Fed. Reg. Notices — Notice

BILLING CODE 6560-50-S ENVIRONMENTAL PROTECTION AGENCY [OPP-2004-0047; FRL-7346-8] Flumioxazin; Notice of Filing a Pesticide Petition to Establish a Tolerance for a Certain Pesticide Chemical in or on Food AGENCY: Environmental Protection Agency (EPA). ACTION: Notice. SUMMARY: This notice announces the initial filing of pesticide petitions proposing the establishment of regulations for residues of a certain pesticide chemical in or on various food commodities. DATES: Comments, identified by docket ID number OPP-2004-0047, must be received on or before April 16, 2004.

ADDRESSES: Comments may be submitted electronically, by mail, or through hand delivery/courier. Follow the detailed instructions as provided in Unit I. of the SUPPLEMENTARY INFORMATION . FOR FURTHER INFORMATION CONTACT: Shaja R. Brothers, Registration Division (7505C), Office of Pesticide Programs, Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001; telephone number:

(703)308-3194; e-mail address: *brothers.shaja@epa.gov* . SUPPLEMENTARY INFORMATION: I. General Information A. Does this Action Apply to Me? You may be potentially affected by this action if you are an agricultural producer, food manufacturer, or pesticide manufacturer. Potentially affected entities may include, but are not limited to: • Crop production (NAICS 111) • Animal production (NAICS 112) • Food manufacturing (NAICS 311) • Pesticide manufacturing (NAICS) This listing is not intended to be exhaustive, but rather provides a guide for readers regarding entities likely to be affected by this action. Other types of entities not listed in this unit could also be affected. The North American Industrial Classification System (NAICS) codes have been provided to assist you and others in determining whether this action might apply to certain entities. If you have any questions regarding the applicability of this action to a particular entity, consult the person listed under FOR FURTHER INFORMATION CONTACT . B. How Can I Get Copies of this Document and Other Related Information? 1. *Docket* . EPA has established an official public docket for this action under docket identification

(ID)number OPP-2004-0047. The official public docket consists of the documents specifically referenced in this action, any public comments received, and other information related to this action. Although a part of the official docket, the public docket does not include Confidential Business Information

(CBI)or other information whose disclosure is restricted by statute. The official public docket is the collection of materials that is available for public viewing at the Public Information and Records Integrity Branch (PIRIB), Rm. 119, Crystal Mall #2, 1921 Jefferson Davis Hwy., Arlington, VA. This docket facility is open from 8:30 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The docket telephone number is

