257.702 Head lamps on mopeds; single beam or multiple beam type; requirements and limitations.
213 words·~1 min read·
/mi/chapter-257/257-702A research copy — for the controlling text, always check the official state or federal source. Not legal advice.
257.702 Head lamps on mopeds; single beam or multiple beam type; requirements and limitations.
Sec. 702.
The head lamp or head lamps upon every moped may be of the single beam or multiple beam type, but in either event shall comply with the requirements and limitations as follows:
(1)Every head lamp or head lamps on a moped shall be of sufficient intensity to reveal a person or a vehicle at a distance of not less than 100 feet.
(2)If the moped is equipped with a multiple beam head lamp or head lamps, the upper beam shall meet the minimum requirements set forth above and shall not exceed the limitations set forth in section 699(b) and the lowermost beam shall meet the requirements applicable to a lowermost distribution of light, as set forth in section 699(c).
(3)If the moped is equipped with a single beam lamp or lamps, the lamp or lamps shall be so aimed that when the vehicle is loaded none of the high intensity portion of light, at a distance of 25 feet ahead, shall project higher than the level of the center of the lamp from which it comes.
History: 1949, Act 300, Eff. Sept. 23, 1949 ;-- Am. 1976, Act 439, Imd. Eff. Jan. 13, 1977