Sec. 2. Prohibition on toy, look-alike, and imitation firearms
520 words·~2 min read·
/bill/114/hr/3224/ih/section-2·A research copy — for the controlling text, always check the official state or federal source. Not legal advice.
Title I of the Consumer Product Safety Improvement Act of 2008 ( 15 U.S.C. 1278a et seq. ) is amended by adding at the end the following new section: It shall be unlawful for any person to manufacture, enter into commerce, ship, transport, or receive any toy, look-alike, or imitation firearm unless such firearm contains, or has affixed to it, a marking approved by the Commission, as provided subsection (b). Except as provided in paragraph
(2)or (3), each toy, look-alike, or imitation firearm shall have as an integral part, permanently affixed, a blaze orange plug inserted in the barrel of such toy, look-alike, or imitation firearm. Such plug shall be recessed no more than 6 millimeters from the muzzle end of the barrel of such firearm. The Commission may issue regulations to provide for an alternate marking or device for any toy, look-alike, or imitation firearm not capable of being marked as provided in paragraph
(1)and may waive the requirement of any such marking or device for any toy, look-alike, or imitation firearm that will only be used in the theatrical, movie, or television industry. The Commission is authorized to make adjustments and changes in the marking system provided for by this section, after consulting with interested persons. Unless and until the Commission issues regulations approving other markings or providing an alternate marking or device under this subsection, part 1150 of title 15, Code of Federal Regulations, as in effect on the day before the date of enactment of this Act, shall apply as if promulgated by the Commission. Markings approved under section 1150.3 of such part shall be considered markings approved by the Commission for purposes of subsection (a). For purposes of this section, the term look-alike firearm means any imitation of any original firearm which was manufactured, designed, and produced since 1898, including and limited to toy guns, water guns, replica nonguns, air-soft guns firing nonmetallic projectiles, and cases and covers for products where such case or cover has the appearance, shape, or configuration of a firearm. Such term does not include any look-alike, nonfiring, collector replica of an antique firearm developed prior to 1898, or traditional B–B, paint-ball, or pellet-firing air guns that expel a projectile through the force of air pressure. A violation of subsection
(a)shall be treated as a violation of section 19(a)(1) of the Consumer Product Safety Act ( 15 U.S.C. 2068(a)(1) ). Subsections
(a)and
(b)shall be considered consumer product safety standards under the Consumer Product Safety Act. The provisions of this section shall supersede any provision of State or local laws or ordinances which provide for markings or identification inconsistent with provisions of this section provided that no State shall— prohibit the sale or manufacture of any look-alike, nonfiring, collector replica of an antique firearm developed prior to 1898; or prohibit the sale (other than prohibiting the sale to minors) of traditional B–B, paint ball, or pellet-firing air guns that expel a projectile through the force of air pressure. . Section 4 of the Federal Energy Management Improvement Act of 1988 ( 15 U.S.C. 5001 ) is repealed.
Connectionstraces to 3
Citation graph
cites case law
Cites 3Cited by 0 across 0 sources