(703)305-5805. 2. *Electronic access* . You may access this **Federal Register** document electronically through the EPA Internet under the “ **Federal Register** ” listings at *http://www.epa.gov/fedrgstr/* . An electronic version of the public docket is available through EPA's electronic public docket and comment system, EPA Dockets. You may use EPA Dockets at *http://www.epa.gov/edocket/* to submit or view public comments, access the index listing of the contents of the official public docket, and to access those documents in the public docket that are available electronically. Although not all docket materials may be available electronically, you may still access any of the publicly available docket materials through the docket facility identified in Unit I.B.1. Once in the system, select “search,” then key in the appropriate docket ID number. Certain types of information will not be placed in the EPA Dockets. Information claimed as CBI and other information whose disclosure is restricted by statute, which is not included in the official public docket, will not be available for public viewing in EPA's electronic public docket. EPA's policy is that copyrighted material will not be placed in EPA's electronic public docket but will be available only in printed, paper form in the official public docket. To the extent feasible, publicly available docket materials will be made available in EPA's electronic public docket. When a document is selected from the index list in EPA Dockets, the system will identify whether the document is available for viewing in EPA's electronic public docket. Although not all docket materials may be available electronically, you may still access any of the publicly available docket materials through the docket facility identified in Unit I.B. EPA intends to work towards providing electronic access to all of the publicly available docket materials through EPA's electronic public docket. For public commenters, it is important to note that EPA's policy is that public comments, whether submitted electronically or in paper, will be made available for public viewing in EPA's electronic public docket as EPA receives them and without change, unless the comment contains copyrighted material, CBI, or other information whose disclosure is restricted by statute. When EPA identifies a comment containing copyrighted material, EPA will provide a reference to that material in the version of the comment that is placed in EPA's electronic public docket. The entire printed comment, including the copyrighted material, will be available in the public docket. Public comments submitted on computer disks that are mailed or delivered to the docket will be transferred to EPA's electronic public docket. Public comments that are mailed or delivered to the docket will be scanned and placed in EPA's electronic public docket. Where practical, physical objects will be photographed, and the photograph will be placed in EPA's electronic public docket along with a brief description written by the docket staff. C. How and to Whom Do I Submit Comments? You may submit comments electronically, by mail, or through hand delivery/courier. To ensure proper receipt by EPA, identify the appropriate docket ID number in the subject line on the first page of your comment. Please ensure that your comments are submitted within the specified comment period. Comments received after the close of the comment period will be marked “late.” EPA is not required to consider these late comments. If you wish to submit CBI or information that is otherwise protected by statute, please follow the instructions in Unit I.D. Do not use EPA Dockets or e-mail to submit CBI or information protected by statute. 1. *Electronically* . If you submit an electronic comment as prescribed in this unit, EPA recommends that you include your name, mailing address, and an e-mail address or other contact information in the body of your comment. Also include this contact information on the outside of any disk or CD ROM you submit, and in any cover letter accompanying the disk or CD ROM. This ensures that you can be identified as the submitter of the comment and allows EPA to contact you in case EPA cannot read your comment due to technical difficulties or needs further information on the substance of your comment. EPA's policy is that EPA will not edit your comment, and any identifying or contact information provided in the body of a comment will be included as part of the comment that is placed in the official public docket, and made available in EPA's electronic public docket. If EPA cannot read your comment due to technical difficulties and cannot contact you for clarification, EPA may not be able to consider your comment. i. *EPA Dockets* . Your use of EPA's electronic public docket to submit comments to EPA electronically is EPA's preferred method for receiving comments. Go directly to EPA Dockets at *http://www.epa.gov/edocket/* , and follow the online instructions for submitting comments. Once in the system, select “search,” and then key in docket ID number OPP-2004-0047. The system is an “anonymous access” system, which means EPA will not know your identity, e-mail address, or other contact information unless you provide it in the body of your comment. ii. *E-mail* . Comments may be sent by e-mail to *opp-docket@epa.gov* , Attention: Docket ID Number OPP-2004-0047. In contrast to EPA's electronic public docket, EPA's e-mail system is not an “anonymous access” system. If you send an e-mail comment directly to the docket without going through EPA's electronic public docket, EPA's e-mail system automatically captures your e-mail address. E-mail addresses that are automatically captured by EPA's e-mail system are included as part of the comment that is placed in the official public docket, and made available in EPA's electronic public docket. iii. *Disk or CD ROM* . You may submit comments on a disk or CD ROM that you mail to the mailing address identified in Unit I.C.2. These electronic submissions will be accepted in WordPerfect or ASCII file format. Avoid the use of special characters and any form of encryption. 2. *By mail* . Send your comments to: Public Information and Records Integrity Branch (PIRIB) (7502C), Office of Pesticide Programs (OPP), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001, Attention: Docket ID Number OPP-2004-0047. 3. *By hand delivery or courier* . Deliver your comments to: Public Information and Records Integrity Branch (PIRIB), Office of Pesticide Programs (OPP), Environmental Protection Agency, Rm. 119, Crystal Mall #2, 1921 Jefferson Davis Hwy., Arlington, VA, Attention: Docket ID Number OPP-2004-0047. Such deliveries are only accepted during the docket's normal hours of operation as identified in Unit I.B.1. D. How Should I Submit CBI to the Agency? Do not submit information that you consider to be CBI electronically through EPA's electronic public docket or by e-mail. You may claim information that you submit to EPA as CBI by marking any part or all of that information as CBI (if you submit CBI on disk or CD ROM, mark the outside of the disk or CD ROM as CBI and then identify electronically within the disk or CD ROM the specific information that is CBI). Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2. In addition to one complete version of the comment that includes any information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public docket and EPA's electronic public docket. If you submit the copy that does not contain CBI on disk or CD ROM, mark the outside of the disk or CD ROM clearly that it does not contain CBI. Information not marked as CBI will be included in the public docket and EPA's electronic public docket without prior notice. If you have any questions about CBI or the procedures for claiming CBI, please consult the person listed under FOR FURTHER INFORMATION CONTACT . E. What Should I Consider as I Prepare My Comments for EPA? You may find the following suggestions helpful for preparing your comments: 1. Explain your views as clearly as possible. 2. Describe any assumptions that you used. 3. Provide copies of any technical information and/or data you used that support your views. 4. If you estimate potential burden or costs, explain how you arrived at the estimate that you provide. 5. Provide specific examples to illustrate your concerns. 6. Make sure to submit your comments by the deadline in this notice. 7. To ensure proper receipt by EPA, be sure to identify the docket ID number assigned to this action in the subject line on the first page of your response. You may also provide the name, date, and **Federal Register** citation. II. What Action is the Agency Taking? EPA has received a pesticide petition as follows proposing the establishment and/or amendment of regulations for residues of a certain pesticide chemical in or on various food commodities under section 408 of the Federal Food, Drug, and Cosmetic Act (FFDCA), 21 U.S.C. 346a. EPA has determined that this petition contains data or information regarding the elements set forth in FFDCA section 408(d)(2); however, EPA has not fully evaluated the sufficiency of the submitted data at this time or whether the data support granting of the petition. Additional data may be needed before EPA rules on the petition. List of Subjects Environmental protection, Agricultural commodities, Feed additives, Food additives, Pesticides and pests, Reporting and recordkeeping requirements. Dated: March 4, 2004. Lois Rossi, Director, Registration Division, Office of Pesticide Programs. Summary of Petition s The petitioner summary of the pesticide petitions is printed below as required by FFDCA section 408(d)(3). The summary of the petitions is prepared by the petitioner and represents the view of the petitioner. The summary may have been edited by EPA if the terminology used was unclear, the summary contained extraneous mateial, or the summary unintentionally made the reader conclude that the findings reflected EPA's position and not the position of the petitioner. The petition summary announces the availability of a description of the analytical methods available to EPA for the detection and measurement of the pesticide chemical residues or an explanation of why no such method is needed. Interregional Research Project Number 4 (IR-4) PP 3E6777, 3E6788, and 3E6779 EPA has received pesticide petitions (PP 3E6777, 3E6788, and 3E6779) from IR-4, 681 U.S. Highway #1 South, North Brunswick, NJ 08902-3390 proposing, pursuant to section 408(d) of the FFDCA, 21 U.S.C. 346a(d), to amend 40 CFR 180.568 by establishing tolerances for residues of flumioxazin, 2-[7-fluoro-3,4-dihydro-3-oxo-4-(2-propynyl)-2 *H* -1,4-benzoxazin-6-yl]-4,5,6,7-tetrahydro-1 *H* -isoindole-1,3(2 *H* )-dione, in or on the following raw agricultural commodities: 1. PP 3E6777 proposes tolerances for peppermint, tops; peppermint, oil; spearmint, tops; and spearmint, oil at 0.04 parts per million (ppm). 2. PP 3E6788 proposes tolerances for onion, dry bulb; garlic, bulb; and shallot, bulb at 0.02 ppm. 3. PP 3E6779 proposes tolerances for vegetable, tuberous and corm subgroup 1C at 0.02 ppm. EPA has determined that the petitions contain data or information regarding the elements set forth in section 408(d)(2) of the FFDCA; however, EPA has not fully evaluated the sufficiency of the submitted data at this time or whether the data support granting of the petitions. Additional data may be needed before EPA rules on the petitions. This notice includes a summary of the petitions prepared by Valent USA Corporation, P.O. Box 8025, Walnut Creek, CA 94596-8025. A. Residue Chemistry 1. *Plant metabolism* . The metabolism of flumioxazin is adequately understood for the purpose of the proposed tolerances. 2. *Analytical method* . Practical analytical methods for detecting and measuring levels of flumioxazin have been developed and validated in/on all appropriate agricultural commodities and respective processing fractions. The limit of quantification

