Sec. 3. Test procedures
124 words·~1 min read·
/bill/117/s/5258/is/section-3A research copy — for the controlling text, always check the official state or federal source. Not legal advice.
Section 323(b) of the Energy Policy and Conservation Act ( 42 U.S.C. 6293(b) ) is amended by adding at the end the following: For compliance with the standards under section 325(ii)(1), the test procedure shall be AHAM AC–7–2022, and section 6.2 of ANSI/AHAM AC–1–2020 for Dust CADR and section 5.2 of ANSI/AHAM AC–1–2020 for Smoke CADR may be applied for the calculation of PM 2.5 . For compliance with the standards under section 325(ii)(2), the test procedure shall be AHAM AC–7–2022.
When considering amended standards for conventional room air cleaners that replace the standards under section 325(ii)(2), the Secretary shall consider amending the test procedure to include measurement of automatic mode, if such an inclusion would improve the accuracy of energy use measurements. .
Connectionstraces to 1
Traces to 1 document
U.S. Code