§ 44340
344 words·~2 min read·
/ca/health-and-safety-code/44340A research copy — for the controlling text, always check the official state or federal source. Not legal advice.
(a)The operator of each facility subject to this part shall prepare and submit to the district a proposed comprehensive emissions inventory plan in accordance with the criteria and guidelines adopted by the state board pursuant to Section 44342.
(b)The proposed plan shall be submitted to the district on or before August 1, 1989, except that, for any facility to which subdivision
(b)of Section 44322 applies, the proposed plan shall be submited to the district on or before August 1, 1990. The district shall approve, modify, and approve as modified, or return for revision and resubmission, the plan within 120 days of receipt.
(c)The district shall not approve a plan unless all of the following conditions are met:
(1)The plan meets the requirements established by the state board pursuant to Section 44342.
(2)The plan is designed to produce, from the list compiled and maintained pursuant to Section 44321, a comprehensive characterization of the full range of hazardous materials that are released, or that may be released, to the surrounding air from the facility. Air release data shall be collected at, or calculated for, the primary locations of actual and potential release for each hazardous material. Data shall be collected or calculated for all continuous, intermittent, and predictable air releases.
(3)The measurement technologies and estimation methods proposed provide state-of-the-art effectiveness and are sufficient to produce a true representation of the types and quantities of air releases from the facility.
(4)Source testing or other measurement techniques are employed wherever necessary to verify emission estimates, as determined by the state board and to the extent technologically feasible. All testing devices shall be appropriately located, as determined by the state board.
(5)Data are collected or calculated for the relevant exposure rate or rates of each hazardous material according to its characteristic toxicity and for the emission rate necessary to ensure a characterization of risk associated with exposure to releases of the hazardous material that meets the requirements of Section 44361. The source of all emissions shall be displayed or described.