(LOQ)of flumioxazin in the methods is 0.02 ppm which will allow monitoring of food with residues at the levels proposed for the tolerances. 3. *Magnitude of residues* . Residue data on potato, onion, and mint have been submitted which adequately supports the requested tolerances. B. Toxicological Profile The toxicological profile for flumioxazin which supports these petitions for tolerances was previously published in the **Federal Register** of April 18, 2001 (66 FR 19870) (FRL-6778-5). C. Aggregate Exposure 1. *Dietary exposure* —i. *Food* . Acute and chronic dietary analyses were conducted to estimate exposure to potential flumioxazin residues in/on the following crops: Peanuts and soybeans (existing tolerances), cotton, grapes, almond, pistachio, and sugarcane (tolerances pending), vegetable, tuberous and corm (Subgroup 1C), onion, dry bulb and mint (tolerances proposed in the current petitions), and nut, tree (Group 14), fruit, pome (Group 11), and fruit, stone (Group 12) (tolerances to be proposed in the future). The Cumulative and Aggregate Risk Evaluation System (CARES) Version 1.1 was used to conduct this assessment. Proposed tolerances and conservative estimates for percentages of the crop treated were used in these assessments. No adjustments were made for common washing, cooking or preparation practices. Exposure estimates for water were made based upon modeling General Expected Environmental Concentration (GENEEC 1.2). ii. *Drinking water* . Since flumioxazin is applied outdoors to growing agricultural crops, the potential exists for the parent or its metabolites to reach ground water or surface water that may be used for drinking water. Because of the physical properties of flumioxazin, it is unlikely that flumioxazin or its metabolites can leach to potable ground water. To quantify potential exposure from drinking water, surface water concentrations for flumioxazin were estimated using GENEEC 1.2. Because K OC could not be measured directly in adsorption-desorption studies because of chemical stability, GENEEC values representative of a range of K OC values were modeled. The simulation that was selected for these exposure estimates used an average K OC of 385, indicating high mobility. The peak GENEEC concentration predicted in the simulated pond water was 9.8 parts per billion (ppb). Using standard assumptions about body weight and water consumption, the acute exposure from this drinking water would be 0.00028 and 0.00098 milligrams/kilogram/day (mg/kg/day) for adults and children, respectively. The 56-day GENEEC concentration predicted in the simulated pond water was 0.34 ppb. 2. *Non-dietary exposure* . Flumioxazin is proposed only for agricultural uses and no homeowner or turf uses. Thus, no non-dietary risk assessment is needed. D. Cumulative Effects Section 408(b)(2)(D)(v) requires that the Agency must consider “available information” concerning the cumulative effects of a particular pesticide's residues and “other substances that have a common mechanism of toxicity.” Available information in this context include not only toxicity, chemistry, and exposure data, but also scientific policies and methodologies for understanding common mechanisms of toxicity and conducting cumulative risk assessments. Although the Agency has some information in its files that may turn out to be helpful in eventually determining whether a pesticide shares a common mechanism of toxicity with any other substances, EPA does not at this time have the methodologies to resolve the complex scientific issues concerning common mechanism of toxicity in a meaningful way for most registered pesticides. E. Safety Determination 1. *U.S. population* . The potential acute exposure from food to the U.S. population and various non-child/infant population subgroups will utilize at most 14.2% of the acute reference dose (aRfD). Addition of the worse case, dietary exposure from water (0.00028 mg/kg/day) increases this exposure at the 99.9th percentile to 23.7% of the aRfD. The Agency has no cause for concern if total acute residue contribution is less than 100% of the aRfD, because the aRfD represents the level at or below which daily aggregate exposure over a lifetime will not pose appreciable risk to human health. Therefore, it can be concluded that there is a reasonable certainty that no harm will result to the overall U.S. population from aggregate, acute exposure to flumioxazin residues. 2. *Chronic risk* . The potential chronic exposure from food to the U.S. population and various non-child/infant population subgroups will utilize at most 2.5% of the chronic reference dose (cRfD). The population subgroup with the highest exposure was the U.S. population, western states. Addition of the worse case, dietary exposure from water (0.0000097 mg/kg/day) increases this exposure at the 100th percentile to 3.0% of the cRfD. The Agency has no cause for concern if total chronic residue contribution is less than 100% of the cRfD, because the cRfD represents the level at or below which daily aggregate exposure over a lifetime will not pose appreciable risk to human health. Therefore, it can be concluded that there is a reasonable certainty that no harm will result to the overall U.S. population from aggregate, chronic exposure to flumioxazin residues. 3. *Infants and children* —i. *Safety factor for infants and children* . The FQPA safety factor has been retained at 10X in assessing the risk posed by flumioxazin. The reasons for retaining the 10X safety factor are as follows. First, there is evidence of increased susceptibility of rat fetuses to *in utero* exposure to flumioxazin by the oral and dermal route in the prenatal developmental toxicity studies in rats. In addition, there is evidence of increased susceptibility of young animals exposed to flumioxazin in the 2-generation reproduction toxicity study in rats. Finally, there is concern for the severity of the effects observed in fetuses and young animals when compared to those observed in the maternal and parental animals. Since the additional 10X safety factor has been retained to account for the apparent increased susceptibility from prenatal or postnatal exposures to flumioxazin, it would be appropriate to apply the extra 10X safety factor to only selected subpopulations, e.g. infants and children < 6 years old and females > 13 years old. For these assessments, however, the 10X safety factor has been applied to all population subgroups for all exposure durations (acute and chronic), thus making these assessments additionally conservative. ii. *Acute risk* . The potential acute exposure from food to children 1-2 years old (the most highly exposed child/infant subgroup) will utilize at most 26.3% of the aRfD. Addition of the worse case, dietary exposure from water (0.00098 mg/kg/day) increases this exposure at the 99.9th percentile to 59% of the aRfD. Therefore, it can be concluded that there is a reasonable certainty that no harm will result to infants and children from aggregate, acute exposure to flumioxazin residues. iii. *Chronic risk* . The potential chronic exposure from food to children 1-2 years old (the most highly exposed child/infant subgroup) will utilize at most 2.4% of the cRfD. Addition of the worse case, dietary exposure from water (0.000034 mg/kg/day) increases this exposure at the 100th percentile to 4.2% of the cRfD. Therefore, it can be concluded that there is a reasonable certainty that no harm will result to infants and children from aggregate, chronic exposure to flumioxazin residues. F. International Tolerances Flumioxazin has not been evaluated by the Joint Meeting on Pesticide Residues and there are no Codex Maximum Residue Limits

