side, with no scratches of measurable depth. The material must exhibit residual stresses of 2 mm maximum deflection, and flatness of 1.6 mm over 685 mm length. Certain stainless steel foil for automotive catalytic converters is also excluded from the scope of the order. This stainless steel strip in coils is a specialty foil with a thickness of between 20 and 110 microns used to produce a metallic substrate with a honeycomb structure for use in automotive catalytic converters. The steel contains, by weight, carbon of no more than 0.030 percent, silicon of no more than 1.0 percent, manganese of no more than 1.0 percent, chromium of between 19 and 22 percent, aluminum of no less than 5.0 percent, phosphorus of no more than 0.045 percent, sulfur of no more than 0.03 percent, lanthanum of less than 0.002 or greater than 0.05 percent, and total rare earth elements of more than 0.06 percent, with the balance iron. Permanent magnet iron-chromium-cobalt alloy stainless strip is also excluded from the scope of the order. This ductile stainless steel strip contains, by weight, 26 to 30 percent chromium, and 7 to 10 percent cobalt, with the remainder of iron, in widths 228.6 mm or less, and a thickness between 0.127 and 1.270 mm. It exhibits magnetic remanence between 9,000 and 12,000 gauss, and a coercivity of between 50 and 300 oersteds. This product is most commonly used in electronic sensors and is currently available under proprietary trade names such as Arnokrome III. 3 3 Arnokrome III is a trademark of the Arnold Engineering Company. Certain electrical resistance alloy steel is also excluded from the scope of the order. This product is defined as a non-magnetic stainless steel manufactured to American Society of Testing and Materials
(ASTM)specification B344 and containing, by weight, 36 percent nickel, 18 percent chromium, and 46 percent iron, and is most notable for its resistance to high temperature corrosion. It has a melting point of 1390 degrees Celsius and displays a creep rupture limit of 4 kilograms per square millimeter at 1000 degrees Celsius. This steel is most commonly used in the production of heating ribbons for circuit breakers and industrial furnaces, and in rheostats for railway locomotives. The product is currently available under proprietary trade names such as Gilphy 36. 4 4 Gilphy 36 is a trademark of Imphy, S.A. Certain martensitic precipitation-hardenable stainless steel is also excluded from the scope of the order. This high-strength, ductile stainless steel product is designated under the Unified Numbering System
(UNS)as S45500-grade steel, and contains, by weight, 11 to 13 percent chromium, and 7 to 10 percent nickel. Carbon, manganese, silicon and molybdenum each comprise, by weight, 0.05 percent or less, with phosphorus and sulfur each comprising, by weight, 0.03 percent or less. This steel has copper, niobium, and titanium added to achieve aging, and will exhibit yield strengths as high as 1700 Mpa and ultimate tensile strengths as high as 1750 Mpa after aging, with elongation percentages of 3 percent or less in 50 mm. It is generally provided in thicknesses between 0.635 and 0.787 mm, and in widths of 25.4 mm. This product is most commonly used in the manufacture of television tubes and is currently available under proprietary trade names such as Durphynox 17. 5 5 Durphynox 17 is a trademark of Imphy, S.A. Finally, three specialty stainless steels typically used in certain industrial blades and surgical and medical instruments are also excluded from the scope of the order. These include stainless steel strip in coils used in the production of textile cutting tools ( *e.g.* , carpet knives). 6 This steel is similar to AISI grade 420 but containing, by weight, 0.5 to 0.7 percent of molybdenum. The steel also contains, by weight, carbon of between 1.0 and 1.1 percent, sulfur of 0.020 percent or less, and includes between 0.20 and 0.30 percent copper and between 0.20 and 0.50 percent cobalt. This steel is sold under proprietary names such as GIN4 Mo. The second excluded stainless steel strip in coils is similar to AISI 420-J2 and contains, by weight, carbon of between 0.62 and 0.70 percent, silicon of between 0.20 and 0.50 percent, manganese of between 0.45 and 0.80 percent, phosphorus of no more than 0.025 percent and sulfur of no more than 0.020 percent. This steel has a carbide density on average of 100 carbide particles per 100 square microns. An example of this product is GIN5 steel. The third specialty steel has a chemical composition similar to AISI 420 F, with carbon of between 0.37 and 0.43 percent, molybdenum of between 1.15 and 1.35 percent, but lower manganese of between 0.20 and 0.80 percent, phosphorus of no more than 0.025 percent, silicon of between 0.20 and 0.50 percent, and sulfur of no more than 0.020 percent. This product is supplied with a hardness of more than Hv 500 guaranteed after customer processing, and is supplied as, for example, GIN6. 7 6 This list of uses is illustrated and provided for descriptive purposes only. 7 GIN4 Mo, GIN5 and GIN6 are the proprietary grades of Hitachi Metals America, Ltd. Partial Preliminary Rescission of Review As noted in the “Background” section, above, 10 respondents certified to the Department that they had no shipments/entries of subject merchandise into the United States during the POR. These companies are: 1) Chain Chon Industrial Co., Ltd.; 2) Chien Shing Stainless Co.; 3) China Steel Corporation; 4) Goang Jau Shing Enterprise Co., Ltd.; 5) Ta Chen Stainless Pipe Co., Ltd.; 6) Tang Eng Iron Works; 7) Yieh Loong Enterprise Co. Ltd.; 8) Yieh Mau Corp.; 9) Yieh Corp.; and 10) Yieh United Steel Corporation. The Department subsequently obtained CBP information consistent with the no-shipment claims made by each of these companies except Yieh Corp. *See* the June 19, 2007, Memorandum to The File from Jill Pollack, Senior Analyst, entitled, “CBP List of Exporters” (the “CBP Memo”). Because the evidence on the record does not indicate that these nine companies exported subject merchandise to the United States during the POR, we preliminarily determine it is appropriate to rescind the review for these respondents. *See Chia Far Industrial Factory Co., Ltd. v. United States* , 343 F. Supp 2d 1344, 1374 (2004). Therefore, in accordance with 19 CFR 351.213(d)(3) and consistent with the Department's practice, we are preliminarily rescinding our review with respect to Chain Chon Industrial Co., Ltd., Chien Shing Stainless Co., China Steel Corporation, Goang Jau Shing Enterprise Co., Ltd., Ta Chen Stainless Pipe Co., Ltd., Tang Eng Iron Works, Yieh Loong Enterprise Co., Ltd, Yieh Mau Corp, and Yieh United Steel Corporation. *See, e.g., Notice of Final Results and Partial Rescission of Antidumping Duty Administrative Review: Certain Welded Carbon Steel Pipe and Tube from Turkey* , 63 FR 35190, 35191 (June 29, 1998); *Certain Steel Concrete Reinforcing Bars From Turkey; Final Results, Rescission of Antidumping Duty Administrative Review in Part, and Determination To Revoke in Part* , 70 FR 67665, 67666 (Nov. 8, 2005). Regarding the tenth company, Yieh Corp., CBP information indicated that this company may, in fact, have had shipments or entries of subject merchandise entered into the United States during the POR. *See* the CBP Memo. Based on the CBP information, on February 1, 2007, we requested that Yieh Corp. explain the entries at issue. In a response dated March 5, 2007, Yieh Corp. stated that it had inadvertently overlooked the shipments in question. As a result, on May 24, 2007, we afforded Yieh Corp. an additional opportunity to respond to the questionnaire. Yieh Corp. did not respond to this questionnaire. Because Yieh Corp. had shipments of subject merchandise during the POR, we are not rescinding the administrative review with respect to it. For further information, see the “Application of Facts Available” section of this notice. Emerdex Companies The Department finds that it is appropriate to rescind the instant review with respect to the Emerdex Companies named by the petitioners in their review request because the Department found in the 2003-2004 administrative review of this order that the Emerdex companies are U.S. entities. *See Stainless Steel Sheet and Strip in Coils from Taiwan: Preliminary Results and Rescission in Part of Antidumping Duty Administrative Review* , 71 FR 45521, 45524-45525 (Aug. 9, 2006) (unchanged in *Stainless Steel Sheet and Strip in Coils From Taiwan; Final Results and Partial Rescission of Antidumping Duty Administrative Review* , 71 FR 75504 (Dec. 15, 2006). We note that the petitioners in the instant review have not provided any additional information demonstrating that the Emerdex companies for which they have requested a review are located in Taiwan. Consequently, consistent with the Department's findings in the prior review, we are preliminarily rescinding this review with regard to the Emerdex companies. Application of Facts Available Section 776(a) of the Act provides that the Department will apply “facts otherwise available” if, *inter alia* , necessary information is not available on the record or an interested party: 1) withholds information that has been requested by the Department; 2) fails to provide such information within the deadlines established, or in the form or manner requested by the Department, subject to subsections (c)(1) and
