Sec. 3. Advanced nuclear reactor research and development goals
1,349 words·~6 min read·
/bill/116/hr/8296/ih/section-3A research copy — for the controlling text, always check the official state or federal source. Not legal advice.
Subtitle E of title IX of the Energy Policy Act of 2005 ( 42 U.S.C. 16271 et seq.) is amended by adding at the end the following: In this section: The term advanced nuclear reactor means— a nuclear fission reactor, including a prototype plant (as defined in sections 50.2 and 52.1 of title 10, Code of Federal Regulations (or successor regulations)), with significant improvements compared to the most recent generation of fission reactors, including improvements such as— additional inherent safety features; lower waste yields; improved fuel performance; increased tolerance to loss of fuel cooling; enhanced reliability; increased proliferation resistance; increased thermal efficiency; reduced consumption of cooling water; the ability to integrate into electric applications and nonelectric applications; modular sizes to allow for deployment that corresponds with the demand for electricity; or operational flexibility to respond to changes in demand for electricity and to complement integration with intermittent renewable energy; and a fusion reactor.
The term demonstration project means— an advanced nuclear reactor operated— as part of the power generation facilities of an electric utility system; or in any other manner for the purpose of demonstrating the suitability for commercial application of the advanced nuclear reactor; the demonstration of privately funded experimental advanced nuclear reactors, funded in whole or in part by the private sector, at National Laboratories or other sites owned by the Department of Energy; and an advanced nuclear reactor demonstrated by the Secretary of Defense in cooperation with the Secretary of Energy.
The purpose of this section is to direct the Secretary, as soon as practicable after the date of enactment of this section, to advance the research and development of domestic advanced, affordable, and clean nuclear energy by— demonstrating different advanced nuclear reactor technologies that could be used by the private sector to produce— emission-free power at a levelized cost of electricity of $60 per megawatt-hour or less; heat for community heating, industrial purposes, or synthetic fuel production; remote or off-grid energy supply; or backup or mission-critical power supplies; developing subgoals for nuclear energy research programs that would accomplish the goals of the demonstration projects carried out under subsection (c); identifying research areas that the private sector is unable or unwilling to undertake due to the cost of, or risks associated with, the research; and facilitating the access of the private sector— to Federal research facilities and personnel; and to the results of research relating to civil nuclear technology funded by the Federal Government.
The Secretary shall, to the maximum extent practicable— enter into agreements to complete not fewer than two demonstration projects by not later than December 31, 2025; and establish a program to enter into agreements to demonstrate not fewer than two, and not more than five, additional operational advanced reactor designs by not later than December 31, 2035. In carrying out demonstration projects under paragraph (1), the Secretary shall— include diversity in designs for the advanced nuclear reactors demonstrated under this section, including designs using various— primary coolants; fuel types and compositions; and neutron spectra; seek to ensure that— the long-term cost of electricity or heat for each design to be demonstrated under this subsection is cost-competitive in the applicable market; and the selected projects can meet the deadline established in paragraph
(1)to demonstrate first-of-a-kind advanced nuclear reactor technologies, for which additional information shall be considered, including— the technology readiness level of a proposed advanced nuclear reactor technology; the technical abilities and qualifications of teams desiring to demonstrate a proposed advanced nuclear reactor technology; and the capacity to meet cost-share requirements of the Department; ensure that each evaluation of candidate technologies for the demonstration projects is completed through an external review of proposed designs, which review shall— be conducted by a panel that includes not fewer than 1 representative of each of— an electric utility; and an entity that uses high-temperature process heat for manufacturing or industrial processing, such as a petrochemical company, a manufacturer of metals, or a manufacturer of concrete; include a review of cost-competitiveness and other value streams, together with the technology readiness level, of each design to be demonstrated under this subsection; and not be required for a demonstration project that is not federally funded; for federally funded demonstration projects, enter into cost-sharing agreements with private sector partners in accordance with section 988 for the conduct of activities relating to the research, development, and demonstration of private-sector advanced nuclear reactor designs under the program; work with private sector partners to identify potential sites, including Department-owned sites, for demonstrations, as appropriate; align specific activities carried out under demonstration projects carried out under this subsection with priorities identified through direct consultations between— the Department; relevant Federal agencies as determined by the Secretary; National Laboratories; institutions of higher education; traditional end-users (such as electric utilities); potential end-users of new technologies (such as users of high-temperature process heat for manufacturing processing, including petrochemical companies, manufacturers of metals, or manufacturers of concrete); and developers of advanced nuclear reactor technology; and seek to ensure that the demonstration projects carried out under paragraph
(1)do not cause any delay in a deployment of an advanced reactor by private industry and the Department of Energy that is underway as of the date of enactment of this section. In carrying out demonstration projects under paragraph (1), the Secretary shall— identify candidate technologies that— are not developed sufficiently for demonstration within the initial required timeframe described in paragraph (1)(A); but could be demonstrated within the timeframe described in paragraph (1)(B); identify technical challenges to the candidate technologies identified in subparagraph (A); support near-term research and development to address the highest-risk technical challenges to the successful demonstration of a selected advanced reactor technology, in accordance with— subparagraph (B); and the research and development activities under section 958; and establish such technology advisory working groups as the Secretary determines to be appropriate to advise the Secretary regarding the technical challenges identified under subparagraph
(B)and the scope of research and development programs to address the challenges, in accordance with subparagraph (C), to be comprised of— private-sector advanced nuclear reactor technology developers; technical experts with respect to the relevant technologies at institutions of higher education; and technical experts at the National Laboratories. The Secretary shall establish goals for research relating to advanced nuclear reactors facilitated by the Department that support the objectives of the program for demonstration projects established under subsection (c). In developing the goals under paragraph (1), the Secretary shall coordinate, on an ongoing basis, with members of private industry to advance the demonstration of various designs of advanced nuclear reactors. In developing the goals under paragraph (1), the Secretary shall ensure that— research activities facilitated by the Department to meet the goals developed under this subsection are focused on key areas of nuclear research and deployment ranging from basic science to full-design development, safety evaluation, and licensing; research programs designed to meet the goals emphasize— resolving materials challenges relating to extreme environments, including extremely high levels of— radiation fluence; temperature; pressure; and corrosion; and qualification of advanced fuels; activities are carried out that address near-term challenges in modeling and simulation to enable accelerated design and licensing; related technologies, such as technologies to manage, reduce, or reuse nuclear waste, are developed; nuclear research infrastructure is maintained or constructed, such as— currently operational research reactors at the National Laboratories and institutions of higher education; hot cell research facilities; a versatile fast neutron source; and a molten salt testing facility; basic knowledge of non-light water coolant physics and chemistry is improved; advanced sensors and control systems are developed; and advanced manufacturing and advanced construction techniques and materials are investigated to reduce the cost of advanced nuclear reactors. . The table of contents of the Energy Policy Act of 2005 ( Public Law 109–58 ; 119 Stat. 594) is amended— in the item relating to section 917, by striking Efficiency ; in the items relating to sections 957, 958, and 959, by inserting Sec. before 9 each place it appears; and by inserting after the item relating to section 959 the following: Sec. 959A. Advanced nuclear reactor research and development goals. .
Connectionstraces to 1
Traces to 1 document
U.S. Code
2 references not yet in our index
- Pub. L. 109-58
- 119 Stat. 594
Citation graph
cites case law
Sec. 3
Advanced nuclear reactor research and development goals
Pub. L.Pub. L. 109-58
Stat.119 Stat. 594
Cites 3Cited by 0 across 0 sources