(MRL)for flumioxazin. MRL values have been established to allow the following uses of flumioxazin in the following countries: 1. Argentina, soybean at 0.015 ppm and sunflower at 0.02 ppm. 2. Brazil, soybean at 0.05 ppm. 3. France, grape at 0.05 ppm. 4. Paraguay, soybean at 0.015 ppm. 5. South Africa, soybean at 0.02 ppm and groundnut at 0.02 ppm. 6. Spain, soybean at 0.05 ppm and peanut at 0.05 ppm. [FR Doc. E4-552 Filed 3-16-04; 8:45 am] BILLING CODE 6560-50-S ENVIRONMENTAL PROTECTION AGENCY [OPP-2004-0051; FRL-7346-4] Pesticide Emergency Exemptions; Agency Decisions and State and Federal Agency Crisis Declarations AGENCY: Environmental Protection Agency (EPA). ACTION: Notice. SUMMARY: EPA has granted or denied emergency exemptions under the Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA) for use of pesticides as listed in this notice. The exemptions or denials were granted during the period October 2003, to December 2003, to control unforseen pest outbreaks. FOR FURTHER INFORMATION CONTACT: See each emergency exemption or denial for the name of a contact person. The following information applies to all contact persons: Team Leader, Emergency Response Team, Registration Division (7505C), Office of Pesticide Programs, Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001; telephone number:

(703)308-9366. SUPPLEMENTARY INFORMATION: EPA has granted or denied emergency exemptions to the following State and Federal agencies. The emergency exemptions may take the following form: Crisis, public health, quarantine, or specific. EPA has also listed denied emergency exemption requests in this notice. I. General Information A. Does this Action Apply to Me? You may be potentially affected by this action if you are an agricultural producer, food manufacturer, or pesticide manufacturer. Potentially affected entities may include, but are not limited to: • Crop production (NAICS 111) • Animal production (NAICS 112) • Food manufacturing (NAICS 311) • Pesticide manufacturing (NAICS 32532) This listing is not intended to be exhaustive, but rather provides a guide for readers regarding entities likely to be affected by this action. Other types of entities not listed in this unit could also be affected. The North American Industrial Classification System (NAICS) codes have been provided to assist you and others in determining whether this action might apply to certain entities. If you have any questions regarding the applicability of this action to a particular entity, consult the person listed under FOR FURTHER INFORMATION CONTACT . B. How Can I Get Copies of this Document and Other Related Information? 1. *Docket* . EPA has established an official public docket for this action under docket identification

(ID)number OPP-2004-0051. The official public docket consists of the documents specifically referenced in this action, any public comments received, and other information related to this action. Although a part of the official docket, the public docket does not include Confidential Business Information

(CBI)or other information whose disclosure is restricted by statute. The official public docket is the collection of materials that is available for public viewing at the Public Information and Records Integrity Branch (PIRIB), Rm. 119, Crystal Mall #2, 1921 Jefferson Davis Hwy., Arlington, VA. This docket facility is open from 8:30 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The docket telephone number is

(703)305-5805. 2. *Electronic access* . You may access this **Federal Register** document electronically through the EPA Internet under the “ **Federal Register** ” listings at *http://www.epa.gov/fedrgstr/* . An electronic version of the public docket is available through EPA's electronic public docket and comment system, EPA Dockets. You may use EPA Dockets at *http://www.epa.gov/edocket/* to submit or view public comments, access the index listing of the contents of the official public docket, and to access those documents in the public docket that are available electronically. Although not all docket materials may be available electronically, you may still access any of the publicly available docket materials through the docket facility identified in Unit I.B.1. Once in the system, select “search,” then key in the appropriate docket ID number. II. Background Under FIFRA section 18, EPA can authorize the use of a pesticide when emergency conditions exist. Authorizations (commonly called emergency exemptions) are granted to State and Federal agencies and are of four types: 1. A “specific exemption” authorizes use of a pesticide against specific pests on a limited acreage in a particular State. Most emergency exemptions are specific exemptions. 2. “Quarantine” and “public health” exemptions are a particular form of specific exemption issued for quarantine or public health purposes. These are rarely requested. 3. A “crisis exemption” is initiated by a State or Federal agency (and is confirmed by EPA) when there is insufficient time to request and obtain EPA permission for use of a pesticide in an emergency. EPA may deny an emergency exemption: If the State or Federal agency cannot demonstrate that an emergency exists, if the use poses unacceptable risks to the environment, or if EPA cannot reach a conclusion that the proposed pesticide use is likely to result in “a reasonable certainty of no harm” to human health, including exposure of residues of the pesticide to infants and children. If the emergency use of the pesticide on a food or feed commodity would result in pesticide chemical residues, EPA establishes a time-limited tolerance meeting the “reasonable certainty of no harm standard” of the Federal Food, Drug, and Cosmetic Act (FFDCA). In this document: EPA identifies the State or Federal agency granted the exemption or denial, the type of exemption, the pesticide authorized and the pests, the crop or use for which authorized, number of acres (if applicable), and the duration of the exemption. EPA also gives the **Federal Register** citation for the time-limited tolerance, if any. III. Emergency Exemptions and Denials A. U. S. States and Territories **Arkansas** State Plant Board *Crisis* : On August 29, 2003, for the use of spinosad on pastureland and rangeland to control armyworms. This program ended on December 31, 2003. Contact: (Andrew Ertman) *Specific* : EPA authorized the use of spinosad on pastureland and rangeland to control armyworms; August 29, 2003 to December 31, 2003. Contact: (Andrew Ertman) **California** Environmental Protection Agency, Department of Pesticide Regulation *Specific* : EPA authorized the use of pyriproxyfen on strawberry to control whiteflies; December 12, 2003 to December 12, 2004. Contact: (Andrea Conrath) *Specific* : EPA authorized the use of abamectin on spinach to control leafminer; December 23, 2003 to December 23, 2004. Contact: (Libby Pemberton) **Delaware** Department of Agriculture *Specific* : EPA authorized the use of thiophanate methyl on mushroom to control green mold; December 16, 2003 to December 16, 2004. Contact: (Andrea Conrath) **Florida** Department of Agriculture and Consumer Services *Specific* : EPA authorized the use of thymol on beehives to control varroa mites; November 6, 2003 to November 8, 2004. Contact: (Stacey Milan Groce) **Georgia** Department of Agriculture *Specific* : EPA authorized the use of thymol on beehives to control varroa mites; October 14, 2003 to December 31, 2003. Contact: (Stacey Milan Groce) *Specific* : EPA authorized the use of flufenacet on wheat to control ryegrass; October 27, 2003 to December 31, 2003. Contact: (Andrew Ertman) **Maryland** Department of Agriculture *Specific* : EPA authorized the use of thymol on beehives to control varroa mites; October 14, 2003 to December 31, 2003. Contact: (Stacey Milan Groce) *Specific* : EPA authorized the use of thiophanate methyl on mushroom to control green mold; December 30, 2003 to December 30, 2004. Contact: (Andrea Conrath) **Mississippi** Department of Agriculture and Commerce *Specific* : EPA authorized the use of niclosamide on catfish ponds to control ram's horn snail; December 31, 2003 to December 31, 2004. Contact: (Stacey Milan Groce) **Nebraska** Department of Agriculture *Specific* : EPA authorized the use of tebuconazole on field corn seed to control head smut; December 22, 2003 to May 30, 2004. Contact: (Libby Pemberton) **New Jersey** Department of Environmental Protection *Denial* : On October 3, 2003, EPA denied a specific exemption request for the use of propamocarb hydrochloride on tomatoes to control late blight. This request was denied because available alternatives are expected to be sufficient to avert emergency losses. Concurrently, a crisis exemption which was declared by New Jersey on August 21, 2003, for this use was revoked. Contact: (Libby Pemberton) **North Carolina** Department of Agriculture *Specific* : EPA authorized the use of flufenacet on wheat to control ryegrass; October 14, 2003 to December 31, 2003. Contact: (Andrew Ertman) **Pennsylvania** Department of Agriculture *Specific* : EPA authorized the use of thiophanate methyl on mushroom to control green mold; December 16, 2003 to December 16, 2004. Contact: (Andrea Conrath) **South Carolina** Clemson University *Specific* : EPA authorized the use of flufenacet on wheat to control ryegrass; November 20, 2003 to January 31, 2004. Contact: (Andrew Ertman) **Virginia** Department of Agriculture and Consumer Services *Specific* : EPA authorized the use of flufenacet on wheat to control ryegrass; October 16, 2003 to March 31, 2004. Contact: (Andrew Ertman) **Wisconsin** Department of Agriculture, Trade, and Consumer Protection *Crisis* : On March 28, 2003, for the use of imidacloprid on soybean seed to control bean leaf beetles. This program ended on April 30, 2003. Contact: (Andrew Ertman) List of Subjects Environmental protection, Pesticides and pest. Dated: March 4, 2004. Lois Rossi, Director, Registration Division, Office of Pesticide Programs. [FR Doc. E4-551 Filed 3-16-04; 8:45 am] BILLING CODE 6560-50-S ENVIRONMENTAL PROTECTION AGENCY [OPPT-2004-0083]; FRL-7350-7] Certain New Chemicals; Receipt and Status Information AGENCY: Environmental Protection Agency (EPA). ACTION: Notice. SUMMARY: Section 5 of the Toxic Substances Control Act