(e)of section 782 of the Act; 3) significantly impedes a proceeding; or 4) provides such information, but the information cannot be verified. As discussed in the “Background” section above, in August 2006, the Department requested that the 12 companies subject to this review respond to the Department's questionnaire. The original deadline to file a response was September 1, 2006. One of these 12 companies, PFP Taiwan, did not respond to the Department's initial request for information. Subsequently, in September 2006, the Department issued a letter to this company affording it a second opportunity to submit a response to the Department's questionnaire. However, PFP Taiwan also did not respond to this second questionnaire. On July 31, 2007, the Department placed documentation on the record confirming delivery of the questionnaire to this company. *See* the July 31, 2007, Memorandum to the File from Elizabeth Eastwood, Senior Analyst, entitled, “Confirmation of Delivery of the Questionnaire in the 2005-2006 Antidumping Duty Administrative Review on Stainless Steel Sheet and Strip in Coils from Taiwan.” By failing to respond to the Department's questionnaire, this company withheld requested information and significantly impeded the proceeding. Thus, pursuant to sections 776(a)(2)(A) and
(C)of the Act, because this company did not respond to the Department's questionnaire, the Department preliminarily finds that the use of total facts available is warranted. Furthermore, one additional company, Yieh Corp., claimed that it made no shipments of subject merchandise to the United States during the POR. However, according to data obtained from CBP, it appeared that Yieh Corp. may, in fact, have made shipments of subject merchandise to the United States during the POR. On January 29, 2007, we placed copies of the entry documentation related to these shipments on the record of this proceeding. *See* the January 29, 2007, Memorandum to the File from Jill Pollack, Senior Analyst, entitled, “2005-2006 Administrative Review of Stainless Steel Sheet and Strip in Coils from Taiwan: Entry Documents from U.S. Customs and Border Protection (CBP).” On February 1, 2007, we requested that Yieh Corp. explain why it did not report the entries in question. On March 5, 2007, Yieh Corp. responded by stating that it had inadvertently overlooked them. On May 24, 2007, we informed Yieh Corp. that it was required to respond to the Department's questionnaire no later then June 7, 2007. Because Yieh Corp. did not respond to this questionnaire, we find that Yieh Corp. withheld requested information and significantly impeded the proceeding. Thus, pursuant to sections 776(a)(2)(A) and
(C)of the Act, the Department preliminarily finds that the use of total facts available is warranted for Yieh Corp. According to section 776(b) of the Act, if the Department finds that an interested party fails to cooperate by not acting to the best of its ability to comply with requests for information, the Department may use an inference that is adverse to the interests of that party in selecting from the facts otherwise available. *See also Notice of Final Results of Antidumping Duty Administrative Review: Stainless Steel Bar from India* , 70 FR 54023, 54025-26 (Sept. 13, 2005); and *Notice of Final Determination of Sales at Less Than Fair Value and Final Negative Critical Circumstances: Carbon and Certain Alloy Steel Wire Rod from Brazil* , 67 FR 55792, 55794-96 (Aug. 30, 2002). Adverse inferences are appropriate “to ensure that the party does not obtain a more favorable result by failing to cooperate than if it had cooperated fully.” *See Statement of Administrative Action accompanying the Uruguay Round Agreements Act* , H.R. Rep. No. 103-316, Vol. 1
(1994)at 870 (SAA), reprinted in 1994 U.S.C.C.A.N. 4040, 4198-99. Furthermore, “affirmative evidence of bad faith on the part of a respondent is not required before the Department may make an adverse inference.” *See Antidumping Duties; Countervailing Duties; Final Rule* , 62 FR 27296, 27340 (May 19, 1997); *see also Nippon Steel Corp. v. United States* , 337 F.3d 1373, 1382-83 (Fed. Cir. 2003) ( *Nippon* ). We preliminarily find that PFP Taiwan and Yieh Corp. did not act to the best of their abilities in this administrative review, within the meaning of section 776(b) of the Act, because they could have responded to the Department's requests for information, but failed to do so. Therefore, an adverse inference is warranted in selecting from the facts otherwise available with respect to these companies. *See Nippon* , 337 F.3d at 1382-83. Section 776(b) of the Act provides that the Department may use as AFA information derived from: 1) The petition; 2) the final determination in the investigation; 3) any previous review; or 4) any other information placed on the record. The Department's practice, when selecting an AFA rate from among the possible sources of information, has been to ensure that the margin is sufficiently adverse “as to effectuate the statutory purposes of the adverse facts available rule to induce respondents to provide the Department with complete and accurate information in a timely manner.” *See, e.g., Certain Steel Concrete Reinforcing Bars from Turkey; Final Results and Rescission of Antidumping Duty Administrative Review in Part* , 71 FR 65082, 65084 (Nov. 7, 2006). In order to ensure that the margin is sufficiently adverse so as to induce cooperation, we have preliminarily assigned a rate of 21.10 percent, which is the highest appropriate dumping margin from this or any prior segment of the proceeding. *See* section 776(b)(2) of the Act. This rate was the highest petition margin and was used as AFA in numerous antidumping duty administrative reviews of this order. *See, e.g., Stainless Steel Sheet and Strip in Coils from Taiwan: Final Results and Partial Rescission of Antidumping Duty Administrative Review* , 71 FR 7519, 7521 (Feb. 13, 2006) ( *2003-2004 SSSSC from Taiwan* ). The Department notes that, while the highest dumping margin calculated during this or any prior segment of the proceeding is 36.44 percent, this margin represents a combined rate applied to a channel transaction in the less-than-fair-value
(LTFV)segment of this proceeding, and it is based on “middleman dumping” by a different respondent. *See Tung Mung Development Co. v. United States* , 219 F. Supp. 2d 1333, 1345 (CIT 2002), *aff'd* 354 F. 3d 1371, 1382 (Fed. Cir. 2004). Where circumstances indicate that a particular dumping margin is not appropriate as AFA, the Department will disregard the margin and determine another more appropriate one as facts available. *See Fresh Cut Flowers from Mexico; Final Results of Antidumping Duty Administrative Review* , 61 FR 6812, 6814 (Feb. 22, 1996) (where the Department disregarded the highest dumping margin for use as AFA because the margin was based on another company's uncharacteristic business expense, resulting in an unusually high dumping margin). An AFA rate based on middleman dumping would be inappropriate to use here given that the record does not indicate that any of PFP Taiwan's or Yieh Corp.'s exports to the United States during the POR involved a middleman. Thus, consistent with previous reviews, the Department has continued to use as AFA the highest dumping margin from any segment of the proceeding for a producer's direct exports to the United States, without middleman dumping, which is 21.10 percent. Section 776(c) of the Act requires that the Department, to the extent practicable, corroborate secondary information from independent sources that are reasonably at its disposal. Secondary information is defined as “{i}nformation derived from the petition that gave rise to the investigation or review, the final determination concerning the subject merchandise, or any previous review under section 751 concerning the subject merchandise.” *See* SAA at 870. The SAA clarifies that “corroborate” means that the Department will satisfy itself that the secondary information to be used has probative value. *Id* . As noted in *F.Lii de Cecco di Filippo Fara S. Martino, S.p.A. v. United States* , 216 F.3d 1027, 1030 (2000), to corroborate secondary information, the Department will, to the extent practicable, examine the reliability and relevance of the information. The rate of 21.10 percent constitutes secondary information. To corroborate this rate, among other things, we compared it to the transaction-specific rates calculated for Chia Far and found it to be reliable and relevant for use in this administrative review. For the company-specific information used to corroborate this rate, see the July 31, 2007, memorandum to the File from Elizabeth Eastwood, Senior Analyst, entitled, “Corroboration of Adverse Facts Available Rate for the Preliminary Results in the 2005-2006 Antidumping Duty Administrative Review of Stainless Steel Sheet and Strip in Coils From Taiwan.” We find the 21.10 percent rate to be probative because it does not appear to be aberrational when compared to Chia Far's transaction-specific rates and no information has been presented to call into question the relevance of the rate. Thus, we find that the rate of 21.10 percent is sufficiently corroborated for purposes of the instant administrative review. Affiliation During the first administrative review in this proceeding, the Department found Chia Far and its U.S. reseller, Lucky Medsup Inc. (Lucky Medsup), to be affiliated by way of a principal-agent relationship. The Department primarily based its finding on: 1) A document demonstrating the existence of a principal-agent relationship; 2) Chia Far's degree of involvement in sales between Lucky Medsup and its customers; 3) evidence indicating Chia Far knew the identity of Lucky Medsup's customers, and the customers were aware of Chia Far; 4) Lucky Medsup's operations as a “go-through” who did not maintain any inventory or further manufacture products; and, 5) Chia Far's inability to provide any documents to support its claim that the document indicating a principal-agent relationship was not valid during the POR. *See Stainless Steel Sheet and Strip in Coils from Taiwan: Final Results and Partial Rescission of Antidumping Duty Administrative Review* , 67 FR 6682 (Feb. 13, 2002) and the accompanying Issues and Decision Memorandum at Comment 23 (upheld by the Court of International Trade
