Sec. 1016. Federal building energy efficiency performance standards
498 words·~2 min read·
/bill/114/s/2012/es/section-1016A research copy — for the controlling text, always check the official state or federal source. Not legal advice.
Section 303 of the Energy Conservation and Production Act ( 42 U.S.C. 6832 ) (as amended by section 1001(a)) is amended— in paragraph (6), by striking to be constructed and inserting constructed or altered ; and by adding at the end the following: The term major renovation means a modification of building energy systems sufficiently extensive that the whole building can meet energy standards for new buildings, based on criteria to be established by the Secretary through notice and comment rulemaking. .
Section 305(a)(3) of the Energy Conservation and Production Act ( 42 U.S.C. 6834(a)(3) ) (as amended by section 1015) is amended— by striking (3)(A) Not later than and all that follows through subparagraph
(B)and inserting the following: Not later than 1 year after the date of enactment of the Energy Policy Modernization Act of 2016 , the Secretary shall establish, by rule, revised Federal building energy efficiency performance standards that require that— new Federal buildings and alterations and additions to existing Federal buildings— meet or exceed the most recent revision of the International Energy Conservation Code (in the case of residential buildings) or ASHRAE Standard 90.1 (in the case of commercial buildings) as of the date of enactment of the Energy Policy Modernization Act of 2016 ; and meet or exceed the energy provisions of State and local building codes applicable to the building, if the codes are more stringent than the International Energy Conservation Code or ASHRAE Standard 90.1, as applicable; unless demonstrated not to be life-cycle cost effective for new Federal buildings and Federal buildings with major renovations— the buildings be designed to achieve energy consumption levels that are at least 30 percent below the levels established in the version of the ASHRAE Standard or the International Energy Conservation Code, as appropriate, that is applied under subclause (I)(aa), including updates under subparagraph (B); and sustainable design principles are applied to the location, siting, design, and construction of all new Federal buildings and replacement Federal buildings; if water is used to achieve energy efficiency, water conservation technologies shall be applied to the extent that the technologies are life-cycle cost effective; and if life-cycle cost effective, as compared to other reasonably available technologies, not less than 30 percent of the hot water demand for each new Federal building or Federal building undergoing a major renovation be met through the installation and use of solar hot water heaters. Clause (i)(I) shall not apply to unaltered portions of existing Federal buildings and systems that have been added to or altered. Not later than 1 year after the date of approval of each subsequent revision of the ASHRAE Standard or the International Energy Conservation Code, as appropriate, the Secretary shall determine whether the revised standards established under subparagraph
(A)should be updated to reflect the revisions, based on the energy savings and life-cycle cost-effectiveness of the revisions. ; and in subparagraph (C), by striking
(C)In the budget request and inserting the following: In the budget request .
Connectionstraces to 2
Traces to 2 documents
Citation graph
cites case law
Cites 2Cited by 0 across 0 sources