(TSCA)requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory) to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a premanufacture notice

(PMN)or an application for a test marketing exemption (TME), and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from February 16, 2004 to February 27, 2004, consists of the PMNs pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. DATES: Comments identified by the docket ID number OPPT-2004-0083 and the specific PMN number or TME number, must be received on or before April 16, 2004. ADDRESSES: Comments may be submitted electronically, by mail, or through hand delivery/courier. Follow the detailed instructions as provided in Unit I. of the SUPPLEMENTARY INFORMATION . FOR FURTHER INFORMATION CONTACT: Barbara Cunningham, Director, Environmental Assistance Division, Office of Pollution Prevention and Toxics (7408M), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001; telephone number:

(202)554-1404; e-mail address: *TSCA-Hotline@epa.gov* . SUPPLEMENTARY INFORMATION: I. General Information A. Does this Action Apply to Me? This action is directed to the public in general. As such, the Agency has not attempted to describe the specific entities that this action may apply to. Although others may be affected, this action applies directly to the submitter of the premanufacture notices addressed in the action. If you have any questions regarding the applicability of this action to a particular entity, consult the person listed under FOR FURTHER INFORMATION CONTACT . B. How Can I Get Copies of this Document and Other Related Information? 1. *Docket.* EPA has established an official public docket for this action under docket identification

(ID)number OPPT-2004-0083. The official public docket consists of the documents specifically referenced in this action, any public comments received, and other information related to this action. Although a part of the official docket, the public docket does not include Confidential Business Information

(CBI)or other information whose disclosure is restricted by statute. The official public docket is the collection of materials that is available for public viewing at the EPA Docket Center, Rm. B102-Reading Room, EPA West, 1301 Constitution Ave., NW., Washington, DC. The EPA Docket Center is open from 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding legal holidays. The EPA Docket Center Reading Room telephone number is

(202)566-1744 and the telephone number for the OPPT Docket, which is located in EPA Docket Center, is

