§ 143-215.25. Definitions.

311 words·~1 min read·/nc/chapter-143/143-215-25

A research copy — for the controlling text, always check the official state or federal source. Not legal advice.

As used in this Part, unless the context otherwise requires:

(1)Dam. - A structure and appurtenant works erected to impound or divert water.

(1a)Mill dam. - A dam built across a stream to raise the level of water for the purpose of providing water to a mill for the operation of the mill.

(2)Minimum stream flow or minimum flow. - A stream flow of a quantity and quality sufficient in the judgment of the Department to meet and maintain stream classifications and water quality standards established by the Department under G.S. 143-214.1 and applicable to the waters affected by the project under consideration, and to maintain aquatic habitat in the length of the stream that is affected.

(2a)Phased compliance eligible dam. - A dam that

(i)is categorized as high hazard by the Department,

(ii)was constructed prior to January 1, 1968, and

(iii)is not owned by a unit of local government, special district, or public authority, as those terms are defined in G.S. 159-7.

(3)Professionally supervised dam removal. - The voluntary removal of a low or intermediate hazard mill dam or run-of-river dam that

(i)is not operated primarily for flood control or hydroelectric power generation purposes and

(ii)the removal of which is designed and supervised by a qualified engineer.

(4)Qualified engineer. - An engineer licensed as a professional engineer under Chapter 89C of the General Statutes.

(5)Run-of-river dam. - A riverine or stream dam that is designed or operated to release water at approximately the same rate as the natural flow of the river or stream. (1967, c. 1068, s. 3; 1973, c. 1262, ss. 23, 38; 1977, c. 771, s. 4; c. 878, ss. 2, 4; 1983, c. 306; 1987, c. 827, ss. 154, 175; 1993, c. 394, s. 2; 2017-145, s. 1(a); 2023-131, s. 1(a).)