36-1632. Labeling of safety glazing materials
116 words·~1 min read·
/az/title-36/36-1632A research copy — for the controlling text, always check the official state or federal source. Not legal advice.
A. Each light of safety glazing material manufactured, distributed, imported, fabricated or sold for use in a hazardous location, or installed in such a location, within the state of Arizona shall be permanently labeled by such means as etching, sandblasting, firing of ceramic material, hot-die stamping, transparent pressure sensitive labels, or by other suitable means. The label shall identify the labeler, whether manufacturer, fabricator, installer or other distributor, the type of safety glazing material, and the fact that the material meets the test requirements of the American national standards institute
(ANSI)standard Z-97.1-1972. The label shall be legible and visible after installation.
B. Safety glazing labeling shall not be used on other than safety glazing materials.