(202)566-0280. 2. *Electronic access* . You may access this **Federal Register** document electronically through the EPA Internet under the “ **Federal Register** ” listings at *http://www.epa.gov/fedrgstr/* . An electronic version of the public docket is available through EPA's electronic public docket and comment system, EPA Dockets. You may use EPA Dockets at *http://www.epa.gov/edocket/* to submit or view public comments, access the index listing of the contents of the official public docket, and to access those documents in the public docket that are available electronically. Although not all docket materials may be available electronically, you may still access any of the publicly available docket materials through the docket facility identified in Unit I.B.1. Once in the system, select “search,” then key in the appropriate docket ID number. Certain types of information will not be placed in the EPA Dockets. Information claimed as CBI and other information whose disclosure is restricted by statute, which is not included in the official public docket, will not be available for public viewing in EPA's electronic public docket. EPA's policy is that copyrighted material will not be placed in EPA's electronic public docket but will be available only in printed, paper form in the official public docket. To the extent feasible, publicly available docket materials will be made available in EPA's electronic public docket. When a document is selected from the index list in EPA Dockets, the system will identify whether the document is available for viewing in EPA's electronic public docket. Although not all docket materials may be available electronically, you may still access any of the publicly available docket materials through the docket facility identified in Unit I.B.1. EPA intends to work towards providing electronic access to all of the publicly available docket materials through EPA's electronic public docket. For public commenters, it is important to note that EPA's policy is that public comments, whether submitted electronically or in paper, will be made available for public viewing in EPA's electronic public docket as EPA receives them and without change, unless the comment contains copyrighted material, CBI, or other information whose disclosure is restricted by statute. When EPA identifies a comment containing copyrighted material, EPA will provide a reference to that material in the version of the comment that is placed in EPA's electronic public docket. The entire printed comment, including the copyrighted material, will be available in the public docket. Public comments submitted on computer disks that are mailed or delivered to the docket will be transferred to EPA's electronic public docket. Public comments that are mailed or delivered to the docket will be scanned and placed in EPA's electronic public docket. Where practical, physical objects will be photographed, and the photograph will be placed in EPA's electronic public docket along with a brief description written by the docket staff. C. How and To Whom Do I Submit Comments? You may submit comments electronically, by mail, or through hand delivery/courier. To ensure proper receipt by EPA, identify the appropriate docket ID number and specific PMN number or TME number in the subject line on the first page of your comment. Please ensure that your comments are submitted within the specified comment period. Comments received after the close of the comment period will be marked “late.” EPA is not required to consider these late comments. If you wish to submit CBI or information that is otherwise protected by statute, please follow the instructions in Unit I.D. Do not use EPA Dockets or e-mail to submit CBI or information protected by statute. 1. *Electronically* . If you submit an electronic comment as prescribed in this unit, EPA recommends that you include your name, mailing address, and an e-mail address or other contact information in the body of your comment. Also include this contact information on the outside of any disk or CD ROM you submit, and in any cover letter accompanying the disk or CD ROM. This ensures that you can be identified as the submitter of the comment and allows EPA to contact you in case EPA cannot read your comment due to technical difficulties or needs further information on the substance of your comment. EPA's policy is that EPA will not edit your comment, and any identifying or contact information provided in the body of a comment will be included as part of the comment that is placed in the official public docket, and made available in EPA's electronic public docket. If EPA cannot read your comment due to technical difficulties and cannot contact you for clarification, EPA may not be able to consider your comment. i. *EPA Dockets* . Your use of EPA's electronic public docket to submit comments to EPA electronically is EPA's preferred method for receiving comments. Go directly to EPA Dockets at *http://www.epa.gov/edocket/* , and follow the online instructions for submitting comments. Once in the system, select “search,” and then key in docket ID number OPPT-2004-0083. The system is an “anonymous access” system, which means EPA will not know your identity, e-mail address, or other contact information unless you provide it in the body of your comment. ii. *E-mail* . Comments may be sent by e-mail to *oppt.ncic@epa.gov* , Attention: Docket ID Number OPPT-2004-0083 and PMN Number or TME Number. In contrast to EPA's electronic public docket, EPA's e-mail system is not an “anonymous access” system. If you send an e-mail comment directly to the docket without going through EPA's electronic public docket, EPA's e-mail system automatically captures your e-mail address. E-mail addresses that are automatically captured by EPA's e-mail system are included as part of the comment that is placed in the official public docket, and made available in EPA's electronic public docket. iii. *Disk or CD ROM* . You may submit comments on a disk or CD ROM that you mail to the mailing address identified in Unit I.C.2. These electronic submissions will be accepted in WordPerfect or ASCII file format. Avoid the use of special characters and any form of encryption. 2. *By mail* . Send your comments to: Document Control Office (7407M), Office of Pollution Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001. 3. *By hand delivery or courier* . Deliver your comments to: OPPT Document Control Office

(DCO)in EPA East Bldg., Rm. 6428, 1201 Constitution Ave., NW., Washington, DC. Attention: Docket ID Number OPPT-2004-0083 and PMN Number or TME Number. The DCO is open from 8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The telephone number for the DCO is

(202)564-8930. D. How Should I Submit CBI to the Agency? Do not submit information that you consider to be CBI electronically through EPA's electronic public docket or by e-mail. You may claim information that you submit to EPA as CBI by marking any part or all of that information as CBI (if you submit CBI on disk or CD ROM, mark the outside of the disk or CD ROM as CBI and then identify electronically within the disk or CD ROM the specific information that is CBI). Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2. In addition to one complete version of the comment that includes any information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public docket and EPA's electronic public docket. If you submit the copy that does not contain CBI on disk or CD ROM, mark the outside of the disk or CD ROM clearly that it does not contain CBI. Information not marked as CBI will be included in the public docket and EPA's electronic public docket without prior notice. If you have any questions about CBI or the procedures for claiming CBI, please consult the technical person listed under FOR FURTHER INFORMATION CONTACT . E. What Should I Consider as I Prepare My Comments for EPA? You may find the following suggestions helpful for preparing your comments: 1. Explain your views as clearly as possible. 2. Describe any assumptions that you used. 3. Provide copies of any technical information and/or data you used that support your views. 4. If you estimate potential burden or costs, explain how you arrived at the estimate that you provide. 5. Provide specific examples to illustrate your concerns. 6. Offer alternative ways to improve the notice or collection activity. 7. Make sure to submit your comments by the deadline in this document. 8. To ensure proper receipt by EPA, be sure to identify the docket ID number assigned to this action and the specific PMN number you are commenting on in the subject line on the first page of your response. You may also provide the name, date, and **Federal Register** citation. II. Why is EPA Taking this Action? Section 5 of TSCA requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a PMN or an application for a TME and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from February 16, 2004 to February 27, 2004, consists of the PMNs pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. III. Receipt and Status Report for PMNs This status report identifies the PMNs pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. If you are interested in information that is not included in the following tables, you may contact EPA as described in Unit II. to access additional non-CBI information that may be available. In Table I of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the PMNs received by EPA during this period: the EPA case number assigned to the PMN; the date the PMN was received by EPA; the projected end date for EPA's review of the PMN; the submitting manufacturer; the potential uses identified by the manufacturer in the PMN; and the chemical identity. **I. 57 Premanufacture Notices Received From: 2/16/04 to 02/27/04** Case No. Received Date Projected Notice End Date Manufacturer/Importer Use Chemical P-04-0338 02/17/04 05/16/04 CBI

(G)Polymerization catalyst/initiator for thermosetting acrylic adhesive

(G)Amino alkyl organoborane P-04-0339 02/17/04 05/16/04 Teknor apex company

(G)Plasticizer

(G)Aliphatic carboxylic acid ester P-04-0340 02/17/04 05/16/04 CBI

(G)Polymerization additive

(G)Polyoxyether salt P-04-0341 02/17/04 05/16/04 3M Company

(S)Solvent coating; heat transfer

(G)Hydrofluoroether P-04-0342 02/17/04 05/16/04 H.B. Fuller

(G)Industrial adhesive

(G)Polyurethane prepolymer P-04-0343 02/17/04 05/16/04 H.B. Fuller

(G)Industrial adhesive

(G)Polyurethane prepolymer P-04-0344 02/17/04 05/16/04 Eastman Kodak Company

(G)Chemical intermediate, destructive use

(G)Sulfonyl substituted alkane P-04-0345 02/18/04 05/17/04 Dow Corning Corporation

(G)Coating

(G)Amino silane salt P-04-0346 02/18/04 05/17/04 CBI

(G)Binder component

(G)Copolymer of phenol and aromatic hydrocarbon P-04-0347 02/18/04 05/17/04 CBI

(G)Binder component

(G)Copolymer of phenol and aromatic hydrocarbon P-04-0348 02/18/04 05/17/04 Symrise Inc.