(CIT)in *Chia Far Industrial Factory Co. Ltd. v. United States, et al.* , 343 F. Supp. 2d 1344, 1356 (CIT 2004)). *See also* the July 31, 2007, memorandum from Elizabeth Eastwood, Senior Analyst, to the file entitled, “Placing Information Regarding the Principal-Agent Relationship between Lucky Medsup Inc. and Chia Far Industrial Factory Co., Ltd. on the Record of the 2005-2006 Antidumping Duty Administrative Review on Stainless Steel Sheet and Strip in Coils from Taiwan.” The Department continues to treat Chia Far and Lucky Medsup as affiliated parties. In the instant administrative review Chia Far contends that it is not affiliated with Lucky Medsup because: 1) there is no cross-ownership between Chia Far and Lucky Medsup and no sharing of officers or directors; 2) Lucky Medsup's owner operates independently of Chia Far as a middleman; 3) Lucky Medsup's transactions with Chia Far are at arm's length; 4) there are no exclusive distribution contracts between Lucky Medsup and Chia Far (the one that existed in 1994 was terminated in 1995); and, 5) Lucky Medsup is not obligated to sell Chia Far's merchandise and Chia Far is not obligated to sell through Lucky Medsup in the United States. We, however, find the fact pattern in the instant review is not significantly dissimilar from that which existed in the previous antidumping duty administrative reviews, where the Department had found the parties to be affiliated. *See, e.g., Stainless Steel Sheet and Strip From Taiwan; Final Results and Partial Rescission of Antidumping Duty Administrative Review* , 67 FR 6682 (Feb. 13, 2002). First and foremost, Chia Far has not provided any documents in response to the Department's request that it demonstrate that the agency agreement was terminated and the principal-agent relationship no longer exists. *See* Chia Far's January 16, 2007, supplemental questionnaire response at page 2. Furthermore, Chia Far's degree of involvement in Lucky Medsup's U.S. sales is similar to that found in prior reviews. Specifically, Chia Far knew the identity of the end-customers and of certain sales terms that the end-customers had requested before it set its price to Lucky Medsup, Lucky Medsup's sales order confirmation identifies Chia Far as the manufacturer, and Chia Far shipped the merchandise directly to the end-customers. *See* the the June 29, 2007, memorandum to the file from Shawn Thompson and Jill Pollack entitled, “Verification of the Sales Response of Chia Far Industrial Factory Co. Ltd. (Chia Far) in the Antidumping Duty Administrative Review on Stainless Steel Sheet and Strip in Coils (SSSSC) from Taiwan” at pages 8 and 9. Lastly, as was true in prior segments of this proceeding, during the instant POR Lucky Medsup did not maintain inventory or further manufacture SSSSC. Therefore, we continue to find that Chia Far is affiliated with Lucky Medsup by way of a principal-agent relationship. We invite comments from interested parties on this issue for consideration in the final results. Identifying Home Market Sales Section 773(a)(1)(B) of the Act defines NV as the price at which the foreign like product is first sold (or, in the absence of a sale, offered for sale) for consumption in the exporting country (home market), in the usual commercial quantities and in the ordinary course of trade and, to the extent practicable, at the same level of trade
(LOT)as the export price
(EP)or constructed export price (CEP). In implementing this provision, the CIT has found that sales should be reported as home market sales if the producer “knew or should have known that the merchandise {it sold} was for home consumption based upon the particular facts and circumstances surrounding the sales.” *See Tung Mung Development Co., Ltd. & Yieh United Steel Corp. v. United States, et al.* , 25 CIT 752, 783 (2001); citing *INA Walzlager Schaeffler KG v. United States* , 957 F. Supp. 251 (1997). Where a respondent has no knowledge as to the destination of subject merchandise, except that it is for export, the Department will classify such sales as export sales and exclude them from the home market sales database. *See Final Determination of Sales at Less Than Fair Value: Certain Hot-Rolled Carbon Steel Flat Products, Certain Cold-Rolled Carbon Steel Plate Products, Certain Corrosion-Resistant Carbon Steel Flat Products, and Certain Cut-to-Length Carbon Steel Plate From Korea* , 58 FR 37176, 37182 (July 9, 1993). In its October 10, 2006, questionnaire response, Chia Far stated that it has reason to believe that some of the home market customers to whom it sold SSSSC during the POR may have exported the merchandise. Specifically, Chia Far indicated that it shipped some of the SSSSC it sold to home market customers during the POR to a container yard or placed the SSSSC in an ocean shipping container at the home market customer's request. Chia Far stated that, even though the merchandise was containerized or sent to a container yard, it could not prove the merchandise was exported to a third country, and therefore, it included those sales among its reported home market sales. Although Chia Far stated that it does not definitively know whether the SSSSC in question will be exported, the Department has preliminarily determined that, based on the fact that these sales were sent to a container yard or placed in a container by Chia Far at the request of the home market customer, Chia Far should have known that the SSSSC in question was not for consumption in the home market. Therefore, consistent with this determination, the Department has preliminarily excluded these sales from Chia Far's home market sales database. Comparisons to Normal Value In order to determine whether Chia Far sold SSSSC to the United States at prices less than NV, the Department compared the EP and CEP of individual U.S. sales to the monthly weighted-average NV of sales of the foreign like product made in the ordinary course of trade. See section 777A(d)(2) of the Act; *see also* section 773(a)(1)(B)(i) of the Act. Section 771(16) of the Act defines foreign like product as merchandise that is identical or similar to subject merchandise and produced by the same person and in the same country as the subject merchandise. Thus, we considered all products covered by the scope of the order that were produced by the same person and in the same country as the subject merchandise, and sold by Chia Far in the comparison market during the POR, to be foreign like products for the purpose of determining appropriate product comparisons to SSSSC sold in the United States. During the POR, Chia Far sold subject merchandise and foreign like product that it made from hot- and cold-rolled stainless steel coils (products covered by the scope of the order) purchased from unaffiliated parties. Chia Far further processed the hot- and cold-rolled stainless steel coils by performing one or more of the following procedures: cold-rolling, bright annealing, surface finishing/shaping, and slitting. We did not consider Chia Far to be the producer of the merchandise under review if it performed insignificant processing on the coils ( *e.g.