198B.310 Labeling requirements.
136 words·~1 min read·
/ky/chapter-198b/198b-310A research copy — for the controlling text, always check the official state or federal source. Not legal advice.
(1)Each light of safety glazing material manufactured, distributed, imported, or
sold for use in hazardous locations or installed in a similar location within the
Commonwealth of Kentucky shall be permanently labeled by such means as
etching, sandblasting or firing ceramic material on the safety glazing material.
The label shall identify the labeler, whether manufacturer, fabricator, or
installer, and the nominal thickness and the type of safety glazing material and
the fact that the material meets the test requirements of the current ANSI
standard or other generally accepted industry standard as adopted by the
department through the promulgation of an administrative regulation; and any
further requirements that may be adopted by the department. The label shall
be legible and visible after installation.
(2)Safety glazing labeling shall not be used on other than safety glazing materials.