(G)Additive for industrial and consumer products dispersive use

(S)7-cyclohexadecen-1-one, (e)8- cyclohexadecen-1-one,

(z)P-04-0349 02/19/04 05/18/04 CBI

(G)Contained use in energy production.

(G)Phosphonate salt P-04-0350 02/19/04 05/18/04 CBI

(G)Destructive use

(G)Sulfurized pib distillate P-04-0351 02/19/04 05/18/04 CBI

(S)Resin for ultraviolet curable coatings; resin for ultraviolet curable inks

(G)Product of acrylic acid and a polyester polyol P-04-0352 02/19/04 05/18/04 Mitsui Chemicals America, Inc.

(G)Manufacture of printable polymer film

(G)Ethylene-tetracyclododecene copolymer P-04-0353 02/19/04 05/18/04 CBI

(G)Colourant

(G)Azo nickel complex P-04-0354 02/19/04 05/18/04 CBI

(G)Nonwoven binder intermediate

(G)Acrylic polymer P-04-0355 02/19/04 05/18/04 CBI

(G)Nonwoven binder

(G)Acrylic polymer P-04-0356 02/19/04 05/18/04 CBI

(G)Nonwoven binder intermediate

(G)Acrylic polymer P-04-0357 02/19/04 05/18/04 CBI

(G)Nonwoven binder

(G)Acrylic polymer P-04-0358 02/20/04 05/19/04 CBI

(G)Crystallization aid

(G)Alkylamine sodium sulfonate P-04-0359 02/20/04 05/19/04 CBI

(G)Crystallization aid

(G)Alkylamine sodium sulfonate P-04-0360 02/17/04 05/16/04 Ashland Inc., Enviornmental Health and Safety

(G)Adhesive, coating, ink

(G)Multifuctional acrylate oligomer resin P-04-0361 02/17/04 05/16/04 Ashland Inc., Enviornmental Health and Safety

(G)Adhesive, coating, ink

(G)Multifuctional acrylate oligomer resin P-04-0362 02/17/04 05/16/04 Ashland Inc., Enviornmental Health and Safety

(G)Adhesive, coating, ink

(G)Multifuctional acrylate oligomer resin P-04-0363 02/17/04 05/16/04 Ashland Inc., Enviornmental Health and Safety

(G)Adhesive, coating, ink

(G)Multifuctional acrylate oligomer resin P-04-0364 02/17/04 05/16/04 Ashland Inc., Enviornmental Health and Safety

(G)Adhesive, coating, ink

(G)Multifuctional acrylate oligomer resin P-04-0365 02/17/04 05/16/04 Ashland Inc., Enviornmental Health and Safety

(G)Adhesive, coating, ink

(G)Multifuctional acrylate oligomer resin P-04-0366 02/20/04 05/19/04 CBI

(G)Hardner

(G)Blocked isocyanate P-04-0367 02/23/04 05/22/04 CBI

(G)Additive, open, non-dispersive use

(G)Fatty acid ester amine compound P-04-0368 02/23/04 05/22/04 Ashland Inc., Enviornmental Health and Safety

(G)Raw material for the synthesis of multi-functional acrylate oligomers to be used in adhesives, coatings and inks

(G)Ketoester P-04-0369 02/23/04 05/22/04 Ashland Inc., Enviornmental Health and Safety

(G)Raw material for the synthesis of multi-functional acrylate oligomers to be used in adhesives, coatings and inks

(G)Ketoester P-04-0370 02/23/04 05/22/04 CIBA Specialty Chemicals Corporation

(S)Binder resin for coatings

(G)Acrylic polymer P-04-0371 02/23/04 05/22/04 Essential Industries

(S)Raw material for wood coatings

(G)Aliphatic polyurethane dispersion P-04-0372 02/23/04 05/22/04 Symrise Inc.

(G)Additive for consumer products dispersive use

(S)1-pentanol, 2-mercapto-2-methyl- P-04-0373 02/24/04 05/23/04 Symrise Inc.

(G)Additive for industrial and commercial products dispersive use

(S)Carbonic acid, 2-hydroxypropyl (1r,2s,5r)-5-methyl-2-(1-methylethyl)cyclohexyl ester P-04-0374 02/24/04 05/23/04 Ashland Inc., Enviornmental Health and Safety

(G)Adhesive, coating, ink

(G)Multifunctional acrylate oligomer resin P-04-0375 02/24/04 05/23/04 Ashland Inc., Enviornmental Health and Safety

(G)Adhesive, coating, ink

(G)Multifunctional acrylate oligomer resin P-04-0376 02/24/04 05/23/04 Ashland Inc., Enviornmental Health and Safety

(G)Adhesive, coating, ink

(G)Multifunctional acrylate oligomer resin P-04-0377 02/24/04 05/23/04 Ashland Inc., Enviornmental Health and Safety

(G)Adhesive, coating, ink

(G)Multifunctional acrylate oligomer resin P-04-0378 02/24/04 05/23/04 Ashland Inc., Enviornmental Health and Safety

(G)Adhesive, coating, ink

(G)Multifunctional acrylate oligomer resin P-04-0379 02/24/04 05/23/04 Ashland Inc., Enviornmental Health and Safety

(G)Adhesive, coating, ink

(G)Multifunctional acrylate oligomer resin P-04-0380 02/25/04 05/24/04 Huntsman Petrochemical Corporation

(G)Intermediate

(G)Polyether polyol P-04-0381 02/25/04 05/24/04 CBI

(S)Intermediate for epoxy curing agent

(G)Modified amine adduct P-04-0382 02/25/04 05/24/04 CBI

(G)Component of pvc stabilizer systems

(G)Zinc soap P-04-0383 02/25/04 05/24/04 CBI

(G)Auxiliary for coatings

(G)Hydroxyalkyl carboxylic acid, polymer with alkylamine, alkanediol, alkyldiisocyanate and polyalkyl ether, polyalkylene glycol ether-blocked, compounds with alkylamine P-04-0384 02/25/04 05/24/04 Huntsman Petrochemical Corporation

(G)Resin curing agent

(G)Aliphatic polyethertriamine P-04-0385 02/26/04 05/25/04 Ashland Inc., Enviornmental Health and Safety

(G)Adhesive, coating, ink

(G)Multifuctional acrylate oligomer resin P-04-0386 02/26/04 05/25/04 Ashland Inc., Enviornmental Health and Safety