* , annealing, slitting, surface finishing). *See Stainless Steel Plate in Coils from Belgium: Final Results of Antidumping Duty Administrative Review* , 69 FR 74495 (Dec. 14, 2004) and the accompanying Issues and Decision Memorandum at Comment 4 (listing painting, slitting, finishing, pickling, oiling, and annealing as minor processing for flat-rolled products). Furthermore, we did not consider Chia Far to be the producer of the cold-rolled products that it sold if it was not the first party to cold-roll the coils. The cold-rolling process changes the surface quality and mechanical properties of the product and produces useful combinations of hardness, strength, stiffness, and ductility. Stainless steel cold-rolled coils are distinguished from hot-rolled coils by their reduced thickness, tighter tolerances, better surface quality, and increased hardness which are achieved through cold-rolling. Chia Far's cold-rolling of the cold-rolled coils that it purchased may have modified these characteristics to suit the needs of particular customers; however, it did not impart these defining characteristics to the finished coils. Thus, we considered the original party that cold-rolled the product to be its producer. Product Comparisons The Department compared U.S. sales to sales made in the comparison market within the contemporaneous window period, which extends from three months prior to the month in which the first U.S. sale was made until two months after the month in which the last U.S. sale was made. *See* 19 CFR 351.414(e)(2). Where there were no sales of identical merchandise made in the comparison market in the ordinary course of trade, the Department compared U.S. sales to sales of the most similar foreign like product made in the ordinary course of trade. In making product comparisons, the Department selected identical and most similar foreign like products based on the physical characteristics reported by Chia Far in the following order of importance: grade, hot- or cold-rolled, gauge, surface finish, metallic coating, non-metallic coating, width, temper, and edge. Export Price and Constructed Export Price The Department based the price of Chia Far's U.S. sales of subject merchandise on EP or CEP, as appropriate. Specifically, when Chia Far sold subject merchandise to unaffiliated purchasers in the United States prior to importation, and CEP was not otherwise warranted based on the facts of the record, we based the price of the sale on EP, in accordance with section 772(a) of the Act. When Chia Far sold subject merchandise to unaffiliated purchasers in the United States through its U.S. affiliate, Lucky Medsup, we based the price of the sale on CEP, in accordance with section 772(b) of the Act. We revised Chia Far's reported U.S. sales data to take in account our findings at verification. For further discussion, see the the July 31, 2007, memorandum to the file from Elizabeth Eastwood entitled, “Sales Calculation Adjustments for Chia Far Industrial Factory Co., Ltd. (Chia Far) for the Preliminary Results” (Chia Far Sales Calculation Memorandum). We based EP on packed prices to the first unaffiliated purchaser in the United States. We made deductions from the starting price for foreign inland freight expenses, foreign brokerage and handling expenses, international freight expenses, marine insurance expenses, and harbor maintenance fees, in accordance with section 772(c)(2)(A) of the Act. In addition, we found at verification that Chia Far incurred certificate-of-origin fees on some EP sales. Because Chia Far was not able to identify at verification on which transactions it incurred this expense, pursuant to section 776(a)(1) of the Act, as facts available we are assigning this certificate-of-origin fee to all EP sales. For further discussion, see the Chia Far Sales Calculation Memorandum. We based CEP on packed prices sold to the first unaffiliated purchaser in the United States. We made deductions for foreign inland freight expenses, foreign brokerage and handling expenses, container handling expenses, foreign harbor construction expenses, international freight expenses, marine insurance expenses, U.S. duty expenses, U.S. brokerage and handling expenses, other U.S. transportation expenses, and harbor maintenance fees, in accordance with section 772(c)(2)(A) of the Act. In accordance with section 772(d)(1) of the Act and 19 CFR 351.402(b), we deducted from CEP those selling expenses associated with economic activities occurring in the United States, including direct selling expenses ( *i.e.* , imputed credit expenses, bank fees, and warranties), and indirect selling expenses. We recalculated Lucky Medsup's indirect selling expense ratio to include an amount for unreported pension expenses. For the details of this recalculation, see the Chia Far Sales Calculation Memorandum. In addition, we deducted from the CEP starting price an amount for CEP profit (profit allocated to expenses deducted under sections 772(d)(1) and (d)(2) of the Act) in accordance with sections 772(d)(3) and 772(f) of the Act. We computed profit by deducting from the total revenue realized on sales in both the U.S. and home markets, all expenses associated with those sales. We then allocated profit to the expenses incurred with respect to U.S. economic activity, based on the ratio of total U.S. expenses to total expenses for both the U.S. and home markets. Normal Value A. Home Market Viability In order to determine whether there was a sufficient volume of sales in the home market to serve as a viable basis for calculating NV, we compared the volume of home market sales of the foreign like product to the volume of U.S. sales of the subject merchandise, in accordance with section 773(a)(1)(C) of the Act. Because the aggregate volume of Chia Far's home market sales of the foreign like product is more than five percent of the aggregate volume of its U.S. sales of subject merchandise, we based NV on sales of the foreign like product in the respondent's home market. B. Level of Trade Section 773(a)(1)(B)(i) of the Act states that, to the extent practicable, the Department will calculate NV based on sales at the same LOT as the EP or CEP. Sales are made at different LOTs if they are made at different marketing stages (or their equivalent). *See* 19 CFR 351.412(c)(2). Substantial differences in selling activities are a necessary, but not sufficient, condition for determining that there is a difference in the stages of marketing. *Id* . *See also Notice of Final Determination of Sales at Less Than Fair Value: Certain Cut-to-Length Carbon Steel Plate From South Africa* , 62 FR 61731, 61732 (Nov. 19, 1997) ( *Plate from South Africa* ). In order to determine whether the comparison market sales were at different stages in the marketing process than the U.S. sales, we reviewed the distribution system in each market ( *i.e.* , the chain of distribution), including selling functions, class of customer (customer category), and the level of selling expenses for each type of sale. Pursuant to section 773(a)(1)(B)(i) of the Act, in identifying LOTs for EP and comparison market sales ( *i.e.* , NV based on either home market or third country prices), 8 we consider the starting prices before any adjustments. For CEP sales, we consider only the selling activities reflected in the price after the deduction of expenses and profit under section 772(d) of the Act. *See Micron Technology, Inc. v. United States* , 243 F.3d 1301, 1314 (Fed. Cir. 2001). 8 Where NV is based on CV, we determine the NV LOT based on the LOT of the sales from which we derive selling expenses, general and administrative (G&A) expenses, and profit for CV, where possible. When the Department is unable to match U.S. sales of the foreign like product in the comparison market at the same LOT as the EP or CEP, the Department may compare the U.S. sale to sales at a different LOT in the comparison market. In comparing EP or CEP sales at a different LOT in the comparison market, where available data make it practicable, we make an LOT adjustment under section 773(a)(7)(A) of the Act. Finally, for CEP sales only, if the NV LOT is more remote from the factory than the CEP LOT and there is no basis for determining whether the difference in LOTs between NV and CEP affects price comparability ( *i.e.* , no LOT adjustment was practicable), the Department shall grant a CEP offset, as provided in section 773(a)(7)(B) of the Act. *See Plate from South Africa* , 62 FR at 61732-33. In this administrative review, we obtained information from Chia Far regarding the marketing stages involved in making the reported home market and U.S. sales, including a description of the selling activities performed by Chia Far for each channel of distribution. Chia Far reported that it made EP sales in the U.S. market to distributors, as well as CEP sales to Lucky Medsup. Chia Far reported identical selling activities for both channels of distribution. We examined the selling activities performed for these channels and found that Chia Far performed the following selling functions: 1) Price negotiation and communication with the customer; 2) arranging for freight and the provision of customs clearance/brokerage services (where necessary); 3) provision of general technical advice (where necessary) and quality assurance related activities; and 4) packing. These selling activities can be generally grouped into four core selling function categories for analysis: 1) sales and marketing; 2) freight and delivery; and 3) inventory maintenance and warehousing; and, 4) warranty and technical support. Accordingly, based on the core selling functions, we find that Chia Far performed sales and marketing, freight and delivery services, and warranty and technical support services for U.S. sales. Because Chia Far's selling activities did not vary by distribution channel, we preliminarily determine that there is one LOT in the U.S. market. With respect to the home market, Chia Far reported that it made sales to distributors and end users. We examined the selling activities performed for home market sales and found that Chia Far performed the following selling functions equally for sales to distributors and end users: 1) Price negotiation and communication with the customer; 2) arranging for freight (where necessary); 3) provision of general technical advice (where necessary) and quality assurance related activities; 4) packing; and, 5) post-sale warehousing/processing on request. Accordingly, based on the core selling functions described above, we find that Chia Far performed sales and marketing, freight and delivery services, warranty and technical support services, and inventory maintenance and warehousing for home market sales. Consequently, we