Rules and Regulations. Notice

Agency: Environmental Protection Agency (EPA)
Action: Notice
Citation: FR Doc. 01-22748 · FRL-7053-8

Summary

In compliance with the Paperwork Reduction Act (44 U.S.C. 3501 et seq. ), this document announces that the following Information Collection Request (ICR) has been forwarded to the Office of Management and Budget (OMB) for review and approval: NESHAP for the Secondary Lead Smelter Industry, OMB No. 2060-0296, expiration date September 30, 2001. The ICR describes the nature of the information collection and its expected burden and cost; where appropriate, it includes the actual data collection instrument.

Dates

Comments must be submitted on or before October 11, 2001.

Supplementary Information

Title: NESHAP for the Secondary Lead Smelter Industry, OMB Control No. 2060-0296, EPA ICR No.1686.04, expiring September 30, 2001. This is a request for extension of a currently approved collection. Abstract: The National Emission Standards for Hazardous Air Pollutants (NESHAP) for Secondary Lead Smelting (40 CFR part 63, Subpart X) were proposed on June 9, 1994 (59 FR 29750) and promulgated on June 23, 1995 (60 FR 32587). In response to industry petitions to reconsider, the final rule was amended on June 13, 1997 (62 FR 32209). Entities potentially affected by this rule are owners or operators of secondary lead smelters that operate furnaces to reduce scrap lead metal and lead compounds to elemental lead. The rule applies to secondary lead smelters that use blast, reverberatory, rotary, or electric smelting furnaces to recover lead metal from scrap lead, primarily from used lead-acid automotive-type batteries. These sources are emitters of several chemicals identified as hazardous air pollutants, including but not limited to lead compounds, arsenic compounds, and 1,3-butadiene. The rule provides protection to the public by requiring all secondary lead smelters to meet emission standards reflecting the application of the maximum achievable control technology (MACT). This information is being collected to assure compliance with 40 CFR part 63, Subpart X. Owners or operators of the affected facilities described must make one-time-only notifications including: notification of any physical or operational change to an existing facility which may increase the regulated pollutant emission rate, notification of the initial performance test, including information necessary to determine the conditions of the performance test, and performance test measurements and results. All reports are sent to the delegated State or local authority. In the event that there is no such delegated authority, the reports are sent directly to the EPA Regional Office. Owners or operators must maintain records of initial and subsequent compliance tests for lead compounds, and identify the date, time, cause and corrective actions taken for all bag leak detection alarms. Records of continuous monitoring devices, including parametric monitoring, must be maintained and reported semiannually. Owners or operators are also required to maintain records of the occurrence and duration of any startup, shutdown, or malfunction in the operation of an affected facility, or any period during which the monitoring system is inoperative. Any owner or operator subject to the provisions of this part shall maintain a file of these measurements, and retain the records for at least five years following the date of such measurements and records. At a minimum, records of the previous two years must be maintained on site. Industry and EPA records indicate that 23 sources are subject to the standard, and no additional sources are expected to become subject to the standard over the next three years. However, we assume that one furnace will be rebuilt per year and that each facility will make a major adjustment once per year which will required revising it's operational plan. An agency may not conduct or sponsor, and a person is not required to respond to, a collection of information unless it displays a currently valid OMB control number. The OMB control numbers for EPA's regulations are listed in 40 CFR part 9 and 48 CFR Chapter 15. The Federal Register document required under 5 CFR 1320.8(d), soliciting comments on this collection of information was published on February 1, 2001. No comments were received. Burden Statement The annual public reporting and record keeping burden for this collection of information is estimated to average 229 hours per response (includes time for recordkeeping activities). Burden means the total time, effort, or financial resources expended by persons to generate, maintain, retain, or disclose or provide information to or for a Federal agency. This includes the time needed to review instructions; develop, acquire, install, and utilize technology and systems for the purposes of collecting, validating, and verifying information, processing and maintaining information, and disclosing and providing information; adjust the existing ways to comply with any previously applicable instructions and requirements; train personnel to be able to respond to a collection of information; search data sources; complete and review the collection of information; and transmit or otherwise disclose the information. Respondents/Affected Entities: Owners or operators of secondary lead smelters. Estimated Number of Respondents: 23. Frequency of Response: Semiannual reports and one-time only notifications. Estimated Total Annual Hour Burden: 16,033 person-hours. Estimated Total Annualized Capital, O&M Cost Burden: $150,000. Send comments on the Agency's need for this information, the accuracy of the provided burden estimates, and any suggested methods for minimizing respondent burden, including through the use of automated collection techniques to the following addresses. Please refer to EPA ICR No. 1686.04 and OMB Control No. 2060-0296 in any correspondence. Dated: August 29, 2001. Oscar Morales, Director, Collection Strategies Division. [FR Doc. 01-22748 Filed 9-10-01; 8:45 am]