41-6a-1632. Bumpers.
154 words·~1 min read·
/ut/title-41/chapter-6a/41-6a-1632A research copy — for the controlling text, always check the official state or federal source. Not legal advice.
Effective 5/12/2015
41-6a-1632. Bumpers.
(1)A motor vehicle shall be equipped with a bumper on both front and rear of the motor vehicle, except a motor vehicle that was not originally designed or manufactured with a bumper or bumpers.
(a)On a motor vehicle required to have bumpers under Subsection
(1), a bumper shall be:
(i)at least 4.5 inches in vertical height;
(ii)centered on the vehicle's center line; and
(iii)extend no less than the width of the respective wheel track distance.
(b)A bumper shall be securely mounted, horizontal load bearing, and attached to the motor vehicle's frame to effectively transfer impact when engaged.
(3)If a motor vehicle is originally or later equipped with a bumper, the bumper shall:
(a)be maintained in operational condition; and
(b)comply with this section.
(4)A violation of this section is an infraction.
Amended by Chapter 412 , 2015 General Session