preliminarily determine that there is one LOT in the home market for Chia Far. Finally, we compared the U.S. LOT to the home market LOT and found that the core selling functions performed for U.S. and home market customers do not differ significantly. Specifically, although Chia Far performed occasional warehousing and post-sale processing functions in the home market that it did not perform on sales to the United States, we do not find these differences to be material selling function distinctions significant enough to warrant a separate LOT. Thus, we determine that the NV LOT for Chia Far is the same as the U.S. LOT for Chia Far. Regarding the CEP-offset provision, as described above, it is appropriate only if the NV LOT is more remote from the factory than the CEP LOT and there is no basis for determining whether the difference in LOTs between NV and CEP affects price comparability. Because we find that no difference in LOTs exists, we do not find that a CEP offset is warranted for Chia Far. C. Cost of Production Analysis In the 2003-2004 administrative review, the most recently completed segment of this proceeding as of the date of initiation of this review, the Department determined that Chia Far sold foreign like product at prices below the cost of producing the product and excluded such sales from the calculation of NV. *See Stainless Steel Sheet and Strip in Coils from Taiwan: Preliminary Results and Partial Rescission of Antidumping Duty Administrative Review* , 70 FR 46137, 46144 (Aug. 9, 2005) (unchanged in *2003-2004 SSSSC from Taiwan* ). As a result, the Department initiated an investigation to determine whether Chia Far made home market sales during the POR at prices below their COPs. 1. Calculation of COP In accordance with section 773(b)(3) of the Act, for each foreign like product sold by Chia Far during the POR, we calculated a weighted-average COP based on the sum of the respondent's materials and fabrication costs, G&A expenses, and financial expenses. We made the following adjustments to Chia Far's cost data. 1. We adjusted the reported product-specific costs of manufacturing to account for an unreconciled difference between the costs reported in Chia Far's submitted cost database and its audited financial statements. 2. We revised Chia Far's G&A expense rate to include the company's year-end adjustments to raw material and work-in-process inventories. 3. Because Chia Far had net financial income, we did not include an amount for financial expense in the calculation of COP. This is in accordance with the Department's practice of determining that, when a company earns enough financial income that it recovers all of its financial expense, that company did not have a resulting cost for financing during that period. *See Certain Steel Concrete Reinforcing Bars from Turkey; Preliminary Results and Partial Rescission of Antidumping Duty Administrative Review* , 71 FR 26455, 26460 (May 5, 2006) (unchanged in *Certain Steel Concrete Reinforcing Bars From Turkey; Final Results and Rescission of Antidumping Duty Administrative Review in Part* , 71 FR 65082 (Nov. 7, 2006)); and * Notice of Final Results of Antidumping Duty Administrative Review: Certain Softwood Lumber Products From Canada * , 70 FR 73437 (Dec. 12, 2005), and accompanying Issues and Decision Memorandum at Comments 9 and 25. 4. For the cost of SSSSC not produced by Chia Far, we used, as facts available, Chia Far's costs to produce merchandise with characteristics identical or similar to the characteristics of the merchandise not produced by Chia Far. For further information, see the July 31, 2007, memorandum to Neal M. Halper from Heidi Schriefer entitled, “Cost of Production and Constructed Value Calculation Adjustments for the Preliminary Results - Chia Far Industrial Factory Co., Ltd.” 2. Test of Comparison-Market Sales Prices In order to determine whether sales were made at prices below the COP on a product-specific basis, we compared the respondent's weighted-average COP to the prices of its home market sales of foreign like product, as required under section 773(b) of the Act. In accordance with sections 773(b)(1)(A) and
(B)of the Act, in determining whether to disregard home market sales made at prices less than the COP, we examined whether such sales were made: 1) In substantial quantities within an extended period of time; and 2) at prices which permitted the recovery of all costs within a reasonable period of time. We compared the COP to home market sales prices, less any applicable movement charges and direct and indirect selling expenses. 3. Results of the COP Test Pursuant to section 773(b)(2)(C) of the Act, where less than 20 percent of Chia Far's sales of a given product were made at prices less than the COP, we did not disregard any below-cost sales of that product because the below-cost sales were not made in “substantial quantities.” Where 20 percent or more of Chia Far's sales of a given product were made at prices less than the COP during the POR, we determined such sales to have been made in “substantial quantities” within an extended period of time ( *i.e.* , one year) pursuant to sections 773(b)(2)(B) and
(C)of the Act. Based on our comparison of POR average costs to reported prices, we also determined, in accordance with section 773(b)(2)(D) of the Act, that these sales were not made at prices which would permit recovery of all costs within a reasonable period of time. As a result, we disregarded the below-cost sales of that product. D. Calculation of Normal Value Based on Comparison Market Prices We based NV for Chia Far on prices to unaffiliated customers in the home market. We revised Chia Far's reported home market sales data to take in account our findings at verification. For further discussion, see the Chia Far Sales Calculation Memorandum. We made deductions from the starting price, where appropriate, for billing adjustments and rebates. We also made deductions from the starting price for foreign inland freight expenses under section 773(a)(6)(B)(ii) of the Act. In addition, we made adjustments under section 773(a)(6)(C)(iii) of the Act and 19 CFR 351.410 for differences in credit expenses, bank fees, and warranties. We also deducted home market packing costs and added U.S. packing costs, in accordance with sections 773(a)(6)(A) and
(B)of the Act. Finally, we made adjustments for differences in costs attributable to differences in the physical characteristics of the merchandise in accordance with section 773(a)(6)(C)(ii) of the Act and 19 CFR 351.411. Currency Conversion We made currency conversions into U.S. dollars in accordance with section 773A of the Act and 19 CFR 351.415, based on the exchange rates in effect on the dates of the U.S. sales as certified by the Federal Reserve Bank. Preliminary Results of the Review We preliminarily determine that weighted-average dumping margins exist for the respondents for the period July 1, 2005, through June 30, 2006, as follows: Manufacturer/Exporter Percent Margin Chia Far Industrial Factory Co., Ltd 1.43 PFP Taiwan Co., Ltd. 21.10 Yieh Trading Corp./Yieh Corp. 21.10 Disclosure and Public Hearing The Department will disclose to parties the calculations performed in connection with these preliminary results within five days of the date of publication of this notice. *See* 19 CFR 351.224(b). Pursuant to 19 CFR 351.309(c)(ii), interested parties may submit cases briefs not later than 30 days after the date of publication of this notice. Rebuttal briefs, limited to issues raised in the case briefs, may be filed not later than 35 days after the date of publication of this notice. *See* 19 CFR 351.309(d)(1). Parties who submit case briefs or rebuttal briefs in this proceeding are requested to submit with each argument: 1) A statement of the issue; 2) a brief summary of the argument; and 3) a table of authorities. *See* 19 CFR 351.309(c)(2). Pursuant to 19 CFR 351.310(c), interested parties who wish to request a hearing, or to participate if one is requested, must submit a written request to the Assistant Secretary for Import Administration, Room B-099, within 30 days of the date of publication of this notice. Requests should contain: 1) the party's name, address and telephone number; 2) the number of participants; and 3) a list of issues to be discussed. *Id* . Issues raised in the hearing will be limited to those raised in the respective case briefs. The Department will issue the final results of this administrative review, including the results of its analysis of the issues raised in any written briefs, not later than 120 days after the date of publication of this notice, pursuant to section 751(a)(3)(A) of the Act. Assessment Rates Upon completion of the administrative review, the Department shall determine, and CBP shall assess, antidumping duties on all appropriate entries, in accordance with 19 CFR 351.212. The Department will issue appropriate appraisement instructions for the companies subject to this review directly to CBP 15 days after the date of publication of the final results of this review. For Chia Far, we will calculate importer-specific *ad valorem* duty assessment rates based on the ratio of the total amount of antidumping duties calculated for the examined sales to the total entered value of those sales. We will instruct CBP to assess antidumping duties on all appropriate entries covered by this review if any importer-specific assessment rate calculated in the final results of this review is above *de minimis* . Pursuant to 19 CFR 351.106(c)(2), we will instruct CBP to liquidate without regard to antidumping duties any entries for which the assessment rate is *de minimis. See* 19 CFR 351.106(c)(1). The final results of this review shall be the basis for the assessment of antidumping duties on entries of merchandise covered by the final results of this review and for future deposits of estimated duties, where applicable. The Department clarified its “automatic assessment” regulation on May 6, 2003. * See Antidumping and Countervailing Duty Proceedings: Assessment of Antidumping Duties * , 68 FR 23954 (May 6, 2003) ( *Assessment Policy Notice* ). This clarification will apply to entries of subject merchandise during the POR produced by companies included in these final results of review for which the reviewed companies did not know that the merchandise they sold to the intermediary ( *e.g.