Tap any paragraph to write a margin note. Your notes collect in the Desk below the text and file under cases with @. The side-by-side margin rail opens on a larger screen.

Code · REGISTER · 2000-10-24 · Federal Transit Administration (FTA), DOT · Notices

Notices. Notice of Granted Buy America Waiver

682 words·~3 min read·/register/2000/10/24/00-27297·

A research copy — for the controlling text, always check the official state or federal source. Not legal advice.

BILLING CODE 4710-07-P DEPARTMENT OF TRANSPORTATION Federal Transit Administration Notice of Granted Buy America Waiver AGENCY: Federal Transit Administration (FTA), DOT. ACTION: Notice of Granted Buy America Waiver. SUMMARY: This waiver allows ticket vending machine manufacturers to install the Giesecke & Devrient (“G&D”) banknote identification modules
(BIM)and count it as domestic for purposes of Buy America compliance. It is predicated on the non-availability of the item domestically and granted on July 21, 2000, for the period of two years, or until such time as a domestic source for this BIM becomes available, whichever occurs first. This notice shall insure that the public, particularly potential manufacturers, is aware of this waiver. FTA requests that the public notify it of any relevant changes in the domestic market. FTA also granted an identical waiver to Mars Electronics, a competitor of G&D and manufacturer of a similar device. That waiver is published elsewhere in today's **Federal Register** . FOR FURTHER INFORMATION CONTACT: Meghan G. Ludtke, FTA Office of Chief Counsel, Room 9316,
(202)366-4011 (telephone) or
(202)366-3809 (fax). SUPPLEMENTARY INFORMATION: The above-referenced waiver follows: July 21, 2000. Mr. Klaus J. Krauth, Vice President, Chief Financial Officer, Giesecke & Devrient America, Inc., 45925 Horseshoe Drive, Dulles, Virginia 20166. Re: Application for Waiver of Buy America for Automated Fare Collection System Component Dear Mr. Krauth: This letter responds to your correspondence of June 1, 2000, in which you request a Buy America component waiver based upon nonavailability for certain banknote identification modules
(BIM)manufactured for use in ticket vending machines. The BIM at issue here features unique security functions and the ability to be upgraded for currency changes. Based upon the fact that there were no known domestic sources, the Federal Transit Administration
(FTA)has granted Buy America waivers to one of your competitors, Mars Electronics, for its bill handling unit (BHU), an item with similar functionality to the BIM. Upon hearing from both Mars and G&D on the subject of a component waiver, FTA contacted Cubic Transportation Systems, Inc., a manufacturer of ticket vending machines using both BIM's and BHU's and requested that it submit its assessment of the state of this market. Cubic contended, by letter dated April 19, 2000, that based upon an extensive survey of the market, which is continuously updated by technical staff, there is no known U.S. manufacturer of a BIM/BHU that perform the functions listed herein. To date, Cubic has qualified only two sources for the BIM/BHU used in its ticket vending machines; those sources are G&D and Mars Electronics. This letter incorporates, by reference, the information contained in the above-referenced correspondence. FTA's requirements concerning domestic preference for federally funded transit projects are set forth in 49 U.S.C. § 5323(j). However, Section 5323(j)(2)(B) states that those requirements shall not apply if the item or items being procured are not produced in the U.S. in sufficient and reasonably available quantities and of a satisfactory quality. The implementing regulation also provides that a waiver may be requested “for a specific item or material that is used in the production of a manufactured product.” 49 CFR 661.7(g). The regulations allow a bidder or supplier to request a waiver only if it is being sought under this section. See 49 CFR 661.7(g) and 49 CFR 661.9(d). This waiver would allow G&D to treat the BIM as domestic. Based on the above-referenced information, I have determined that the grounds for a “nonavailability” waiver exist. Therefore, pursuant to the provisions of 49 U.S.C. § 5323(j)(2)(B), the waiver is hereby granted for manufacture of the BIM model number 2020 for the period of two years, or until such time as a domestic source for this type of component becomes available, whichever occurs first. In order to insure that the public is aware of this waiver, particularly potential manufacturers, it will be published in the **Federal Register** . If you have any questions, pleased contact Meghan G. Ludtke at
(202)366-4011. Very truly yours, Gregory B. McBride, Deputy Chief Counsel. Issued on: October 19, 2000. Nuria I. Fernandez, Acting Administrator. [FR Doc. 00-27297 Filed 10-23-00; 8:45 am]
Connectionstraces to 1
Traces to 1 document
2 references not yet in our index
  • 49 CFR 661.7(g)
  • 49 CFR 661.9(d)
Citation graph
cites case law
Notices
Notice of Granted Buy America Waiver
Cite49 CFR 661.7(g)
Cite49 CFR 661.9(d)
Cites 3Cited by 0 across 0 sources
★   the supreme law of the land   ★
Don't Tread on Me
E Pluribus Unum — out of many, one

"If you don't know your rights, you don't have any."

Marginalia · a citizen's law index
A research desk, not legal advice. Always read the cited source before relying on a summary.
Questions or an issue? support@self-law.org
disclaimerMarginalia is a research index, not a law firm. Nothing on this site is legal, tax, or financial advice and no attorney–client relationship is formed by using it. Statutes, regulations, and case law change; summaries, search results, AI output, and member posts may be incomplete, out of date, or wrong. Any interpretation drawn from material on this site should be validated by a licensed attorney in your jurisdiction before you act on it.