(G)Adhesive, coating, ink

(G)Multifuctional acrylate oligomer resin P-04-0387 02/26/04 05/25/04 Ashland Inc., Enviornmental Health and Safety

(G)Adhesive, coating, ink

(G)Multifuctional acrylate oligomer resin P-04-0388 02/26/04 05/25/04 Apollo America Corporation

(G)Lubricating oil

(G)Saturated cyclic hydrocarbon P-04-0389 02/26/04 05/25/04 Apollo America Corporation

(G)Lubricating oil

(G)Saturated cyclic hydrocarbon P-04-0390 02/27/04 05/26/04 CBI

(G)Colourant

(G)Sulphonated azo dye P-04-0391 02/27/04 05/26/04 Degussa Corporation

(S)Industrial powder coating systems

(G)Alkanediol, polymer with alkanedioic anhydride P-04-0392 02/27/04 05/26/04 Meadwestvaco SC, LLC - Specialty Chemicals Division

(S)Asphalt emulsifier salt

(G)Aliphatic n-substituted carboxylic acid amide, hydrochloride P-04-0423 02/27/04 05/26/04 CBI

(G)Additive in manufacture of carbonless paper (two polymers)

(G)Polymeric carboxylic acid salt In Table II of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the Notices of Commencement to manufacture received: **II. 36 Notices of Commencement From: 2/16/04 to 02/27/04** Case No. Received Date Commencement Notice End Date Chemical P-00-1225 02/23/04 01/25/04

(G)1,7-naphthalenedisulfonic acid, 2-[[substitutedamino]-5-hydroxy-6-[(4-methyl-2-sulfophenyl]azo]-,salt P-02-0273 02/19/04 01/27/04

(S)D-glucopyranose, oligomeric, C 10-12 -alkyl glycosides P-02-0421 02/17/04 02/09/04

(G)Substituted polyoxyethylene P-02-0989 02/24/04 01/29/04

(G)Aliphatic polyester polyurethane polymer P-02-1072 02/25/04 01/30/04

(S)2-propenoic acid, 2-methyl-, polymer with ethenylbenzene, 2-ethyhexyl 2-propenoate, 1,6-hexanediyl di-2-propenoate and methyl 2-methyl-2-propenoate P-02-1073 02/24/04 01/27/04

(S)2-propenoic acid, 2-methyl-, polymer with ethenylbenzene, 2-ethyhexyl 2-propenoate, 1,6-hexanediyl di-2-propenoate and methyl 2-methyl-2-propenoate, ammonium salt P-02-1078 02/17/04 02/11/04

(G)Mannich base P-02-1080 02/17/04 02/11/04

(G)Mannich base P-03-0077 02/19/04 02/12/04

(S)Phosphonium, tributyl(2-methoxypropyl)-, salt with 1,1,2,2,3,3,4,4,4-nonafluoro-n-methyl-1-butanesulfonamide (1:1) P-03-0233 02/19/04 02/04/04

(G)Calcium salt of a polyolefin substituted phenol P-03-0234 02/19/04 01/27/04

(G)Phenolic resin P-03-0311 02/23/04 02/06/04

(G)Alkoxylated monobutyl ether P-03-0549 02/24/04 01/26/04

(G)1,3-bis(dimethoxyethylol) 4,5-dihydroxyethylene urea P-03-0634 02/20/04 01/16/04

(G)Acrylate, acrylonitrile, butadiene rubber-extended epoxy resin polymer P-03-0667 02/24/04 02/02/04

(G)Urea dimethoxyethanal resin P-03-0685 02/24/04 01/29/04

(G)Fatty acid ester P-03-0690 02/23/04 02/10/04

(G)Rosin, polymer with a monocarboxylic acid, a phenol, maleic anhydride, formaldehyde and pentaerythritol. P-03-0767 02/18/04 02/02/04

(G)Aromatic isocyanate methacrylate blocked P-03-0803 02/27/04 01/27/04

(G)Aliphatic phosphate diacrylate P-03-0813 02/18/04 02/12/04

(G)Polymeric modified vegetable oil P-03-0829 02/23/04 02/06/04

(G)Telechelic polyacrylate P-04-0001 02/25/04 02/05/04

(S)Poly(oxy-1,2-ethanediyl),.alpha.-(1-oxo-2-propenyl)-.omega.-([1,1′-biphenyl]-2-yloxy)- P-04-0002 02/25/04 02/05/04

(S)Hexanedioic acid, polymer with 1,6-diisocyanatohexane, 1,6-diisocyanato-2,2,4-trimethylhexane, 1,6-diisocyanato-2,4,4-trimethylhexane, 1,1′-[(1-methylethylidene)bis(4,1-phenyleneoxy)]bis[2-propanol] and 3-methyl-1,5-pentanediol, 2-hydroxyethyl acrylate-blocked P-04-0003 02/25/04 02/05/04

(S)2-propenoic acid, 2-methyl-, 1,2,2,6,6-pentamethyl-4-piperidinyl ester P-04-0004 02/25/04 02/05/04

(S)Poly[oxy(methyl-1,2-ethanediyl)],.alpha.,.alpha′.-[(1-methylethylidine)di-4,1-phenylene]bis[.omega.-[(1-oxo-2-propenyl)oxy]- P-04-0022 02/17/04 02/05/04

(S)Fatty acids, C 14-18 and C 16-18 unsaturated-2-ethyl hexyl esters P-04-0034 02/23/04 02/03/04

(G)Lithium grease thickener P-04-0045 02/26/04 01/27/04

(G)Epoxy-acrylic copolymer P-04-0053 02/25/04 02/05/04

(S)2-propenoic acid, 1,9-nonanediyl ester P-04-0060 02/20/04 01/22/04

(G)Substituted metal complex P-04-0061 02/20/04 01/22/04

(G)Substituted metal complex P-04-0062 02/20/04 01/22/04

(G)Modified metal complex P-04-0118 02/24/04 02/10/04

(G)Triamine adipate salt P-04-0120 02/18/04 02/12/04

(G)Isocyanate functional polyester polyether urethane polymer P-96-0159 02/18/04 01/30/04

(G)Polyurethane adhesive P-96-0412 02/24/04 05/08/96

(G)Hydroxy functional oligomer List of Subjects Environmental protection, Chemicals, Premanufacturer notices. Dated: March 11, 2004. Anthony Cheatham, Acting Director, Information Management Division, Office of Pollution Prevention and Toxics. [FR Doc. 04-6006 Filed 3-16-04; 8:45 am]

Notices. Notice