* , a reseller, trading company, or exporter) was destined for the United States. In such instances, we will instruct CBP to liquidate unreviewed entries at the “All Others” rate if there is no rate for the intermediary involved in the transaction. *See Assessment Policy Notice* for a full discussion of this clarification. Cash Deposit Requirements The following cash deposit requirements will be effective for all shipments of the subject merchandise entered, or withdrawn from warehouse, for consumption on or after the publication date of the final results of this administrative review, as provided by section 751(a)(2)(C) of the Act: 1) The cash deposit rate for each specific company listed above will be that established in the final results of this review, except if the rate is less than 0.50 percent and, therefore, *de minimis* within the meaning of 19 CFR 351.106(c)(1), in which case no cash deposit will be required; 2) for previously reviewed or investigated companies not participating in this review, the cash deposit rate will continue to be the company-specific rate published for the most recent period; 3) if the exporter is not a firm covered in this review, or the original LTFV investigation, but the manufacturer is, the cash deposit rate will be the rate established for the most recent period for the manufacturer of the merchandise; and 4) the cash deposit rate for all other manufacturers or exporters will continue to be 12.61 percent, the “All Others” rate made effective by the LTFV investigation. *See SSSSC Order* , 64 FR at 40557. These deposit requirements, when imposed, shall remain in effect until further notice. Notification to Importers This notice also serves as a preliminary reminder to importers of their responsibility under 19 CFR 351.402(f) to file a certificate regarding the reimbursement of antidumping duties prior to liquidation of the relevant entries during this review period. Failure to comply with this requirement could result in the Secretary's presumption that reimbursement of antidumping duties occurred and the subsequent assessment of double antidumping duties. This administrative review and notice are published in accordance with sections 751(a)(1) and 777(i)(1) of the Act and 19 CFR 351.221. Dated: July 27, 2007. David M. Spooner, Assistant Secretary for Import Administration. [FR Doc. E7-15155 Filed 8-2-07; 8:45 am] BILLING CODE 3510-DS-S DEPARTMENT OF COMMERCE International Trade Administration Notice of Scope Rulings AGENCY: Import Administration, International Trade Administration, Department of Commerce. EFFECTIVE DATE: August 3, 2007. SUMMARY: The Department of Commerce (“Department”) hereby publishes a list of scope rulings completed between April 1, 2007, and June 30, 2007. In conjunction with this list, the Department is also publishing a list of requests for scope rulings and anticircumvention determinations pending as of June 30, 2007. We intend to publish future lists after the close of the next calendar quarter. FOR FURTHER INFORMATION CONTACT: Juanita H. Chen, AD/CVD Operations, SEC Office, Import Administration, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue, N.W., Washington, DC 20230; telephone: 202-482-1904. SUPPLEMENTARY INFORMATION: Background The Department's regulations provide that the Secretary will publish in the **Federal Register** a list of scope rulings on a quarterly basis. See 19 C.F.R. 351.225(o). Our most recent notification of scope rulings was published on May 1, 2007. *See Notice of Scope Rulings* , 72 FR 23802 (May 1, 2007). This current notice covers all scope rulings and anticircumvention determinations completed by Import Administration between April 1, 2007, and June 30, 2007, inclusive, and it also lists any scope or anticircumvention inquiries pending as of June 30, 2007. As described below, subsequent lists will follow after the close of each calendar quarter. Scope Rulings Completed Between April 1, 2007, and June 30, 2007: People's Republic of China A-570-504: Petroleum Wax Candles from the People's Republic of China Requestor: Musical Candle Company; its musical candle is included within the scope of the antidumping duty order; April 6, 2007. A-570-504: Petroleum Wax Candles from the People's Republic of China Requestor: H S Candle, Inc.; its Wedding Cake (item WD008); Wedding Carriage (item WD011); Bride & Groom Wedding Cake Topper (item WD006); Wedding Bells (item WD012); and Pillow with Rings (item WD026) candles from its “Wedding Candle” series, and its Champagne Bottle in Ice Bucket (item HS028) from its “Holiday Candle” series, are not within the scope of the antidumping duty order; May 10, 2007. A-570-504: Petroleum Wax Candles from the People's Republic of China Requestor: FashionCraft-Excello, Inc.; its flip flops (pink, blue, orange, or yellow; item #8820), wedding cake (white, ivory, pink or silver; item #8205, 8206, 8207, and 3875), baby bottle (pink or blue; item #3867, and 3868), pears (item #8201), rubber duckie (item #8209), coach (silver or gold; item #3854 and 3855), baby carriage (pink or blue; item #3852 and 3853), and teddy bear on a rocking horse (pink or blue; item #3863 and 3864) candles are not within the scope of the antidumping duty order; April 11, 2007. A-570-803: Heavy Forged Hand Tools from the People's Republic of China Requestor: Cummins Industrial Tools; the 10-ton log splitter is not within the scope of the antidumping duty order; June 1, 2007. A-570-803: Heavy Forged Hand Tools from the People's Republic of China Requestor: Agri-Fab; the Tow Behind Log Splitter is not within the scope of the antidumping duty order; June 1, 2007. A-570-826: Paper Clips from the People's Republic of China Requestor: Esselte Corporation; the Pendaflex® Pile Smart TM Label Clips are not within the scope of the antidumping duty order; May 1, 2007. A-570-890: Wooden Bedroom Furniture from the People's Republic of China Requestor: Target Corporation; the products in its “Manhattan Collection” (which consists of a bench, computer cart, bookcase, modular room divider and desk) are not within the scope of the antidumping duty order; June 11, 2007. A-570-891: Hand Trucks from the People's Republic of China Requestor: Ameristep Corporation, Inc.; its “non-typical” deer cart (product no. 7800) and its “grizzly” deer cart (product no. 9800) are not within the scope of the antidumping duty order; May 18, 2007. A-570-891: Hand Trucks from the People's Republic of China Requestor: Bond Street Ltd.; the Stebco portable slide-flat cart (style no. 390009CHR) is included within the scope of the antidumping duty order; May 30, 2007. A-570-901: Lined Paper Products from the People's Republic of China Requestor: Lakeshore Learning Materials; certain printed educational materials, product numbers GG823 (Blank Writing Journal); RR801ML2 (Writing Journal); AA953ML3 (Diario para Escribir); GG528JNL (Vacation Journal); GG381JRN (Science Journal); RR969 and RR968 (My Math Journal); GG145 and GG146 (Math Journal, Grades 4 - 6); EE372 (Poetry Journal); GG154 and GG155 (Improve Your Writing Word Blank Journal); LA125 (Stamp, Draw, & Write Story Center); EE419 (Letter Writing Supply Kit); GG241JNL (Reading Journal); AA559 (Cursive Writing Letter Practice Book); AA558 (1 to 30 Printing Numbers Practice Book); AA565 (Lowercase Printing Letters Practice Book); and AA555 (Uppercase Printing Letters Practice Book), are not within the scope of the antidumping duty order; May 7, 2007. 1 1 Certain printed education materials, product numbers JJ537; JJ538; JJ342; JJ343; JJ225; JJ226; JJ2206; JJ2207; JJ255; JJ258, are not eligible for a scope ruling because they are in development and have not yet been produced. A-570-901: Lined Paper Products from the People's Republic of China Requestor: Avenues in Leather, Inc.; its padfolios which contain one pad of paper (whether or not the pad of paper meets the description of merchandise covered by the scope of the order) are not within the scope of the antidumping duty order; May 8, 2007. Multiple Countries A-122-503: Certain Iron Construction Castings from Canada; A-351-503 and C-351-504: Certain Iron Construction Castings from Brazil; A-570-502: Iron Construction Castings from the People's Republic of China Requestor: Deeter Foundry, Inc., East Jordan Iron Works, Inc., LeBaron Foundry, Inc., Leed Foundry, Inc., Municipal Castings, Inc., Neenah Foundry Company, Tyler Pipe Company, and U.S. Foundry & Manufacturing Co.; iron construction castings made of gray and ductile cast iron are included within the scope of the antidumping and countervailing duty orders; May 3, 2007. Anticircumvention Determinations Completed Between April 1, 2007, and June 30, 2007: People's Republic of China A-570-504: Petroleum Wax Candles from the People's Republic of China Requestor: National Candle Association; candles assembled in the United States from molded or carved articles of wax (a.k.a. wickless wax forms) from the PRC are circumventing the antidumping duty order; May 30, 2007. Scope Inquiries Terminated Between April 1, 2007, and June 30, 2007: People's Republic of China A-570-864: Pure Magnesium in Granular Form from the People's Republic of China Requestor: ESM Group Inc.; October 18, 2006, Final Scope Ruling on whether atomized ingots are included within the scope of the antidumping duty order rescinded and vacated; April 18, 2007. 2 2 On November 16, 2006, Reade Manufacturing Company and Hart Metals, Inc. filed suit with the U.S. Court of International Trade, *Reade Manufacturing Co. v. United States* , Ct. No. 06-420, alleging they were interested parties who were not served the request for a scope ruling. On April 3, 2007, the Department entered into a Joint Stipulation for Entry of Judgment, pursuant to which the Department would rescind and vacate its Final Scope Ruling, effective October 18, 2006. A-570-891: Hand Trucks from the People's Republic of China Requestor: American Lawn Mower Company; whether its “Collect-It Garden Waste Remover” is within the scope of the antidumping duty order; requested March 28, 2007. 3 3 This scope request was not eligible for a scope ruling because the “Collect-It Garden Waste Remover” was not yet in production. Anticircumvention Inquiries Terminated Between April 1, 2007, and June 30, 2007: None. Scope Inquiries Pending as of June 30, 2007: Belgium A-423-808 and C-423-809: Stainless Steel Plate in Coils from Belgium Requestor: Ugine & ALZ Belgium N.V.; whether stainless steel products with an actual thickness of less than 4.75 mm, regardless of nominal thickness, are within the scope of the antidumping and countervailing duty orders; requested June 8, 2007. Italy A-475-703: Granular Polytetrafluoroethylene Resin from Italy Requestor: Petitioner, E.I. DuPont de Nemours & Company; whether imports of Polymist[reg] feedstock produced by the respondent Solvay Solexis, Inc. and Solvay Solexis S.p.A are within the scope of the antidumping duty order; requested August 18, 2006; initiated October 2, 2006. Japan A-588-702: Stainless Steel Butt-Weld Pipe Fittings from Japan Requestor: Kuze Bellows Kogyosho Co., Ltd.; whether its “Kuze Clean Fittings” for automatic welding are within the scope of the antidumping duty order; requested March 26, 2007. A-588-804: Ball Bearings and Parts Thereof from Japan Requester: Toyota Tsusho America Inc.; whether steel balls used in automobile vents are within the scope of the antidumping order; requested April 23, 2007; initiated May 18, 2007. People's Republic of China A-570-502: Iron Construction Castings from the People's Republic of China Requestor: A.Y. McDonald Mfg. Co.; whether cast iron lids and bases independently sourced from the PRC for its “Arch Pattern” and “Minneapolis Pattern” curb boxes are included within the scope of the antidumping duty order; requested April 2, 2007. A-570-504: Petroleum Wax Candles from the People's Republic of China Requestor: Enchante Accessories, Inc.; whether its palm oil wax candle is included within the scope of the antidumping duty order; requested January 29, 2007; initiated April 30, 2007. A-570-504: Petroleum Wax Candles from the People's Republic of China Requestor: Wedding Brand Investors LLC; whether white or ivory pillars and tapers are included within the scope of the antidumping duty order; requested June 12, 2007. A-570-801: Cased Pencils from the People's Republic of China Requestor: Walgreen Co.; whether the “Artskills TM Draw & Sketch Kit” is included within the scope of the antidumping duty order; requested May 25, 2007. A-570-801: Cased Pencils from the People's Republic of China Requestor: Walgreen Co.; whether the “Artskills TM Stencil Kit” is included within the scope of the antidumping duty order; requested May 25, 2007. A-570-803: Heavy Forged Hand Tools With or Without Handles from the People's Republic of China Requestor: Fiskars Brands, Inc.; whether a stamped machete, gator machete, and brush axe are included within the scope of the antidumping duty order; requested June 26, 2007. A-570-848: Freshwater Crawfish Tailmeat from the People's Republic of China Requestor: Maritime Products International; whether breaded crawfish tailmeat is included within the scope of the antidumping duty order; requested November 8, 2006; initiated December 18, 2006. A-570-864: Pure Magnesium in Granular Form from the People's Republic of China Requestor: ESM Group Inc.; whether atomized ingots are included within the scope of the antidumping duty order; original scope ruling rescinded and vacated April 18, 2007 4 ; initiated April 18, 2007. 4 See “Scope Inquiries Terminated Between April 1, 2007 and June 30, 2007” section, above. A-570-866: Folding Gift Boxes from the People's Republic of China Requestor: Footstar; whether certain boxes for business cards and forms are included within the scope of the antidumping duty order; requested April 26, 2007. A-570-866: Folding Gift Boxes from the People's Republic of China Requestor: Hallmark Cards, Inc.; whether its “FunZip” gift presentation is included within the scope of the antidumping duty order; requested June 1, 2007. A-570-868: Folding Metal Tables and Chairs from the People's Republic of China Requestor: International E-Z Up, Inc.; whether its Instant Work Bench is included within the scope of the antidumping duty order; requested April 6, 2007. A-570-882: Refined Brown Aluminum Oxide from the People's Republic of China Requestor: 3M Company; whether certain semi-friable and heat-treated, specialty aluminum oxides are included within the scope of the antidumping duty order; requested September 19, 2006; initiated January 17, 2007. A-570-886: Polyethylene Retail Carrier Bags from the People's Republic of China Requestor: Asia Dynamics, Inc.; whether certain hospital patient belongings bags (model nos. 304211, 304311, 304411, 304611, 304711, 304811, 40219, 40229) are included within the scope of the antidumping duty order; requested May 23, 2007. A-570-886: Polyethylene Retail Carrier Bags from the People's Republic of China Requestor: DMS Holdings, Inc.; whether certain MABIS Healthcare hospital bags (biohazard disposal bag nos. 75-860-010, 75-860-080, 75-864-080; isolation bag no. 75-850-000; patient set-up bag nos. 75-833-000, 75-842-000, 75-970-550, 75-973-550, 75-979-550; personal belongings bag nos. 75-010-850, 75-011-850, 75-013-850, 75-014-850, 75-019-850, 75-032-850, 75-033-850, 75-036-850, 75-037-850, 75-038-850, 75-046-850, 75-047-850, 75-075-850, 75-105-850, 75-109-850, 75-110-850, 75-111-850, 75-117-850, 75-118-850, 75-120-850, 75-834-000, 75-838-000, 75-839-000, 75-844-000, 75-845-000, 75-847-000; kit packing bag nos.75-801-000, 75-802-000, 75-803-000, 75-804-000, 75-862-000, 75-863-000, 75-865-000) are included within the scope of the antidumping duty order; requested June 8, 2007. A-570-886: Polyethylene Retail Carrier Bags from the People's Republic of China Requestor: Medline Industries, Inc.; whether certain hospital patient belongings bags and surgical kit bags (drawstring bags model nos. DS500C, DS400C, DONDS600, 38667, 7510, 42818, 25117, 28614, 42817; rigid handle bag model no. 26900) are included within the scope of the antidumping duty order; requested June 18, 2007. A-570-890: Wooden Bedroom Furniture from the People's Republic of China Requestor: AP Industries; whether convertible cribs (model nos. 1000-0100; 1000-0125; 1000-0160; 1000-1195/2195; 1000-2145; and 1000-2165) are included within the scope of the antidumping duty order; requested June 26, 2007. A-570-891: Hand Trucks from the People's Republic of China Requestor: Northern Tool & Equipment Co.; whether a high-axle torch cart (item #164771) is included within the scope of the antidumping duty order; requested March 27, 2007. A-570-898: Chlorinated Isocyanurates from the People's Republic of China Requestor: BioLab, Inc.; whether chlorinated isocyanurates originating in the People's Republic of China, that are packaged, tableted, blended with additives, or otherwise further processed in Canada before entering the U.S., are included within the scope of the antidumping duty order; requested November 22, 2006; initiated March 9, 2007. A-570-901: Lined Paper Products from the People's Republic of China Requestor: Lakeshore Learning Materials; whether certain printed educational materials, product numbers RR973 and RR974 (Reader's Book Log); GG185 and GG186 (Reader's Response Notebook); GG181 and GG182 (The Writer's Notebook); RR673 and RR674 (My Word Journal); AA185 and AA186 (Mi Diario de Palabras); RR630 and RR631 (Draw & Write Journal); AA786 and AA787 (My First Draw & Write Journal); AA181 and AA182 (My Picture Word Journal); GG324 and GG325 (Writing Prompts Journal); EE441 and EE442 (Daily Math Practice Journal Grades 1 - 3); EE443 and EE444 (Daily Math Practice Journal Grades 4 - 6); EE651 and EE652 (Daily Language Practice, Grades 1-3); EE653 and EE654 (Daily Language Practice Journal, Grades 4 - 6), are included within the scope of the antidumping duty order; requested December 7, 2006; initiated May 7, 2007. A-570-901: Lined Paper Products from the People's Republic of China Requestor: Bond Street Ltd.; whether its writing cases (previously found to be not included within the scope when containing writing pads with a backing, provided that they do not have a front cover and/or they consist of hole-punched or drilled filler paper), which contain writing tablets 2i and 2ii (previously found to be included within the scope), are included within the scope of the antidumping duty order; requested December 22, 2006. A-570-904: Activated Carbon from the People's Republic of China Requestor: Cherishment, Inc.; whether a certain type of patented activated carbon (192 patent HTCC product) is included within the scope of the antidumping duty order; requested June 1, 2007. Multiple Countries A-533-809: Certain Forged Stainless Steel Flanges from India; A-583-821: Certain Forged Stainless Steel Flanges from Taiwan Requestor: Lokring Technology Corporation; whether certain assemblies comprising stainless steel flanges from India or Taiwan welded to stainless steel “half-bodies” with swage rings, and completed in Canada, are within the scope of the order; requested June 26, 2007. Anticircumvention Rulings Pending as of June 30, 2007: People's Republic of China A-570-001: Potassium Permanganate from the People's Republic of China Requestor: Specialty Products International, Inc.; whether sodium permanganate is later-developed merchandise that is circumventing the antidumping duty order; requested October 10, 2006. A-570-868: Folding Metal Tables and Chairs from the People's Republic of China Requestor: Meco Corporation; whether the common leg table (a folding metal table affixed with cross bars that enable the legs to fold in pairs) produced in the PRC is a minor alteration that circumvents the antidumping duty order; requested October 31, 2005; initiated June 1, 2006. A-570-894: Certain Tissue Paper Products from the People's Republic of China Requestor: Seaman Paper Company; whether imports of tissue paper from Vietnam made out of jumbo rolls of tissue paper from the PRC are circumventing the antidumping duty order; requested July 19, 2006; initiated September 5, 2006. A-570-901: Lined Paper Products from the People's Republic of China Requestor: Association of American School Suppliers, whether imports of notebooks and filler paper from Taiwan are circumventing the antidumping duty order; requested January 16, 2007. Interested parties are invited to comment on the completeness of this list of pending scope and anticircumvention inquiries. Any comments should be submitted to the Deputy Assistant Secretary for AD/CVD Operations, Import Administration, International Trade Administration, 1401 Constitution Avenue, N.W., Room 1870, Washington, DC 20230. This notice is published in accordance with 19 C.F.R. 351.225(o). Dated: July 27, 2007. Stephen J. Claeys, Deputy Assistant Secretary for Import Administration. [FR Doc. E7-15159 Filed 8-2-07; 8:45 am] BILLING CODE 3510-DS-P DEPARTMENT OF DEFENSE Office of the Secretary Renewal of Federal Advisory Committee AGENCY: DoD. SUMMARY: Under the provisions of the Federal Advisory Committee Act of 1972, (5 U.S.C. Appendix, as amended), the Sunshine in the Government Act of 1976 (5 U.S.C. 552b, as amended), and 41 CFR 102-3.65, the Department of Defense gives notice that it is renewing the charter for the Defense Policy Board Advisory Committee. The Defense Policy Board Advisory Committee, pursuant to 41 CFR 102-3.50(d), is a discretionary Federal advisory committee established to provide the Secretary of Defense and the Deputy Secretary of Defense, through the Under Secretary of Defense for Policy, with independent, informed advice and opinion concerning matters of defense policy. The Committee will focus on:
(a)Issues central to strategic DoD planning;
(b)policy implications of U.S. force structure and force modernization and transformation on DoD's ability to execute U.S. defense strategy;
(c)U.S. regional defense policies; and
(d)any other research and analysis of topics raised by the Secretary of Defense, Deputy Secretary or Under Secretary of Defense for Policy. The Under Secretary of Defense (Policy) may act upon the Committee's advice and recommendations. The Defense Policy Board Advisory Committee shall be comprised of no more than twenty-six members, who have distinguished backgrounds in national security affairs, and no more than four of the members shall be Federal officers or employees. Committee members appointed by the Secretary of Defense, who are not full-time Federal officers or employees, shall serve as Special Government Employees under the authority of 5 U.S.C. 3109. Members will be appointed to serve a term of two years, and their consultant appointments will be renewed annually. With the exception of travel and per diem for official travel, Committee members shall serve without compensation. The Secretary of Defense shall select the Committee's Chairperson from the membership at large. In addition, the Under Secretary of Defense for Policy may appoint consultants to support the Committee and the Committee's task forces. The Defense Policy Board Advisory Committee shall meet at the call of the committee's Designated Federal Officer, in consultation with the Chairperson and the Under Secretary of Defense for Policy. The Designated Federal Officer shall be a full-time or permanent part-time DoD employee, and shall be appointed in accordance with established DoD policies and procedures. The Designated Federal Officer or duly appointed Alternate Designated Federal Officer shall attend all committee meetings and subcommittee meetings. The Defense Policy Board Advisory Committee shall be authorized to establish subcommittees, as necessary and consistent with its mission, and these subcommittees or working groups shall operate under the provisions of the Federal Advisory Committee Act of 1972 (5 U.S.C., Appendix, as amended), the Sunshine in the Government Act of 1976 (5 U.S.C. 552b, as amended), and other appropriate Federal regulations. Such subcommittees or workgroups shall not work independently of the chartered committee, and shall report all their recommendations and advice to the Defense Policy Board Advisory Committee for full deliberation and discussion. Subcommittees or workgroups have no authority to make decisions on behalf of the chartered committee nor can they report directly to the Department of Defense or any Federal officers or employees who are not members of the Defense Policy Board Advisory Committee. Pursuant to 41 CFR 102-3.105(j) and 102-3.140, the public or interested organizations may submit written statements to the Defense Policy Board Advisory Committee membership about the committee's mission and functions. Written statements may be submitted at any time or in response to the stated agenda of planned meeting of the Defense Policy Board Advisory Committee. All written statements shall be submitted to the Designated Federal Officer for the Defense Policy Board Advisory Committee, and this individual will ensure that the written statements are provided to the membership for their consideration. Contact information for the Designated Federal Officer can be obtained from the GSA's FACA Database— *https://www.fido.gov/facadatabase/public.asp.* The Designated Federal Officer, pursuant to 41 CFR 102-3.150, will announce planned meetings of the Defense Policy Board Advisory Committee. The Designated Federal Officer, at that time, may provide additional guidance on the submission of written statements that are in response to the stated agenda for the planned meeting in question. FOR FURTHER INFORAMTION CONTACT: Jim Freeman, DoD Committee Management Office, 703-601-2554, extension 128. Dated: July 30, 2007. L.M. Bynum, Alternate OSD Federal Register, Liaison Officer, Department of Defense. [FR Doc. 07-3821 Filed 8-1-07; 10:22 am]
Connectionstraces to 17
Traces to 17 documents
CFR
9 references not yet in our index
  • 15 CFR 400
  • 343 F. Supp. 2d 1344
  • 337 F.3d 1373
  • 219 F. Supp. 2d 1333
  • 354 F.3d 1371
  • 216 F.3d 1027
  • 957 F. Supp. 251
  • 243 F.3d 1301
  • 41 CFR 102
Citation graph
cites case law
Notices
DEPARTMENT OF COMMERCE
C.F.R.§ 351.213
C.F.R.§ 351.212
C.F.R.§ 351.402
C.F.R.§ 351.305
C.F.R.§ 351.414
C.F.R.§ 351.412
C.F.R.§ 351.410
C.F.R.§ 351.411
C.F.R.§ 351.415
F. Supp.343 F. Supp. 2d 1344
F. App'x337 F.3d 1373
F. Supp.219 F. Supp. 2d 1333
Cites 26 · showing 12Cited by 0 across 0 sources
★   the supreme law of the land   ★
Don't Tread on Me
E Pluribus Unum — out of many, one

"If you don't know your rights, you don't have any."

Marginalia · a citizen's law index
A research desk, not legal advice. Always read the cited source before relying on a summary.
Questions or an issue? support@self-law.org
disclaimerMarginalia is a research index, not a law firm. Nothing on this site is legal, tax, or financial advice and no attorney–client relationship is formed by using it. Statutes, regulations, and case law change; summaries, search results, AI output, and member posts may be incomplete, out of date, or wrong. Any interpretation drawn from material on this site should be validated by a licensed attorney in your jurisdiction before you act on it.